Main Page

---

Led ring R click

LED ring R click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 74HC595 serial-in, parallel-out shift registers.

click Product page

---

Click library

• Author : MikroE Team
• Date : May 2020.
• Type : SPI type

Software Support

We provide a library for the LedringR Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for LedringR Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void ledringr_cfg_setup ( ledringr_cfg_t *cfg );

  - Initialization function.

  ‍LEDRINGR_RETVAL ledringr_init ( ledringr_t *ctx, ledringr_cfg_t *cfg );

• Generic transfer function.

  ‍void ledringr_generic_transfer ( ledringr_t *ctx, spi_master_transfer_data_t *block );

Example key functions :

• Generic write function.

  ‍void ledringr_write_data ( ledringr_t *ctx, uint32_t data_to_write );

  - Turn On LED by position.

  ‍void ledringr_turn_on_led ( ledringr_t *ctx, uint8_t led_position );

• Set led.

  ‍void ledringr_led_ring_set ( ledringr_t *ctx );

  Examples Description

‍LED ring R click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven.

The demo application is composed of two sections :

Application Init

‍Initializes SPI driver and performs device configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;
    ledringr_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );
 
    ledringr_cfg_setup( &cfg );
    LEDRINGR_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    ledringr_init( &ledringr, &cfg );
}

Application Task

‍Show functionality of Led_Ring_R Click, rotating and turn on/off led's, using the SPI interface.

void application_task ( void )
{
    uint32_t ring_led_on = 0x00000001;
    uint8_t ring_led_counter;
    uint8_t number_led;
 
    ledringr_led_ring_set( &ledringr );
 
    for ( ring_led_counter = 32; ring_led_counter > 0; ring_led_counter--)
    {
        ledringr_turn_on_led( &ledringr, ring_led_counter );
        Delay_100ms( );
    }
 
    Delay_100ms( );
 
    while ( ring_led_on < 0xFFFFFFFF )
    {
        ledringr_write_data( &ledringr, ring_led_on );
        ring_led_on = ring_led_on | (ring_led_on << 1);
        Delay_100ms( );
    }
    ledringr_write_data( &ledringr, ring_led_on );
 
    while ( ring_led_on > 0x00000001 )
    {
        ledringr_write_data( &ledringr, ring_led_on );
        ring_led_on = ring_led_on >> 1;
        Delay_100ms( );
    }
    ledringr_write_data( &ledringr, ring_led_on );
 
    Delay_100ms( );
 
    ring_led_on = 0x11111111;
    for ( ring_led_counter = 0; ring_led_counter < 32; ring_led_counter++ )
    {
        ledringr_write_data( &ledringr, ring_led_on );
 
        ring_led_on *= 2;
 
        if ( ring_led_on == 0x88888888 )
        {
            ring_led_on = 0x11111111;
        }
            
        Delay_100ms( );
    }
    
    for ( ring_led_counter = 0; ring_led_counter < 16; ring_led_counter++ )
    {
        ledringr_write_data( &ledringr, 0xAAAAAAAA );
        Delay_100ms( );
        
        ledringr_write_data( &ledringr, 0x55555555 );
        Delay_100ms( );
    }
 
    ledringr_led_ring_reset( &ledringr );
 
    Delay_1sec( );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.LedringR

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---