Main Page

---

H-Bridge 8 click

H-Bridge 8 Click is a compact add-on board that contains H-bridge current regulator. This board features the MP6519, a monolithic, step-down, current-source driver for applications that require accurate and fast current-response control from Monolithic Power Systems (MPS). It achieves excellent load and line regulation over a wide input supply range up to 28V. The four integrated MOSFET H-bridge control provide a fast dynamic load response and an ultra-high efficiency solution. Complete protection features include load open, load-short protection, over-current protection (OCP), over-temperature protection (OTP), and input over-voltage protection (OVP).

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Jul 2021.
• Type : PWM type

Software Support

We provide a library for the HBridge8 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for HBridge8 Click driver.

Standard key functions :

• hbridge8_cfg_setup Config Object Initialization function.

  void hbridge8_cfg_setup ( hbridge8_cfg_t *cfg );

• hbridge8_init Initialization function.

  err_t hbridge8_init ( hbridge8_t *ctx, hbridge8_cfg_t *cfg );

• hbridge8_default_cfg Click Default Configuration function.

  void hbridge8_default_cfg ( hbridge8_t *ctx );

Example key functions :

• hbridge8_set_mode H-Bridge 8 set operating mode function.

  err_t hbridge8_set_mode ( hbridge8_t *ctx, uint8_t mode );

• hbridge8_enable H-Bridge 8 set IC enable function.

  err_t hbridge8_enable ( hbridge8_t *ctx );

• hbridge8_set_duty_cycle H-Bridge 8 sets PWM duty cycle.

  err_t hbridge8_set_duty_cycle ( hbridge8_t *ctx, float duty_cycle );

Example Description

‍This library contains an API for the H-Bridge 8 Click driver. This demo application shows the use of a H-Bridge 8 Click board™.

The demo application is composed of two sections :

Application Init

‍Initialization of PWM module and log UART. After driver initialization, the app set duty cycle, start PWM and set motor drive the forward.

void application_init ( void ) 
{
    log_cfg_t log_cfg;            
    hbridge8_cfg_t hbridge8_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
 
    hbridge8_cfg_setup( &hbridge8_cfg );
    HBRIDGE8_MAP_MIKROBUS( hbridge8_cfg, MIKROBUS_1 );
    err_t init_flag  = hbridge8_init( &hbridge8, &hbridge8_cfg );
    if ( PWM_ERROR == init_flag )
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );
 
        for ( ; ; );
    }
 
    hbridge8_default_cfg ( &hbridge8 );
    Delay_ms ( 100 );
   
    hbridge8_set_mode( &hbridge8, HBRIDGE8_MODE_FORWARD );
    log_printf( &logger, "\r\n>>> Forward\r\n\r\n" );
    hbridge8_set_duty_cycle ( &hbridge8, 0.1 );
    hbridge8_pwm_start( &hbridge8 );
    Delay_ms ( 100 );
}

Application Task

‍This is an example that shows the use of an H-Bridge 8 Click board™. In this example, the app drives the motor forward/reverse and switched the PWM signal back and forth from 3% duty cycle to 8% duty cycle every 3000 milliseconds and back. Results are being sent to the Usart Terminal where you can track their changes.

void application_task ( void ) 
{
    static int8_t duty_cnt = 3;
    static int8_t duty_inc = 1;
    float duty = duty_cnt / 100.0;
    
    hbridge8_set_duty_cycle ( &hbridge8, duty );
    log_printf( &logger, "> Duty: %d%%\r\n", ( uint16_t )( duty_cnt ) );
 
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    if ( 8 == duty_cnt ) 
    {
        duty_inc = -1;
    }
    else if ( 3 == duty_cnt ) 
    {
        duty_inc = 1;
    }
    duty_cnt += duty_inc;
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.HBridge8

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---