Main Page

---

USB-C Power click

‍USB-C Power Click is a compact add-on board that provides a quick and easy way to supply power without carrying multiple adapters or cables. This board features the TPS25750S, a highly integrated USB Type-C and Power Delivery (PD) controller with integrated power switches optimized for power applications from Texas Instruments. The TPS25750S integrates fully managed power paths (5V/3A with 36mΩ sourcing switch) with robust protection (reverse and inrush current as well as over/under voltage protection) and control for external battery charger IC for a complete USB-C PD solution. Besides web-based GUI and pre-configured firmware, the TPS25750S also has some GPIOs and LED indicators that are user-defined for either status or control information.

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Mar 2023.
• Type : I2C type

Software Support

We provide a library for the USB-C Power Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for USB-C Power Click driver.

Standard key functions :

• usbcpower_cfg_setup Config Object Initialization function.

  void usbcpower_cfg_setup ( usbcpower_cfg_t *cfg );

• usbcpower_init Initialization function.

  err_t usbcpower_init ( usbcpower_t *ctx, usbcpower_cfg_t *cfg );

• usbcpower_default_cfg Click Default Configuration function.

  err_t usbcpower_default_cfg ( usbcpower_t *ctx );

Example key functions :

• usbcpower_get_status USB-C Power gets status function.

  err_t usbcpower_get_status ( usbcpower_t *ctx, usbcpower_status_t *status )

• usbcpower_get_pwr_status USB-C Power gets PWR status function.

  err_t usbcpower_get_pwr_status ( usbcpower_t *ctx, usbcpower_pwr_status_t *pwr_status );

• usbcpower_start_patch_burst_mode USB-C Power starts the patch burst mode function.

  err_t usbcpower_start_patch_burst_mode ( usbcpower_t *ctx, usbcpower_pbms_cfg_t pbms_cfg, uint32_t *response );

Example Description

‍This example demonstrates the use of the USB-C Power Click board™ by configuring the PD controller to attempt to become a Power Source.

The demo application is composed of two sections :

Application Init

‍The initialization of I2C module, log UART, and additional pins. After the driver init, the app executes a default configuration, depending on PD Device Mode, the app performs the patch bundle update tasks for loading a patch bundle in burst mode to the PD controller.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  
    usbcpower_cfg_t usbcpower_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    usbcpower_cfg_setup( &usbcpower_cfg );
    USBCPOWER_MAP_MIKROBUS( usbcpower_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == usbcpower_init( &usbcpower, &usbcpower_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( USBCPOWER_ERROR == usbcpower_default_cfg ( &usbcpower ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    usbcpower_set_patch_mode( &usbcpower, &response );
    if ( USBCPOWER_RSP_OK != response )
    {
        log_error( &logger, " Go to Patch Mode." );
        for ( ; ; );
    }
    
    uint8_t device_mode[ 6 ] = { 0 };
    usbcpower_get_device_mode( &usbcpower, &device_mode );
    log_printf( &logger, " PD Device Mode: %s\r\n", &device_mode[ 1 ] );
    log_printf( &logger, "-----------------------------\r\n" );
    Delay_ms ( 100 );
    
    log_info( &logger, " Application Task " );
    log_printf( &logger, "-----------------------------\r\n" );
    Delay_ms ( 100 );
}

Application Task

‍The application display status information about the PD controller data role and power of the connection. Results are being sent to the UART Terminal, where you can track their changes.

void application_task ( void ) 
{
    if ( USBCPOWER_OK == usbcpower_get_status( &usbcpower, &status ) )
    {
        if ( USBCPOWER_OK == usbcpower_get_pwr_status( &usbcpower, &pwr_status ) )
        {
            usbcpower_display_status( );
            log_printf( &logger, "- - - - - - - - - - - - - - -\r\n" );
            usbcpower_display_pwr_status( );
            log_printf( &logger, "-----------------------------\r\n" );
        }
    }
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

Note

‍For the advanced configuration, use the TPS25750 Application Customization Tool: https://dev.ti.com/gallery/search/TPS25750_Application_Customization_Tool

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.USBCPower

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---