Main Page

---

USB MUX click

‍USB MUX Click is a compact add-on board with a high-bandwidth switch designed for switching and isolating high-speed USB 2.0 signals in systems with limited USB I/Os. This board features the TS3USB30E, a USB 2.0 1:2 multiplexer/demultiplexer switch with a single enable from Texas Instruments.

click Product page

---

Click library

• Author : Stefan Ilic
• Date : May 2023.
• Type : GPIO type

Software Support

We provide a library for the USB MUX Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for USB MUX Click driver.

Standard key functions :

• usbmux_cfg_setup Config Object Initialization function.

  void usbmux_cfg_setup ( usbmux_cfg_t *cfg );

• usbmux_init Initialization function.

  err_t usbmux_init ( usbmux_t *ctx, usbmux_cfg_t *cfg );

• usbmux_default_cfg Click Default Configuration function.

  void usbmux_default_cfg ( usbmux_t *ctx );

Example key functions :

• usbmux_set_oe_pin USB MUX set OE pin output function.

  void usbmux_set_oe_pin ( usbmux_t *ctx, uint8_t pin_state );

• usbmux_enable_output USB MUX enable output function.

  void usbmux_enable_output ( usbmux_t *ctx );

• usbmux_set_output USB MUX select output function.

  void usbmux_set_output ( usbmux_t *ctx, uint8_t out_sel );

Example Description

‍This example demonstrates the use of the USB MUX Click board. This driver provides functions for device configurations and for the selection of the output.

The demo application is composed of two sections :

Application Init

‍Initialization of the log UART, performing default configuration which disables the output.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  
    usbmux_cfg_t usbmux_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    usbmux_cfg_setup( &usbmux_cfg );
    USBMUX_MAP_MIKROBUS( usbmux_cfg, MIKROBUS_1 );
    if ( DIGITAL_OUT_UNSUPPORTED_PIN == usbmux_init( &usbmux, &usbmux_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    usbmux_default_cfg( &usbmux );
    
    log_info( &logger, " Application Task " );
    display_selection( );
}

Application Task

‍Reading user input from UART Terminal and using it for the selection of the output of disabling output of the USB MUX Click board.

void application_task ( void ) 
{
    static char index;
    
    if ( 1 == log_read( &logger, &index, 1 ) ) 
    {
        switch ( index )
        {
            case ( '0' ):
            {
                log_printf( &logger, " Turning output off. \r\n" );
                usbmux_disable_output( &usbmux );
                break;
            }
            case ( '1' ):
            {
                log_printf( &logger, " USB1 Enabled and selected. \r\n" );
                usbmux_set_output( &usbmux, USBMUX_USB1_SELECT );
                usbmux_enable_output( &usbmux );
                break;
            }
            case ( '2' ):
            {
                log_printf( &logger, " USB2 Enabled and selected. \r\n" );
                usbmux_set_output( &usbmux, USBMUX_USB2_SELECT );
                usbmux_enable_output( &usbmux );
                break;
            }
            default:
            {
                display_selection( );
            }
        }
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.USBMUX

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---