Main Page

---

Magneto 13 click

‍Magneto 13 Click is a compact add-on board with an accurate and reliable magnetic device. This board features the MA736, a contactless digital angle sensor from Monolithic Power Systems. It is a MagAlpha sensor that detects the absolute angular position of a permanent magnet, typically a diametrically magnetized cylinder or a rotating shaft. The MA736 sensor supports a wide range of magnetic field strengths, end-of-shaft, and side-shaft (off-axis mounting) spatial configurations.

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Apr 2023.
• Type : SPI type

Software Support

We provide a library for the Magneto 13 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for Magneto 13 Click driver.

Standard key functions :

• magneto13_cfg_setup Config Object Initialization function.

  void magneto13_cfg_setup ( magneto13_cfg_t *cfg );

• magneto13_init Initialization function.

  err_t magneto13_init ( magneto13_t *ctx, magneto13_cfg_t *cfg );

• magneto13_default_cfg Click Default Configuration function.

  err_t magneto13_default_cfg ( magneto13_t *ctx );

Example key functions :

• magneto13_get_angle Magneto 13 gets the angular position function.

  err_t magneto13_get_angle ( magneto13_t *ctx, float *angle );

• magneto13_get_field_strength Magneto 13 gets the magnetic field strength function.

  err_t magneto13_get_field_strength ( magneto13_t *ctx, uint8_t *field_strength );

• magneto13_set_mag_field_thd Magneto 13 sets the magnetic field threshold function.

  err_t magneto13_set_mag_field_thd ( magneto13_t *ctx, uint8_t mglt, uint8_t mght );

Example Description

‍This library contains API for the Magneto 13 Click driver. The demo application reads and displays the magnet's angular position in degrees.

The demo application is composed of two sections :

Application Init

‍Initialization of SPI module and log UART. After driver initialization, the app executes a default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    magneto13_cfg_t magneto13_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    magneto13_cfg_setup( &magneto13_cfg );
    MAGNETO13_MAP_MIKROBUS( magneto13_cfg, MIKROBUS_1 );
    if ( SPI_MASTER_ERROR == magneto13_init( &magneto13, &magneto13_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( MAGNETO13_ERROR == magneto13_default_cfg ( &magneto13 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
    log_printf( &logger, " -------------------- \r\n" );
    Delay_ms ( 100 );
}

Application Task

‍This example demonstrates the use of the Magneto 13 Click board™. Reads and displays the magnet's angular position in degrees. Results are being sent to the UART Terminal, where you can track their changes.

void application_task ( void )
{
    static uint8_t field_strength = 0;
    static float angle = 0;
    if ( MAGNETO13_OK == magneto13_get_field_strength( &magneto13, &field_strength ) )
    {
        if ( ( MAGNETO13_FLD_ST_OK == field_strength ) && ( MAGNETO13_OK == magneto13_get_angle( &magneto13, &angle ) ) )
        {
            log_printf( &logger, " Angle: %.2f [deg]\r\n", angle );
            log_printf( &logger, " -------------------- \r\n" );
            Delay_ms ( 1000 );
        }
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Magneto13

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---