flash11
2.1.0.0
Here is a list of all macros with links to the files they belong to:
- d -
DEMO_TEXT_MESSAGE_1 :
main.c
DEMO_TEXT_MESSAGE_2 :
main.c
- f -
FLASH11_CMD_BLOCK_ERASE_32KB :
flash11.h
FLASH11_CMD_BLOCK_ERASE_4KB :
flash11.h
FLASH11_CMD_BLOCK_ERASE_64KB :
flash11.h
FLASH11_CMD_BYTE_PAGE_PROGRAM :
flash11.h
FLASH11_CMD_CHIP_ERASE :
flash11.h
FLASH11_CMD_DEEP_POWER_DOWN :
flash11.h
FLASH11_CMD_ENABLE_RESET :
flash11.h
FLASH11_CMD_ERASE_PROGRAM_RESUME :
flash11.h
FLASH11_CMD_ERASE_PROGRAM_SUSPEND :
flash11.h
FLASH11_CMD_ERASE_SECURITY_REG :
flash11.h
FLASH11_CMD_FAST_READ_ARRAY :
flash11.h
FLASH11_CMD_MANUFACTURER_ID :
flash11.h
FLASH11_CMD_PROGRAM_SECURITY_REG :
flash11.h
FLASH11_CMD_READ_ARRAY :
flash11.h
FLASH11_CMD_READ_JEDEC_ID :
flash11.h
FLASH11_CMD_READ_SECURITY_REG :
flash11.h
FLASH11_CMD_READ_SERIAL_FLASH_DP :
flash11.h
FLASH11_CMD_READ_STATUS_1 :
flash11.h
FLASH11_CMD_READ_STATUS_2 :
flash11.h
FLASH11_CMD_READ_STATUS_3 :
flash11.h
FLASH11_CMD_READ_UNIQUE_ID_NUM :
flash11.h
FLASH11_CMD_RESET_DEVICE :
flash11.h
FLASH11_CMD_RESUME_FROM_DPD :
flash11.h
FLASH11_CMD_VOLATILE_SR_WR_EN :
flash11.h
FLASH11_CMD_WRITE_DISABLE :
flash11.h
FLASH11_CMD_WRITE_ENABLE :
flash11.h
FLASH11_CMD_WRITE_STATUS_1 :
flash11.h
FLASH11_CMD_WRITE_STATUS_2 :
flash11.h
FLASH11_CMD_WRITE_STATUS_3 :
flash11.h
FLASH11_DEVICE_ID_0 :
flash11.h
FLASH11_DEVICE_ID_1 :
flash11.h
FLASH11_HOLD_DISABLE :
flash11.h
FLASH11_HOLD_ENABLE :
flash11.h
FLASH11_MANUFACTURER_ID :
flash11.h
FLASH11_MAP_MIKROBUS :
flash11.h
FLASH11_MAX_ADDRESS :
flash11.h
FLASH11_MIN_ADDRESS :
flash11.h
FLASH11_PAGE_SIZE :
flash11.h
FLASH11_SET_DATA_SAMPLE_EDGE :
flash11.h
FLASH11_SET_DATA_SAMPLE_MIDDLE :
flash11.h
FLASH11_STATUS1_BP0_BIT_MASK :
flash11.h
FLASH11_STATUS1_BP1_BIT_MASK :
flash11.h
FLASH11_STATUS1_BP2_BIT_MASK :
flash11.h
FLASH11_STATUS1_BP3_BIT_MASK :
flash11.h
FLASH11_STATUS1_BP4_BIT_MASK :
flash11.h
FLASH11_STATUS1_BSY :
flash11.h
FLASH11_STATUS1_RDY :
flash11.h
FLASH11_STATUS1_SRP0_BIT_MASK :
flash11.h
FLASH11_STATUS1_WEL_DIS :
flash11.h
FLASH11_STATUS1_WEL_EN :
flash11.h
FLASH11_WRITE_PROTECT_DISABLE :
flash11.h
FLASH11_WRITE_PROTECT_ENABLE :
flash11.h
- s -
SET_SPI_DATA_SAMPLE_EDGE :
spi_specifics.h
SET_SPI_DATA_SAMPLE_MIDDLE :
spi_specifics.h
STARTING_ADDRESS_1 :
main.c
STARTING_ADDRESS_2 :
main.c