Main Page

---

SRAM click

SRAM Click presents additional 1Mbit SRAM memory that can be added to device.

click Product page

---

Click library

• Author : Mihajlo Djordjevic
• Date : Dec 2019.
• Type : SPI type

Software Support

We provide a library for the Sram Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for Sram Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void sram_cfg_setup ( sram_cfg_t *cfg );

  - Initialization function.

  ‍SRAM_RETVAL sram_init ( sram_t *ctx, sram_cfg_t *cfg );

• Click Default Configuration function.

  ‍void sram_default_cfg ( sram_t *ctx );

  Example key functions :

• Function write the 8-bit data to the target 24-bit register address of 23LC1024 chip.

  ‍void sram_write_byte( sram_t *ctx, uint32_t reg_address, uint8_t write_data );

  - Function read the 8-bit data to the target 24-bit register address of 23LC1024 chip.

  ‍uint8_t sram_read_byte( sram_t *ctx, uint32_t reg_address );

  Examples Description

‍ SRAM Click write and read data from 23LC1024 Serial RAM device.

The demo application is composed of two sections :

Application Init

‍ Application Init performs Logger and Click initialization.

void application_init ( void )
{
    log_cfg_t log_cfg;
    sram_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_printf( &logger, "--------------------------\r\n" );
    log_printf( &logger, "     Application  Init\r\n" );
    Delay_ms ( 100 );
 
    //  Click initialization.
 
    sram_cfg_setup( &cfg );
    SRAM_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    sram_init( &sram, &cfg );
    
    log_printf( &logger, "--------------------------\r\n" );
    log_printf( &logger, " ------ SRAM Click  ----- \r\n" );
    log_printf( &logger, "--------------------------\r\n" );
    Delay_ms ( 1000 );
    
    log_printf( &logger, " -- Initialization done --\r\n" );
    log_printf( &logger, "--------------------------\r\n" );
    Delay_ms ( 1000 );
}

Application Task

‍ SRAM Click communicates with register via SPI protocol by write data to and read data from 23LC1024 Serial RAM device. Results are being sent to the UART where you can track their changes. All data logs on USB UART for aproximetly every 5 sec.

void application_task ( void )
{
    log_printf( &logger, " Writing text :\r\n" );
   
    for ( n_cnt = 0; n_cnt < 16; n_cnt++ )
    {
        sram_write_byte( &sram, n_cnt, send_buffer[ n_cnt ] );
        Delay_ms ( 100 );
        
        log_printf( &logger, "%c", send_buffer[ n_cnt ] );
 
        mem_data[ n_cnt ] = sram_read_byte( &sram, n_cnt );
    }
    
    log_printf( &logger, "\r\n" );
    log_printf( &logger, " Read text :\r\n" );
    log_printf( &logger, "%s", &mem_data[ 0 ] );
    log_printf( &logger, "\r\n" );
    log_printf( &logger, "--------------------------\r\n" );
    
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Sram

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---