Here is a list of all macros with links to the files they belong to:

- f -

FLASH5_CMD__RND_LOAD_DATA : flash5.h
FLASH5_CMD_BAD_BLOCK_MANAGE : flash5.h
FLASH5_CMD_BLOCK_ERASE : flash5.h
FLASH5_CMD_DEVICE_ID : flash5.h
FLASH5_CMD_EXECUTE : flash5.h
FLASH5_CMD_FAST_READ : flash5.h
FLASH5_CMD_FAST_READ_4BYTE_addr : flash5.h
FLASH5_CMD_FAST_READ_DUAL_IO : flash5.h
FLASH5_CMD_FAST_READ_DUAL_OUT : flash5.h
FLASH5_CMD_FAST_READ_DUAL_OUT_4BYTE_addr : flash5.h
FLASH5_CMD_FAST_READ_IO_4BYTE_addr : flash5.h
FLASH5_CMD_FAST_READ_QUAD_IO : flash5.h
FLASH5_CMD_FAST_READ_QUAD_IO_4BYTE_addr : flash5.h
FLASH5_CMD_FAST_READ_QUAD_OUT : flash5.h
FLASH5_CMD_FAST_READ_QUAD_OUT_4BYTE_addr : flash5.h
FLASH5_CMD_LAST_ECC_FAIL_PAGE : flash5.h
FLASH5_CMD_LOAD_DATA : flash5.h
FLASH5_CMD_PAGE_READ_DATA : flash5.h
FLASH5_CMD_QUAD_LOAD_DATA : flash5.h
FLASH5_CMD_QUAD_RND_LOAD_DATA : flash5.h
FLASH5_CMD_READ_BBM_TABLE : flash5.h
FLASH5_CMD_READ_DATA : flash5.h
FLASH5_CMD_READ_REG_STATUS1 : flash5.h
FLASH5_CMD_READ_REG_STATUS2 : flash5.h
FLASH5_CMD_RESET : flash5.h
FLASH5_CMD_WRITE_DISABLE : flash5.h
FLASH5_CMD_WRITE_ENABLE : flash5.h
FLASH5_CMD_WRITE_REG_STATUS1 : flash5.h
FLASH5_CMD_WRITE_REG_STATUS2 : flash5.h
FLASH5_DEVICE_ERROR : flash5.h
FLASH5_DEVICE_OK : flash5.h
FLASH5_INIT_ERROR : flash5.h
FLASH5_MAP_MIKROBUS : flash5.h
FLASH5_MAX_addr : flash5.h
FLASH5_OK : flash5.h
FLASH5_PAGESIZE : flash5.h
FLASH5_PIN_STATUS_HIGH : flash5.h
FLASH5_PIN_STATUS_LOW : flash5.h
FLASH5_REG_STATUS_1 : flash5.h
FLASH5_REG_STATUS_2 : flash5.h
FLASH5_REG_STATUS_3 : flash5.h
FLASH5_RETVAL : flash5.h
FLASH5_RS1_SRP1_ENABLE : flash5.h
FLASH5_RS1_SRP2_ENABLE : flash5.h
FLASH5_RS1_WRITE_PROTECTION_DISABLE : flash5.h
FLASH5_RS1_WRITE_PROTECTION_ENABLE : flash5.h
FLASH5_RS2_ECC_DISABLED : flash5.h
FLASH5_RS2_ECC_ENABLED : flash5.h
FLASH5_RS2_OTP_ACCESS : flash5.h
FLASH5_RS2_OTP_LOCK : flash5.h
FLASH5_RS2_PAGE_CONTINOUS_READ_MODE : flash5.h
FLASH5_RS2_PAGE_READ_MODE : flash5.h
FLASH5_RS2_REG_STATUS_1_LOCK : flash5.h