GSM/GNSS 2 click

GSM/GNSS 2 click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click carries SIM868 quad-band GSM/GPRS module.

click Product page

Click library

Author : Mikroe Team
Date : Mar 2022.
Type : UART type

Software Support

We provide a library for the GSM/GNSS 2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for GSM/GNSS 2 Click driver.

Standard key functions :

gsmgnss2_cfg_setup Config Object Initialization function.
void gsmgnss2_cfg_setup ( gsmgnss2_cfg_t *cfg );

gsmgnss2_cfg_setup
void gsmgnss2_cfg_setup(gsmgnss2_cfg_t *cfg)
GSM/GNSS 2 configuration object setup function.

gsmgnss2_cfg_t
GSM/GNSS 2 Click configuration object.
Definition gsmgnss2.h:192
gsmgnss2_init Initialization function.
err_t gsmgnss2_init ( gsmgnss2_t *ctx, gsmgnss2_cfg_t *cfg );

gsmgnss2_init
err_t gsmgnss2_init(gsmgnss2_t *ctx, gsmgnss2_cfg_t *cfg)
GSM/GNSS 2 initialization function.

gsmgnss2_t
GSM/GNSS 2 Click context object.
Definition gsmgnss2.h:166
gsmgnss2_module_power Power ON/OFF the module.
void gsmgnss2_module_power ( gsmgnss2_t *ctx, uint8_t state );

gsmgnss2_module_power
void gsmgnss2_module_power(gsmgnss2_t *ctx, uint8_t state)
Power ON/OFF the module.

Example key functions :

gsmgnss2_send_cmd Send command function.
void gsmgnss2_send_cmd ( gsmgnss2_t *ctx, char *cmd );

gsmgnss2_send_cmd
void gsmgnss2_send_cmd(gsmgnss2_t *ctx, char *cmd)
Send command function.
gsmgnss2_set_sim_apn Set sim card APN.
void gsmgnss2_set_sim_apn ( gsmgnss2_t *ctx, char *sim_apn );

gsmgnss2_set_sim_apn
void gsmgnss2_set_sim_apn(gsmgnss2_t *ctx, char *sim_apn)
Set sim card APN.
gsmgnss2_send_sms_pdu GSM GNSS send SMS in PDU mode.
err_t gsmgnss2_send_sms_pdu ( gsmgnss2_t *ctx, char *service_center_number, char *phone_number, char *sms_text );

gsmgnss2_send_sms_pdu
err_t gsmgnss2_send_sms_pdu(gsmgnss2_t *ctx, char *service_center_number, char *phone_number, char *sms_text)
GSM GNSS 2 send SMS in PDU mode.

Example Description

‍This example reads and processes data from GSM/GNSS 2 clicks.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and powers up the module, then sets default configuration for connecting the device to network.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  
    gsmgnss2_cfg_t gsmgnss2_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    gsmgnss2_cfg_setup( &gsmgnss2_cfg );
    GSMGNSS2_MAP_MIKROBUS( gsmgnss2_cfg, MIKROBUS_1 );
    gsmgnss2_init( &gsmgnss2, &gsmgnss2_cfg );
 
    gsmgnss2_module_power( &gsmgnss2, GSMGNSS2_MODULE_POWER_ON );
    
    // dummy read
    gsmgnss2_process( );
    gsmgnss2_clear_app_buf( );
    
    // AT
    gsmgnss2_send_cmd( &gsmgnss2, GSMGNSS2_CMD_AT );
    app_error_flag = gsmgnss2_rsp_check( );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // ATI - product information
    gsmgnss2_send_cmd( &gsmgnss2, GSMGNSS2_CMD_ATI );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // CGMR - firmware version
    gsmgnss2_send_cmd( &gsmgnss2, GSMGNSS2_CMD_CGMR );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // CMEE - Report Mobile Equipment Error
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CMEE, "2" );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // COPS - deregister from network
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_COPS, "2" );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // CGDCONT - set sim apn
    gsmgnss2_set_sim_apn( &gsmgnss2, SIM_APN );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // CFUN - full funtionality
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CFUN, "1" );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // COPS - automatic mode
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_COPS, "0" );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    // CREG - network registration status
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CREG, "1" );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // SMS message format - PDU mode
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CMGF, "0" );      
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    // QGNSSC - power ON GNSS
    gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CGNSPWR, "1" );
    app_error_flag = gsmgnss2_rsp_check(  );
    gsmgnss2_error_check( app_error_flag );
    Delay_ms ( 500 );
    
    app_buf_len = 0;
    app_buf_cnt = 0;
    app_connection_status = WAIT_FOR_CONNECTION;
    log_info( &logger, " Application Task " );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

Application Task

‍Waits for the device to connect to network, then waits for the GNSS position fix. Once it get a fix,

it sends an SMS with GNSS info to the selected phone number approximately every 40 seconds.

void application_task ( void )
{
    if ( app_connection_status == WAIT_FOR_CONNECTION )
    {
        // CREG - network registration status
        gsmgnss2_send_cmd_check( &gsmgnss2, GSMGNSS2_CMD_CREG );
        app_error_flag = gsmgnss2_rsp_check(  );
        gsmgnss2_error_check( app_error_flag );
        Delay_ms ( 500 );
        
        // CSQ - signal quality
        gsmgnss2_send_cmd( &gsmgnss2, GSMGNSS2_CMD_CSQ );
        app_error_flag = gsmgnss2_rsp_check(  );
        gsmgnss2_error_check( app_error_flag );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
    }
    else
    {
        log_info( &logger, "CONNECTED TO NETWORK" );
        
        for ( ; ; )
        {
            // Get GNSS info
            gnss_parser_flag = 1;
            gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CGNSTST, "1" );
            
            for ( ; ; )
            {
                if ( GSMGNSS2_OK == gsmgnss2_process( ) )
                {                    
                    gnss_parser_application( app_buf );
                            
                    if ( gnss_parser_flag == 2 ) 
                    {
                        gsmgnss2_send_cmd_with_parameter( &gsmgnss2, GSMGNSS2_CMD_CGNSTST, "0" ); 
                        app_error_flag = gsmgnss2_rsp_check(  );
                        gsmgnss2_error_check( app_error_flag );                      
                        log_printf( &logger, "> Sending message to phone number...\r\n" );
                        gsmgnss2_send_sms_pdu ( &gsmgnss2, SIM_SMSC, PHONE_NUMBER_TO_MESSAGE, gnss_info_message );      
                        app_error_flag = gsmgnss2_rsp_check(  );
                        gsmgnss2_error_check( app_error_flag );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                        Delay_ms ( 1000 );
                    }
                    if ( gnss_parser_flag != 1 ) 
                    {
                        break;
                    }
                }
            }            
        }
    }
}

Note

‍A passive GPS antenna is required for the GNSS to receive the position fix. It may take several minutes for the module to receive the fix. In order for the example to work, user needs to set the phone number to which he wants to send an SMS, and also will need to set an APN and SMSC (required for PDU mode only) of entered SIM card. Enter valid data for the following macros: SIM_APN, SIM_SMSC and PHONE_NUMBER_TO_MESSAGE.

‍Example:

SIM_APN "vipmobile"

SIM_SMSC "+381610401"

PHONE_NUMBER_TO_MESSAGE "+381659999999"

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

MikroSDK.Board
MikroSDK.Log
Click.GSMGNSS2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.