Settings for registers of NeoMesh 915MHz Click driver. More...

Macros
#define	NEOMESH915MHZ_CMD_NACK_SEND 0x02
	NeoMesh 915MHz AAPI control commands.

#define	NEOMESH915MHZ_CMD_ACK_SEND 0x03

#define	NEOMESH915MHZ_CMD_NODE_STATUS 0x07

#define	NEOMESH915MHZ_CMD_NODE_INFO 0x08

#define	NEOMESH915MHZ_CMD_NEIGHBOUR_LIST 0x09

#define	NEOMESH915MHZ_CMD_NETWORK_COMMAND 0x0A

#define	NEOMESH915MHZ_CMD_SAPI_TO_AAPI 0x0B

#define	NEOMESH915MHZ_CMD_ROUTE_INFO 0x0C

#define	NEOMESH915MHZ_CMD_WES_COMMAND 0x10

#define	NEOMESH915MHZ_CMD_WES_SETUP_RSP 0x11

#define	NEOMESH915MHZ_CMD_GET_SW_VERSION 0x14

#define	NEOMESH915MHZ_CMD_ALT_MODE 0x20

#define	NEOMESH915MHZ_RSP_ACK 0x50
	NeoMesh 915MHz application data response.

#define	NEOMESH915MHZ_RSP_NACK 0x51

#define	NEOMESH915MHZ_RSP_ACK_HOST 0x52

#define	NEOMESH915MHZ_RSP_ACK_HOST_HAPA 0x53

#define	NEOMESH915MHZ_RSP_NACK_HOST 0x54

#define	NEOMESH915MHZ_RSP_NACK_HOST_HAPA 0x55

#define	NEOMESH915MHZ_RSP_NACK_SEND 0x56

#define	NEOMESH915MHZ_RSP_NACK_DROP 0x57

#define	NEOMESH915MHZ_RSP_NODE_INFO 0x58

#define	NEOMESH915MHZ_RSP_NEIGHBOUR_LIST 0x59

#define	NEOMESH915MHZ_RSP_NETWORK_COMMAND 0x5A

#define	NEOMESH915MHZ_RSP_ROUTE_INFO 0x5C

#define	NEOMESH915MHZ_RSP_WES_STATUS 0x60

#define	NEOMESH915MHZ_RSP_WES_SETUP 0x61

#define	NEOMESH915MHZ_RSP_GET_SW_VERSION 0x64

#define	NEOMESH915MHZ_RSP_ALT_MODE 0x70

#define	NEOMESH915MHZ_SAPI_CMD_LOGIN 0x0103u
	NeoMesh 915MHz SAPI control commands.

#define	NEOMESH915MHZ_SAPI_CMD_RESET_LIST_ITERATOR 0x0104u

#define	NEOMESH915MHZ_SAPI_CMD_GET_LIST 0x0105u

#define	NEOMESH915MHZ_SAPI_CMD_GET_SETTING_FLASH 0x0106u

#define	NEOMESH915MHZ_SAPI_CMD_GET_SETTING_RAM 0x0107u

#define	NEOMESH915MHZ_SAPI_CMD_COMMIT_SETTINGS 0x0108u

#define	NEOMESH915MHZ_SAPI_CMD_DISCARD_SETTINGS 0x0109u

#define	NEOMESH915MHZ_SAPI_CMD_SET_SETTING 0x010Au

#define	NEOMESH915MHZ_SAPI_CMD_START_PROTOCOL_STACK 0x0112u

#define	NEOMESH915MHZ_SAPI_CMD_START_BOOTLOADER 0x0113u

#define	NEOMESH915MHZ_SAPI_HEADER 0x3E

#define	NEOMESH915MHZ_SAPI_TRAIL 0x21

#define	NEOMESH915MHZ_SAPI_RSP_OK 0x0380u
	NeoMesh 915MHz system data response.

#define	NEOMESH915MHZ_SAPI_RSP_ERROR 0x0381u

#define	NEOMESH915MHZ_SAPI_RSP_BOOTLOADER_START 0x0382u

#define	NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_START 0x0383u

#define	NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_ERROR 0x0384u

#define	NEOMESH915MHZ_SAPI_RSP_RESET 0x0385u

#define	NEOMESH915MHZ_SAPI_RSP_SETTINGS_LIST_OUTPUT 0x0185u

#define	NEOMESH915MHZ_SAPI_RSP_SETTINGS_VALUE 0x0186u

#define	NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_0 0x4C
	NeoMesh 915MHz login password settings.

#define	NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_1 0x76

#define	NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_2 0x6C

#define	NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_3 0x31

#define	NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_4 0x30

#define	NEOMESH915MHZ_SAPI_SETTINGS_ID_NODE_ID 0x0A
	NeoMesh 915MHz SAPI settings ID.

#define	NEOMESH915MHZ_TIMEOUT_MS 20000ul
	NeoMesh 915MHz CTS/WUP timeout wait.

#define	NEOMESH915MHZ_MAX_PAYLOAD_LEN 255
	NeoMesh 915MHz payload length.

#define	NEOMESH915MHZ_TX_DRV_BUFFER_SIZE 300u
	NeoMesh 915MHz driver buffer size.

#define	NEOMESH915MHZ_RX_DRV_BUFFER_SIZE 300u

Detailed Description

Settings for registers of NeoMesh 915MHz Click driver.

Macro Definition Documentation

◆ NEOMESH915MHZ_CMD_ACK_SEND

#define NEOMESH915MHZ_CMD_ACK_SEND 0x03

◆ NEOMESH915MHZ_CMD_ALT_MODE

#define NEOMESH915MHZ_CMD_ALT_MODE 0x20

◆ NEOMESH915MHZ_CMD_GET_SW_VERSION

#define NEOMESH915MHZ_CMD_GET_SW_VERSION 0x14

◆ NEOMESH915MHZ_CMD_NACK_SEND

#define NEOMESH915MHZ_CMD_NACK_SEND 0x02

NeoMesh 915MHz AAPI control commands.

Specified setting for AAPI control commands of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_CMD_NEIGHBOUR_LIST

#define NEOMESH915MHZ_CMD_NEIGHBOUR_LIST 0x09

◆ NEOMESH915MHZ_CMD_NETWORK_COMMAND

#define NEOMESH915MHZ_CMD_NETWORK_COMMAND 0x0A

◆ NEOMESH915MHZ_CMD_NODE_INFO

#define NEOMESH915MHZ_CMD_NODE_INFO 0x08

◆ NEOMESH915MHZ_CMD_NODE_STATUS

#define NEOMESH915MHZ_CMD_NODE_STATUS 0x07

◆ NEOMESH915MHZ_CMD_ROUTE_INFO

#define NEOMESH915MHZ_CMD_ROUTE_INFO 0x0C

◆ NEOMESH915MHZ_CMD_SAPI_TO_AAPI

#define NEOMESH915MHZ_CMD_SAPI_TO_AAPI 0x0B

◆ NEOMESH915MHZ_CMD_WES_COMMAND

#define NEOMESH915MHZ_CMD_WES_COMMAND 0x10

◆ NEOMESH915MHZ_CMD_WES_SETUP_RSP

#define NEOMESH915MHZ_CMD_WES_SETUP_RSP 0x11

◆ NEOMESH915MHZ_MAX_PAYLOAD_LEN

#define NEOMESH915MHZ_MAX_PAYLOAD_LEN 255

NeoMesh 915MHz payload length.

Specified setting for payload length of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_RSP_ACK

#define NEOMESH915MHZ_RSP_ACK 0x50

NeoMesh 915MHz application data response.

Specified setting for application data response of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_RSP_ACK_HOST

#define NEOMESH915MHZ_RSP_ACK_HOST 0x52

◆ NEOMESH915MHZ_RSP_ACK_HOST_HAPA

#define NEOMESH915MHZ_RSP_ACK_HOST_HAPA 0x53

◆ NEOMESH915MHZ_RSP_ALT_MODE

#define NEOMESH915MHZ_RSP_ALT_MODE 0x70

◆ NEOMESH915MHZ_RSP_GET_SW_VERSION

#define NEOMESH915MHZ_RSP_GET_SW_VERSION 0x64

◆ NEOMESH915MHZ_RSP_NACK

#define NEOMESH915MHZ_RSP_NACK 0x51

◆ NEOMESH915MHZ_RSP_NACK_DROP

#define NEOMESH915MHZ_RSP_NACK_DROP 0x57

◆ NEOMESH915MHZ_RSP_NACK_HOST

#define NEOMESH915MHZ_RSP_NACK_HOST 0x54

◆ NEOMESH915MHZ_RSP_NACK_HOST_HAPA

#define NEOMESH915MHZ_RSP_NACK_HOST_HAPA 0x55

◆ NEOMESH915MHZ_RSP_NACK_SEND

#define NEOMESH915MHZ_RSP_NACK_SEND 0x56

◆ NEOMESH915MHZ_RSP_NEIGHBOUR_LIST

#define NEOMESH915MHZ_RSP_NEIGHBOUR_LIST 0x59

◆ NEOMESH915MHZ_RSP_NETWORK_COMMAND

#define NEOMESH915MHZ_RSP_NETWORK_COMMAND 0x5A

◆ NEOMESH915MHZ_RSP_NODE_INFO

#define NEOMESH915MHZ_RSP_NODE_INFO 0x58

◆ NEOMESH915MHZ_RSP_ROUTE_INFO

#define NEOMESH915MHZ_RSP_ROUTE_INFO 0x5C

◆ NEOMESH915MHZ_RSP_WES_SETUP

#define NEOMESH915MHZ_RSP_WES_SETUP 0x61

◆ NEOMESH915MHZ_RSP_WES_STATUS

#define NEOMESH915MHZ_RSP_WES_STATUS 0x60

◆ NEOMESH915MHZ_RX_DRV_BUFFER_SIZE

#define NEOMESH915MHZ_RX_DRV_BUFFER_SIZE 300u

◆ NEOMESH915MHZ_SAPI_CMD_COMMIT_SETTINGS

#define NEOMESH915MHZ_SAPI_CMD_COMMIT_SETTINGS 0x0108u

◆ NEOMESH915MHZ_SAPI_CMD_DISCARD_SETTINGS

#define NEOMESH915MHZ_SAPI_CMD_DISCARD_SETTINGS 0x0109u

◆ NEOMESH915MHZ_SAPI_CMD_GET_LIST

#define NEOMESH915MHZ_SAPI_CMD_GET_LIST 0x0105u

◆ NEOMESH915MHZ_SAPI_CMD_GET_SETTING_FLASH

#define NEOMESH915MHZ_SAPI_CMD_GET_SETTING_FLASH 0x0106u

◆ NEOMESH915MHZ_SAPI_CMD_GET_SETTING_RAM

#define NEOMESH915MHZ_SAPI_CMD_GET_SETTING_RAM 0x0107u

◆ NEOMESH915MHZ_SAPI_CMD_LOGIN

#define NEOMESH915MHZ_SAPI_CMD_LOGIN 0x0103u

NeoMesh 915MHz SAPI control commands.

Specified setting for SAPI control commands of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_SAPI_CMD_RESET_LIST_ITERATOR

#define NEOMESH915MHZ_SAPI_CMD_RESET_LIST_ITERATOR 0x0104u

◆ NEOMESH915MHZ_SAPI_CMD_SET_SETTING

#define NEOMESH915MHZ_SAPI_CMD_SET_SETTING 0x010Au

◆ NEOMESH915MHZ_SAPI_CMD_START_BOOTLOADER

#define NEOMESH915MHZ_SAPI_CMD_START_BOOTLOADER 0x0113u

◆ NEOMESH915MHZ_SAPI_CMD_START_PROTOCOL_STACK

#define NEOMESH915MHZ_SAPI_CMD_START_PROTOCOL_STACK 0x0112u

◆ NEOMESH915MHZ_SAPI_HEADER

#define NEOMESH915MHZ_SAPI_HEADER 0x3E

◆ NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_0

#define NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_0 0x4C

NeoMesh 915MHz login password settings.

Specified setting for login password of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_1

#define NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_1 0x76

◆ NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_2

#define NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_2 0x6C

◆ NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_3

#define NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_3 0x31

◆ NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_4

#define NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_4 0x30

◆ NEOMESH915MHZ_SAPI_RSP_BOOTLOADER_START

#define NEOMESH915MHZ_SAPI_RSP_BOOTLOADER_START 0x0382u

◆ NEOMESH915MHZ_SAPI_RSP_ERROR

#define NEOMESH915MHZ_SAPI_RSP_ERROR 0x0381u

◆ NEOMESH915MHZ_SAPI_RSP_OK

#define NEOMESH915MHZ_SAPI_RSP_OK 0x0380u

NeoMesh 915MHz system data response.

Specified setting for system data response of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_ERROR

#define NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_ERROR 0x0384u

◆ NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_START

#define NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_START 0x0383u

◆ NEOMESH915MHZ_SAPI_RSP_RESET

#define NEOMESH915MHZ_SAPI_RSP_RESET 0x0385u

◆ NEOMESH915MHZ_SAPI_RSP_SETTINGS_LIST_OUTPUT

#define NEOMESH915MHZ_SAPI_RSP_SETTINGS_LIST_OUTPUT 0x0185u

◆ NEOMESH915MHZ_SAPI_RSP_SETTINGS_VALUE

#define NEOMESH915MHZ_SAPI_RSP_SETTINGS_VALUE 0x0186u

◆ NEOMESH915MHZ_SAPI_SETTINGS_ID_NODE_ID

#define NEOMESH915MHZ_SAPI_SETTINGS_ID_NODE_ID 0x0A

NeoMesh 915MHz SAPI settings ID.

Specified setting for SAPI settings ID of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_SAPI_TRAIL

#define NEOMESH915MHZ_SAPI_TRAIL 0x21

◆ NEOMESH915MHZ_TIMEOUT_MS

#define NEOMESH915MHZ_TIMEOUT_MS 20000ul

NeoMesh 915MHz CTS/WUP timeout wait.

Specified setting for CTS/WUP timeout wait of NeoMesh 915MHz Click driver.

◆ NEOMESH915MHZ_TX_DRV_BUFFER_SIZE

#define NEOMESH915MHZ_TX_DRV_BUFFER_SIZE 300u

NeoMesh 915MHz driver buffer size.

Specified size of driver ring buffer.

Note: Increase buffer size if needed.

Macros