Main Page

---

Pressure 23 click

‍Pressure 23 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the MS5849-30BA, an ultra-compact chlorine-resistant absolute pressure sensor from TE Connectivity. The sensor is a small digital altimeter operating from 300 up to 30000mbar, optimized for applications where chlorine is present. The sensor’s stainless-steel housing is filled with gel, which makes it robust and enables it to work in harsh environments.

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Aug 2023.
• Type : I2C/SPI type

Software Support

We provide a library for the Pressure 23 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for Pressure 23 Click driver.

Standard key functions :

• pressure23_cfg_setup Config Object Initialization function.

  void pressure23_cfg_setup ( pressure23_cfg_t *cfg );

• pressure23_init Initialization function.

  err_t pressure23_init ( pressure23_t *ctx, pressure23_cfg_t *cfg );

• pressure23_default_cfg Click Default Configuration function.

  err_t pressure23_default_cfg ( pressure23_t *ctx );

Example key functions :

• pressure23_get_measurement_data Pressure 23 gets the measurement data function.

  err_t pressure23_get_measurement_data ( pressure23_t *ctx, float *pressure, float *temperature );

• pressure23_get_calibration_data Pressure 23 gets the calibration data function.

  err_t pressure23_get_calibration_data ( pressure23_t *ctx );

• pressure23_read_adc Pressure 23 ADC data reading function.

  err_t pressure23_read_adc ( pressure23_t *ctx, uint8_t sel_data, uint32_t *adc_data );

Example Description

‍This example demonstrates the use of Pressure 23 Click board™ by reading and displaying the pressure and temperature measurements.

The demo application is composed of two sections :

Application Init

‍The initialization of I2C or SPI module and log UART. After driver initialization, the app sets the default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    pressure23_cfg_t pressure23_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    pressure23_cfg_setup( &pressure23_cfg );
    PRESSURE23_MAP_MIKROBUS( pressure23_cfg, MIKROBUS_1 );
    err_t init_flag = pressure23_init( &pressure23, &pressure23_cfg );
    if ( ( I2C_MASTER_ERROR == init_flag ) || ( SPI_MASTER_ERROR == init_flag ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( PRESSURE23_ERROR == pressure23_default_cfg ( &pressure23 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
 
    log_info( &logger, " Application Task " );
    log_printf( &logger, " _______________________ \r\n" );
    Delay_ms ( 100 );
}

Application Task

‍The demo application reads and displays the Pressure [mBar] and Temperature [degree Celsius] data. Results are being sent to the UART Terminal, where you can track their changes.

void application_task ( void )
{
    static float temperature, pressure;
    if ( PRESSURE23_OK == pressure23_get_measurement_data( &pressure23, &pressure, &temperature ) )
    {
        log_printf( &logger, " Pressure    : %.2f mBar \r\n", pressure );
        log_printf( &logger, " Temperature : %.2f degC \r\n", temperature );
        log_printf( &logger, " _______________________ \r\n" );
        Delay_ms ( 1000 );
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Pressure23

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---