Main Page

---

NeoMesh 915MHz click

‍NeoMesh Click - 915MHz is a compact add-on board with a low-power, long-range transceiver, ideal for Mesh wireless networking. This board features the NC1000C-9, a wireless Mesh network module from NeoCortec. With an additional antenna that MikroE offers connected to the module’s u.Fl connector, you can create a fully functional wireless Mesh network node that will work in the Sub-GHz frequency band of 915MHz. The module has a generic application layer that can configured to suit applications.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Sep 2023.
• Type : UART type

Software Support

We provide a library for the NeoMesh 915MHz Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for NeoMesh 915MHz Click driver.

Standard key functions :

• neomesh915mhz_cfg_setup Config Object Initialization function.

  void neomesh915mhz_cfg_setup ( neomesh915mhz_cfg_t *cfg );

• neomesh915mhz_init Initialization function.

  err_t neomesh915mhz_init ( neomesh915mhz_t *ctx, neomesh915mhz_cfg_t *cfg );

Example key functions :

• neomesh915mhz_send_aapi_frame This function sends a desired AAPI frame by using UART serial interface.

  err_t neomesh915mhz_send_aapi_frame ( neomesh915mhz_t *ctx, neomesh915mhz_aapi_frame_t *frame );

• neomesh915mhz_read_aapi_frame This function reads an AAPI frame by using UART serial interface.

  err_t neomesh915mhz_read_aapi_frame ( neomesh915mhz_t *ctx, neomesh915mhz_aapi_frame_t *frame );

• neomesh915mhz_send_sapi_frame This function sends a desired SAPI frame by using UART serial interface.

  err_t neomesh915mhz_send_sapi_frame ( neomesh915mhz_t *ctx, neomesh915mhz_sapi_frame_t *frame );

Example Description

‍This example demonstrates the use of NeoMesh 915MHz click board by showing the communication between the two click boards.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and configures the click board for the selected application mode.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    neomesh915mhz_cfg_t neomesh915mhz_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    neomesh915mhz_cfg_setup( &neomesh915mhz_cfg );
    NEOMESH915MHZ_MAP_MIKROBUS( neomesh915mhz_cfg, MIKROBUS_1 );
    if ( UART_ERROR == neomesh915mhz_init( &neomesh915mhz, &neomesh915mhz_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    log_printf( &logger, "\r\n Enable SAPI over AAPI\r\n" );
    aapi_frame.cmd = NEOMESH915MHZ_CMD_SAPI_TO_AAPI;
    aapi_frame.len = 0;
    neomesh915mhz_send_aapi_frame ( &neomesh915mhz, &aapi_frame );
    neomesh915mhz_parse_sapi_rsp ( NEOMESH915MHZ_SAPI_RSP_BOOTLOADER_START );
    
    log_printf( &logger, "\r\n Login with password\r\n" );
    sapi_frame.cmd = NEOMESH915MHZ_SAPI_CMD_LOGIN;
    sapi_frame.len = 5;
    sapi_frame.payload[ 0 ] = NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_0;
    sapi_frame.payload[ 1 ] = NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_1;
    sapi_frame.payload[ 2 ] = NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_2;
    sapi_frame.payload[ 3 ] = NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_3;
    sapi_frame.payload[ 4 ] = NEOMESH915MHZ_SAPI_LOGIN_PASSWORD_4;
    neomesh915mhz_send_sapi_frame ( &neomesh915mhz, &sapi_frame );
    neomesh915mhz_parse_sapi_rsp ( NEOMESH915MHZ_SAPI_RSP_OK );
    
    log_printf( &logger, "\r\n Set NODE ID to: " );
    sapi_frame.cmd = NEOMESH915MHZ_SAPI_CMD_SET_SETTING;
    sapi_frame.len = 3;
    sapi_frame.payload[ 0 ] = NEOMESH915MHZ_SAPI_SETTINGS_ID_NODE_ID;
#if ( DEMO_APP == APP_RECEIVER_1 )
    log_printf( &logger, "%.4X\r\n", ( uint16_t ) NODE_ID_RECEIVER_1 );
    sapi_frame.payload[ 1 ] = ( uint8_t ) ( ( NODE_ID_RECEIVER_1 >> 8 ) & 0xFF );
    sapi_frame.payload[ 2 ] = ( uint8_t ) ( NODE_ID_RECEIVER_1 & 0xFF );
#elif ( DEMO_APP == APP_RECEIVER_2 )
    log_printf( &logger, "%.4X\r\n", ( uint16_t ) NODE_ID_RECEIVER_2 );
    sapi_frame.payload[ 1 ] = ( uint8_t ) ( ( NODE_ID_RECEIVER_2 >> 8 ) & 0xFF );
    sapi_frame.payload[ 2 ] = ( uint8_t ) ( NODE_ID_RECEIVER_2 & 0xFF );
#elif ( DEMO_APP == APP_ORIGINATOR )
    log_printf( &logger, "%.4X\r\n", ( uint16_t ) NODE_ID_ORIGINATOR );
    sapi_frame.payload[ 1 ] = ( uint8_t ) ( ( NODE_ID_ORIGINATOR >> 8 ) & 0xFF );
    sapi_frame.payload[ 2 ] = ( uint8_t ) ( NODE_ID_ORIGINATOR & 0xFF );
#endif
    neomesh915mhz_send_sapi_frame ( &neomesh915mhz, &sapi_frame );
    neomesh915mhz_parse_sapi_rsp ( NEOMESH915MHZ_SAPI_RSP_OK );
    
    log_printf( &logger, "\r\n Commit settings\r\n" );
    sapi_frame.cmd = NEOMESH915MHZ_SAPI_CMD_COMMIT_SETTINGS;
    sapi_frame.len = 0;
    neomesh915mhz_send_sapi_frame ( &neomesh915mhz, &sapi_frame );
    neomesh915mhz_parse_sapi_rsp ( NEOMESH915MHZ_SAPI_RSP_OK );
    
    log_printf( &logger, "\r\n Start protocol stack\r\n" );
    sapi_frame.cmd = NEOMESH915MHZ_SAPI_CMD_START_PROTOCOL_STACK;
    sapi_frame.len = 0;
    neomesh915mhz_send_sapi_frame ( &neomesh915mhz, &sapi_frame );
    neomesh915mhz_parse_sapi_rsp ( NEOMESH915MHZ_SAPI_RSP_PROTOCOL_STACK_START );
    // Wait for the device to actually switch back to application layer
    while ( !neomesh915mhz_get_cts_pin ( &neomesh915mhz ) );
    
    log_printf( &logger, "\r\n Get NODE info\r\n" );
    aapi_frame.cmd = NEOMESH915MHZ_CMD_NODE_INFO;
    aapi_frame.len = 0;
    neomesh915mhz_send_aapi_frame ( &neomesh915mhz, &aapi_frame );
    neomesh915mhz_parse_aapi_rsp ( NEOMESH915MHZ_RSP_NODE_INFO );
    
    log_printf( &logger, "\r\n Get neighbour list\r\n" );
    aapi_frame.cmd = NEOMESH915MHZ_CMD_NEIGHBOUR_LIST;
    aapi_frame.len = 0;
    neomesh915mhz_send_aapi_frame ( &neomesh915mhz, &aapi_frame );
    neomesh915mhz_parse_aapi_rsp ( NEOMESH915MHZ_RSP_NEIGHBOUR_LIST );
    
#if ( DEMO_APP == APP_RECEIVER_1 )
    log_printf( &logger, "\r\n Application Mode: Receiver 1\r\n" );
#elif ( DEMO_APP == APP_RECEIVER_2 )
    log_printf( &logger, "\r\n Application Mode: Receiver 2\r\n" );
#elif ( DEMO_APP == APP_ORIGINATOR )
    log_printf( &logger, "\r\n Application Mode: Originator\r\n" );
#else
    #error "Selected application mode is not supported!"
#endif
    
    log_info( &logger, " Application Task " );
}

Application Task

‍One click board should be set to originator mode and the others to receiver 1 or 2.

If the SINGLE_RECEIVER_MODE is enabled, the originator device sends a desired message to RECEIVER_1 node and waits for an acknowledge response, otherwise it sends the same message to both RECEIVER_1 and RECEIVER_2 nodes. The receiver devices reads and parses all incoming AAPI frames and displays them on the USB UART.

void application_task ( void )
{
#if ( DEMO_APP == APP_ORIGINATOR )
    log_printf( &logger, "\r\n Send message to node: %.4X\r\n", ( uint16_t ) NODE_ID_RECEIVER_1 );
    aapi_frame.cmd = NEOMESH915MHZ_CMD_ACK_SEND;
    aapi_frame.len = 3 + strlen ( DEMO_TEXT_MESSAGE );
    aapi_frame.payload[ 0 ] = ( uint8_t ) ( ( NODE_ID_RECEIVER_1 >> 8 ) & 0xFF );
    aapi_frame.payload[ 1 ] = ( uint8_t ) ( NODE_ID_RECEIVER_1 & 0xFF );
    aapi_frame.payload[ 2 ] = DEFAULT_PORT;
    strcpy ( &aapi_frame.payload[ 3 ], DEMO_TEXT_MESSAGE );
    if ( NEOMESH915MHZ_OK == neomesh915mhz_send_aapi_frame ( &neomesh915mhz, &aapi_frame ) )
    {
        neomesh915mhz_parse_aapi_rsp ( NEOMESH915MHZ_RSP_ACK );
    }
    #ifndef SINGLE_RECEIVER_MODE
        log_printf( &logger, "\r\n Send message to node: %.4X\r\n", ( uint16_t ) NODE_ID_RECEIVER_2 );
        aapi_frame.cmd = NEOMESH915MHZ_CMD_ACK_SEND;
        aapi_frame.len = 3 + strlen ( DEMO_TEXT_MESSAGE );
        aapi_frame.payload[ 0 ] = ( uint8_t ) ( ( NODE_ID_RECEIVER_2 >> 8 ) & 0xFF );
        aapi_frame.payload[ 1 ] = ( uint8_t ) ( NODE_ID_RECEIVER_2 & 0xFF );
        aapi_frame.payload[ 2 ] = DEFAULT_PORT;
        strcpy ( &aapi_frame.payload[ 3 ], DEMO_TEXT_MESSAGE );
        if ( NEOMESH915MHZ_OK == neomesh915mhz_send_aapi_frame ( &neomesh915mhz, &aapi_frame ) )
        {
            neomesh915mhz_parse_aapi_rsp ( NEOMESH915MHZ_RSP_ACK );
        }
    #endif
#else
   neomesh915mhz_parse_aapi_rsp ( NULL );
#endif
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.NeoMesh915MHz

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---