Main Page

---

Gyro click

Gyro click is an add-on board in mikroBUS form factor. It features L3GD20 three-axis digital gyroscope module capable of providing the measured angular rate, as well as ambient temperature.

click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : I2C type

Software Support

We provide a library for the Gyro Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for Gyro Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void gyro_cfg_setup ( gyro_cfg_t *cfg );

  - Initialization function.

  ‍GYRO_RETVAL gyro_init ( gyro_t *ctx, gyro_cfg_t *cfg );

• Click Default Configuration function.

  ‍void gyro_default_cfg ( gyro_t *ctx );

Example key functions :

• Function get data from two L3GD20 register.

  ‍int16_t gyro_get_axis( gyro_t *ctx, uint8_t adr_reg_low )

  - Function read Gyro X-axis, Y-axis and Z-axis axis.

  ‍void gyro_read_gyro( gyro_t *ctx, int16_t *gyro_x, int16_t *gyro_y, int16_t *gyro_z );

• Function read temperature data.

  ‍uint8_t gyro_read_temperature ( gyro_t *ctx );

  Examples Description

‍This example displays values of Gyro sensor (x, y, z axis)

The demo application is composed of two sections :

Application Init

‍Initialization driver, initialize L3GD20 register and start write log.

void application_init ( void )
{
    log_cfg_t log_cfg;
    gyro_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );
 
    //  Click initialization.
 
    gyro_cfg_setup( &cfg );
    GYRO_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    gyro_init( &gyro, &cfg );
    gyro_default_cfg ( &gyro);
}

Application Task

‍This is a example which demonstrates the use of Gyro Click board. Measured Gyro coordinates ( X-axis, Y-axis, Z-axis ) and temperature in degrees C are being sent to the Usart Terminal where you can track their changes. All data logs on usb uart for every 2 sec.

void application_task ( void )
{
    //  Task implementation.
 
    gyro_read_gyro(  &gyro, &gyrox,  &gyroy, &gyroz );
    temperature = gyro_read_temperature( &gyro );
 
    log_printf( &logger, " Axis X : %d \r\n", gyrox );
    log_printf( &logger, " Axis Y : %d \r\n", gyroy );
    log_printf( &logger, " Axis Z : %d \r\n", gyroz );
    log_printf( &logger, " Temp.: %.2f C\r\n", temperature );
 
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Gyro

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---