Main Page

---

Pressure 8 click

‍Pressure 8 Click is an accurate and fully calibrated pressure sensor, equipped with the MPR series integrated piezoresistive silicon pressure sensor IC.

click Product page

---

Click library

• Author : MikroE Team
• Date : nov 2019.
• Type : I2C type

Software Support

We provide a library for the Pressure8 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for Pressure8 Click driver.

Standard key functions :

• pressure8_cfg_setup Config Object Initialization function.

  void pressure8_cfg_setup ( pressure8_cfg_t *cfg ); 

• pressure8_init Initialization function.

  err_t pressure8_init ( pressure8_t *ctx, pressure8_cfg_t *cfg );

Example key functions :

• pressure8_get_pressure Functions for get Pressure data

  float pressure8_get_pressure ( pressure8_t *ctx, uint8_t press_format );

• pressure8_get_device_status Functions for get device status

  uint8_t pressure8_get_device_status ( pressure8_t *ctx );

• pressure8_set_psi_range Functions for set PSI range

  void pressure8_set_psi_range ( pressure8_t *ctx, float psi_min, float psi_max );

Examples Description

‍This application reads pressure data.

The demo application is composed of two sections :

Application Init

‍Initialization device and logger module, reset device and set PSI range.

void application_init ( void )
{
    log_cfg_t log_cfg;
    pressure8_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    //  Click initialization.
    pressure8_cfg_setup( &cfg );
    PRESSURE8_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    pressure8_init( &pressure8, &cfg );
 
    pressure8_device_reset( &pressure8 );
    pressure8_set_psi_range( &pressure8, 0, 25 );
    Delay_ms ( 1000 );
    
    log_info( &logger, " Application Task " );
}

Application Task

‍Reads pressure data in mBar and logs it on the USB UART once per second.

void application_task ( void )
{
    float pressure = 0;
    
    pressure = pressure8_get_pressure( &pressure8, PRESSURE8_DATA_IN_MBAR );
    log_printf( &logger, " Pressure: %.1f mBar\r\n", pressure );
 
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Pressure8

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---