irthermo2 2.0.0.0
Main Page

IrThermo 2 click

IrThermo 2 click is a non-contact temperature measurement solution. The click board carries the TMP007 infrared thermopile sensor with an integrated math engine.

click Product page


Click library

  • Author : MikroE Team
  • Date : maj 2020.
  • Type : I2C type

Software Support

We provide a library for the IrThermo2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for IrThermo2 Click driver.

Standard key functions :

  • irthermo2_cfg_setup Config Object Initialization function.
    void irthermo2_cfg_setup(irthermo2_cfg_t *cfg)
    Config Object Initialization function.
    Click configuration structure definition.
    Definition irthermo2.h:183
  • irthermo2_init Initialization function.
    err_t irthermo2_init(irthermo2_t *ctx, irthermo2_cfg_t *cfg)
    Initialization function.
    Click ctx object definition.
    Definition irthermo2.h:166
  • irthermo2_default_cfg Click Default Configuration function.
    c
    void irthermo2_default_cfg ( irthermo2_t *ctx );

Example key functions :

Examples Description

‍IrThermo 2 is a non-contact temperature measurement click. The sensor absorbs the infrared radiation emitted by the target object (withing the sensor’s field of view) and the integrated math engine calculates its temperature by comparing it with the temperature of the silicon die. The measurement range of the sensor is between –40°C to 125°C.

The demo application is composed of two sections :

Application Init

‍Initialization driver enable's - I2C, set default configuration and start write log.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
IRTHERMO2_MAP_MIKROBUS( cfg, MIKROBUS_1 );
irthermo2_init( &irthermo2, &cfg );
irthermo2_default_cfg( &irthermo2 );
Delay_ms ( 100 );
}
#define IRTHERMO2_MAP_MIKROBUS(cfg, mikrobus)
MikroBUS pin mapping.
Definition irthermo2.h:151
void irthermo2_default_cfg(irthermo2_t *ctx)
Click Default Configuration function.
void application_init(void)
Definition main.c:38

Application Task

‍This is a example which demonstrates the use of IrThermo 2 Click board. Measures the object temperature value from sensor and calculate temperature in degrees Celsius [ C ]. Results are being sent to the USART Terminal where you can track their changes. All data logs on usb uart for aproximetly every 5 sec when the data value changes.

void application_task ( void )
{
temperature = irthermo2_get_object_temperature_c( &irthermo2 );
log_printf( &logger, " Temperature : %.2f C\r\n", temperature );
log_printf( &logger, "---------------------------\r\n" );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
}
void application_task(void)
Definition main.c:67

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.IrThermo2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.