Main Page

---

POT 4 click

‍POT 4 Click is a compact add-on board with accurate selectable reference voltage output. This board features the PRS11R-425F-S103B1, a high-quality 11mm rotary 10k potentiometer from Bourns. The PRS11R-425F-S103B1 features a small form factor, offers an push-on momentary switch, a flatted shaft style, and a wide operating temperature range. It comes with a high-resolution 12-bit ADC, detecting even the slightest move while digitizing its position, alongside a rail-to-rail buffering operational amplifier, which provides constant input and output impedance. Besides, the user can process the output signal in analog or digital form.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Oct 2022.
• Type : ADC/I2C type

Software Support

We provide a library for the POT 4 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for POT 4 Click driver.

Standard key functions :

• pot4_cfg_setup Config Object Initialization function.

  void pot4_cfg_setup ( pot4_cfg_t *cfg );

• pot4_init Initialization function.

  err_t pot4_init ( pot4_t *ctx, pot4_cfg_t *cfg );

Example key functions :

• pot4_get_switch_pin This function returns the switch (SW) pin logic state.

  uint8_t pot4_get_switch_pin ( pot4_t *ctx );

• pot4_read_voltage This function reads raw ADC value and converts it to proportional voltage level.

  err_t pot4_read_voltage ( pot4_t *ctx, float *voltage );

• pot4_convert_voltage_to_percents This function converts analog voltage to potentiometer position in percents.

  uint8_t pot4_convert_voltage_to_percents ( pot4_t *ctx, float voltage );

Example Description

‍This example demonstrates the use of POT 4 click board by reading and displaying the potentiometer position.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and logger.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    pot4_cfg_t pot4_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    pot4_cfg_setup( &pot4_cfg );
    POT4_MAP_MIKROBUS( pot4_cfg, MIKROBUS_1 );
    err_t init_flag = pot4_init( &pot4, &pot4_cfg );
    if ( ( ADC_ERROR == init_flag ) || ( I2C_MASTER_ERROR == init_flag ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

‍Reads and displays on the USB UART the potentiometer position in forms of voltage and percents once per second only when the potentiometer switch is active.

void application_task ( void )
{
    if ( !pot4_get_switch_pin ( &pot4 ) )
    {
        float voltage = 0;
        if ( POT4_OK == pot4_read_voltage ( &pot4, &voltage ) ) 
        {
            log_printf( &logger, " AN Voltage : %.3f V\r\n", voltage );
            log_printf( &logger, " Potentiometer : %u %%\r\n\n", 
                        ( uint16_t ) pot4_convert_voltage_to_percents ( &pot4, voltage ) );
            Delay_ms ( 1000 );
        }
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.POT4

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---