Main Page

---

STSPIN220 click

‍STSPIN220 click is a stepper motor driver with the PWM current control and selectable microstepping up to 256 microsteps. It is based on the STSPIN220, a low voltage stepper motor driver from STSPIN2 series. It is optimized for battery-powered, low voltage motor driving applications, featuring the lowest standby current available on the market (max 80 nA). The STSPIN220 is a high-efficiency motor driver, featuring low ON resistance MOSFETs as the output stage, in a small 3x3mm QFN package. Its output stage implements the PWM current control with fixed OFF time, along with a full set of protection features. The device can be used with the step motor voltage ranging from 1.8V to 10V, and current up to 1.3A per bridge.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Mar 2024.
• Type : GPIO type

Software Support

We provide a library for the STSPIN220 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for STSPIN220 Click driver.

Standard key functions :

• stspin220_cfg_setup Config Object Initialization function.

  void stspin220_cfg_setup ( stspin220_cfg_t *cfg );

• stspin220_init Initialization function.

  err_t stspin220_init ( stspin220_t *ctx, stspin220_cfg_t *cfg );

• stspin220_default_cfg Click Default Configuration function.

  void stspin220_default_cfg ( stspin220_t *ctx );

Example key functions :

• stspin220_set_direction This function sets the motor direction by setting the DIR pin logic state.

  void stspin220_set_direction ( stspin220_t *ctx, uint8_t dir );

• stspin220_drive_motor This function drives the motor for the specific number of steps at the selected speed.

  void stspin220_drive_motor ( stspin220_t *ctx, uint32_t steps, uint8_t speed );

• stspin220_reset_device This function resets the device by toggling the RST pin.

  void stspin220_reset_device ( stspin220_t *ctx );

Example Description

‍This example demonstrates the use of the STSPIN220 click board by driving the motor in both directions for a desired number of steps.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and performs the click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    stspin220_cfg_t stspin220_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    stspin220_cfg_setup( &stspin220_cfg );
    STSPIN220_MAP_MIKROBUS( stspin220_cfg, MIKROBUS_1 );
    if ( DIGITAL_OUT_UNSUPPORTED_PIN == stspin220_init( &stspin220, &stspin220_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    stspin220_default_cfg ( &stspin220 );
    
    log_info( &logger, " Application Task " );
}

Application Task

‍Drives the motor clockwise for 200 steps and then counter-clockwise with a 2 seconds

delay delay on driving mode change. All data is being logged on the USB UART where you can track the program flow.

void application_task ( void )
{
    log_printf ( &logger, " Move 200 steps clockwise, speed: slow\r\n\n" );
    stspin220_set_direction ( &stspin220, STSPIN220_DIR_CW );
    stspin220_drive_motor ( &stspin220, 200, STSPIN220_SPEED_SLOW );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    log_printf ( &logger, " Move 200 steps counter-clockwise, speed: fast\r\n\n" );
    stspin220_set_direction ( &stspin220, STSPIN220_DIR_CCW );
    stspin220_drive_motor ( &stspin220, 200, STSPIN220_SPEED_FAST );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.STSPIN220

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---