Main Page

---

IR Gesture click

IR Gesture Click is a mikroBUS add-on board that enables contactless gesture recognition, along with ambient light and proximity sensing capabilities with the APDS-9960 IC. This sensor integrates an LED and four directional photodiodes that receive the reflecting light.

click Product page

---

Click library

• Author : MikroE Team
• Date : Jan 2020.
• Type : I2C type

Software Support

We provide a library for the IrGesture Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for IrGesture Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void irgesture_cfg_setup ( irgesture_cfg_t *cfg );

  - Initialization function.

  ‍IRGESTURE_RETVAL irgesture_init ( irgesture_t *ctx, irgesture_cfg_t *cfg );

• Click Default Configuration function.

  ‍void irgesture_default_cfg ( irgesture_t *ctx );

Example key functions :

• Function starts the gesture recognition engine on the APDS-9960 IC on IR Gesture Click.

  ‍void irgesture_enable_gesture_sensor ( irgesture_t *ctx )

• Function processes a gesture event and returns best guessed position engine on IR Gesture Click.

  ‍uint8_t irgesture_detect_gesture ( irgesture_t *ctx );

  - Function compares input data and returns position of gesture

  ‍static uint8_t compare_data ( uint8_t value0, uint8_t value1, uint8_t value2, uint8_t value3 )

Examples Description

‍This Click enables contactless gesture recognition: basic directional swipes (up, down, left or right).

The demo application is composed of two sections :

Application Init

‍Initialization driver enable's - I2C, set default configuration, enable geasture sensor and start write log.

void application_init ( void )
{
    log_cfg_t log_cfg;
    irgesture_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );
 
    //  Click initialization.
 
    irgesture_cfg_setup( &cfg );
    IRGESTURE_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    irgesture_init( &irgesture, &cfg );
    irgesture_default_cfg( &irgesture );
}

Application Task

‍This is a example which demonstrates the use of IR Gesture Click board. IR Gesture Click detects gestures and sends the movement to terminal every 1 second.

void application_task ( void )
{
    position = irgesture_detect_gesture( &irgesture );
 
    if ( position_old != position )
    {
        if ( position == IRGESTURE_FAR )
        {
            log_printf( &logger, "       F A R        \r\n" );
        }
        if ( position == IRGESTURE_RIGHT )
        {
            log_printf( &logger, "     R I G H T      \r\n" );
        }
        if ( position == IRGESTURE_LEFT )
        {
            log_printf( &logger, "      L E F T       \r\n" );
        }
        if ( position == IRGESTURE_UP )
        {
            log_printf( &logger, "        U P         \r\n" );
        }
        if ( position == IRGESTURE_DOWN )
        {
            log_printf( &logger, "      D O W N       \r\n" );
        }
        if ( position == IRGESTURE_NEAR )
        {
            log_printf( &logger, "      N E A R       \r\n" );
        }
 
        position_old = position;
        log_printf( &logger, "--------------------\r\n" );
 
        Delay_ms ( 1000 );
    }
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.IrGesture

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---