Main Page

---

nvSRAM 3 click

nvSRAM 3 Click is a compact add-on board that contains the most reliable nonvolatile memory.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Jan 2021.
• Type : I2C type

Software Support

We provide a library for the nvSRAM3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE github account.

Library Description

‍This library contains API for nvSRAM3 Click driver.

Standard key functions :

• nvsram3_cfg_setup Config Object Initialization function.

  void nvsram3_cfg_setup ( nvsram3_cfg_t *cfg );

• nvsram3_init Initialization function.

  NVSRAM3_RETVAL nvsram3_init ( nvsram3_t *ctx, nvsram3_cfg_t *cfg );

• nvsram3_default_cfg Click Default Configuration function.

  void nvsram3_default_cfg ( nvsram3_t *ctx );

Example key functions :

• nvsram3_memory_write This function write a desired number of data bytes starting from the selected memory address by using I2C serial interface.

  err_t nvsram3_memory_write ( nvsram3_t *ctx, uint32_t mem_addr, uint8_t *data_in, uint8_t n_bytes );

• nvsram3_memory_read This function reads a desired number of data bytes starting from the selected memory address by using I2C serial interface.

  err_t nvsram3_memory_read ( nvsram3_t *ctx, uint32_t mem_addr, uint8_t *data_out, uint8_t n_bytes );

• nvsram3_get_rtc_time This function get RTC time data structure.

  void nvsram3_get_rtc_time ( nvsram3_t *ctx, nvsram3_rtc_time_t *rtc_time );

Example Description

‍The demo application shows how to write/read data to/from nvSRAM memory. It also sets RTC date and time, then reads it in an infinite loop and displays results on USB UART each second.

The demo application is composed of two sections :

Application Init

‍Initializes device, reads the device ID, writes desired message to memory and sets RTC date and time.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    nvsram3_cfg_t nvsram3_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
 
    nvsram3_cfg_setup( &nvsram3_cfg );
    NVSRAM3_MAP_MIKROBUS( nvsram3_cfg, MIKROBUS_1 );
    err_t init_flag = nvsram3_init( &nvsram3, &nvsram3_cfg );
    
    if ( init_flag == I2C_MASTER_ERROR ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );
 
        for ( ; ; );
    }
 
    log_printf( &logger, "-----------------------\r\n" );
    log_printf( &logger, "     nvSRAM 3 click    \r\n" );
    log_printf( &logger, "-----------------------\r\n" );
    
    nvsram3_default_cfg ( &nvsram3 );
    Delay_ms ( 100 );
    
    log_printf( &logger, " DEVICE ID: 0x%.8LX\r\n", nvsram3_get_device_id( &nvsram3 ) );
    log_printf( &logger, "-----------------------\r\n" );
    Delay_ms ( 100 );
    
    memory_addr = 0x10000;
    
    log_printf( &logger, "  Write data : %s", demo_data );
    nvsram3_memory_write( &nvsram3, memory_addr, &demo_data[ 0 ], 9 );
    log_printf( &logger, "-----------------------\r\n" );
    Delay_ms ( 1000 );
    
    date.day_of_week = 4;
    date.day = 31;
    date.month = 12;
    date.year = 2020;
    nvsram3_set_rtc_date( &nvsram3, date );
    Delay_ms ( 100 );
    
    time.hours = 23;
    time.min = 59;
    time.sec = 50;
    nvsram3_set_rtc_time( &nvsram3, time );
    Delay_ms ( 100 );
}

Application Task

‍Reads current date and time and then reads the message that we have previusly stored in the memory. All data is being logged on USB UART.

void application_task ( void )
{
    nvsram3_get_rtc_time( &nvsram3, &time );
    nvsram3_get_rtc_date( &nvsram3, &date );
    
    if ( time.sec != new_sec ) 
    {
        log_printf( &logger, "  Date      : %.2d-%.2d-%.4d\r\n", ( uint16_t ) date.day, ( uint16_t ) date.month, ( uint16_t ) date.year );
        log_printf( &logger, "  Time      : %.2d:%.2d:%.2d\r\n", ( uint16_t ) time.hours, ( uint16_t ) time.min, ( uint16_t ) time.sec );
        log_printf( &logger, "- - - - - - - - - - - - - - -\r\n" );
        new_sec = time.sec;
        
        if ( date.year != c_year ) 
        {
            log_printf( &logger, "     Happy New Year    \r\n" );
            c_year = date.year;
        } 
        else 
        {
            nvsram3_memory_read( &nvsram3, memory_addr, &rx_data[ 0 ], 9 );
            log_printf( &logger, "  Read data : %s", rx_data );    
        }
               
        log_printf( &logger, "-----------------------\r\n" );
    } 
    else 
    {
        Delay_ms ( 500 );    
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE github account.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.nvSRAM3

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all Mikroelektronika compilers.

---