Main Page

---

Proximity 3 click

‍Proximity 3 click is an intelligent proximity and light sensing device, which features the VCNL4200 sensor from Vishay - high sensitivity long distance proximity sensor (PS), ambient light sensor (ALS) and 940 nm IRED, all in one small package.

click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : I2C type

Software Support

We provide a library for the Proximity3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for Proximity3 Click driver.

Standard key functions :

• proximity3_cfg_setup Config Object Initialization function.

  void proximity3_cfg_setup ( proximity3_cfg_t *cfg ); 

• proximity3_init Initialization function.

  err_t proximity3_init ( proximity3_t *ctx, proximity3_cfg_t *cfg );

• proximity3_default_cfg Click Default Configuration function.

  err_t proximity3_default_cfg ( proximity3_t *ctx );

Example key functions :

• proximity3_write_16 This function writes data to the desired register.

  err_t proximity3_write_16 ( proximity3_t *ctx, uint8_t reg_address, uint16_t data_in );

• proximity3_read_als This function gets the data returned by the ambient light sensor.

  uint16_t proximity3_read_als ( proximity3_t *ctx );

• proximity3_read_proximity This function returns the proximity.

  uint16_t proximity3_read_proximity ( proximity3_t *ctx );

Examples Description

‍This application reads the raw ALS and proximity data from Proximity 3 click board.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and performs the click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    proximity3_cfg_t proximity3_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    proximity3_cfg_setup( &proximity3_cfg );
    PROXIMITY3_MAP_MIKROBUS( proximity3_cfg, MIKROBUS_1 );
    if ( PROXIMITY3_ERROR == proximity3_init( &proximity3, &proximity3_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( PROXIMITY3_ERROR == proximity3_default_cfg ( &proximity3 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

‍Reads the raw ALS and proximity data and displays the results on the USB UART every 500ms.

void application_task ( void )
{
    uint16_t proximity = 0;
    uint16_t als = 0;
    
    proximity = proximity3_read_proximity( &proximity3 );
    log_printf( &logger, " Proximity: %u\r\n", proximity );
 
    als = proximity3_read_als( &proximity3 );
    log_printf( &logger, " ALS: %u\r\n", als );
 
    log_printf( &logger, "-----------------\r\n" );
    Delay_ms ( 500 );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Proximity3

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---