dcmotor26.h File Reference

This file contains API for DC Motor 26 Click Driver. More...

#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_spi_master.h"
#include "spi_specifics.h"
#include "drv_i2c_master.h"
#include "drv_analog_in.h"

Go to the source code of this file.

Data Structures
struct	dcmotor26_t
	DC Motor 26 Click context object. More...
struct	dcmotor26_cfg_t
	DC Motor 26 Click configuration object. More...

Macros
#define	DCMOTOR26_REG_STATUS1   0x01
	DC Motor 26 registers list.
#define	DCMOTOR26_REG_STATUS2   0x02
#define	DCMOTOR26_REG_STATUS3   0x03
#define	DCMOTOR26_REG_CONFIG1   0x04
#define	DCMOTOR26_REG_CONFIG2   0x05
#define	DCMOTOR26_REG_CONFIG3   0x06
#define	DCMOTOR26_REG_CONFIG4   0x07
#define	DCMOTOR26_REG_CONFIG5   0x08
#define	DCMOTOR26_REG_CONFIG6   0x09
#define	DCMOTOR26_REG_CONFIG7   0x0A
#define	DCMOTOR26_REG_INPUT   0x00
	DC Motor 26 PCA9538A registers.
#define	DCMOTOR26_REG_OUTPUT   0x01
#define	DCMOTOR26_REG_POLARITY   0x02
#define	DCMOTOR26_REG_CONFIG   0x03
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_NOP_100US   0x000000ul
	DC Motor 26 CONFIG1/2 register settings.
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_NOP_50US   0x002000ul
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_NOP_500US   0x004000ul
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_NOP_MASK   0x006000ul
#define	DCMOTOR26_CONFIG12_DUTY_OFF_LOW_SIDE   0x000000ul
#define	DCMOTOR26_CONFIG12_DUTY_OFF_HIGH_SIDE   0x001000ul
#define	DCMOTOR26_CONFIG12_DUTY_OFF_MASK   0x001000ul
#define	DCMOTOR26_CONFIG12_VBAT_UVC_0US   0x000000ul
#define	DCMOTOR26_CONFIG12_VBAT_UVC_100US   0x000800ul
#define	DCMOTOR26_CONFIG12_VBAT_UVC_MASK   0x000800ul
#define	DCMOTOR26_CONFIG12_CLIMIT_UP_6p5A   0x000000ul
#define	DCMOTOR26_CONFIG12_CLIMIT_UP_4p6A   0x000400ul
#define	DCMOTOR26_CONFIG12_CLIMIT_UP_MASK   0x000400ul
#define	DCMOTOR26_CONFIG12_CLIMIT_LOW_0p25A   0x000000ul
#define	DCMOTOR26_CONFIG12_CLIMIT_LOW_0p5A   0x000200ul
#define	DCMOTOR26_CONFIG12_CLIMIT_LOW_MASK   0x000200ul
#define	DCMOTOR26_CONFIG12_CLIMIT_LOW_0p25A   0x000000ul
#define	DCMOTOR26_CONFIG12_CLIMIT_LOW_0p5A   0x000200ul
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_OP_200mA   0x000000ul
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_OP_100mA   0x000080ul
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_OP_300mA   0x000100ul
#define	DCMOTOR26_CONFIG12_OPEN_LOAD_OP_MASK   0x000180ul
#define	DCMOTOR26_CONFIG12_SR_MODE_NORMAL   0x000000ul
#define	DCMOTOR26_CONFIG12_SR_MODE_SLOW1   0x000010ul
#define	DCMOTOR26_CONFIG12_SR_MODE_SLOW2   0x000020ul
#define	DCMOTOR26_CONFIG12_SR_MODE_SLOW3   0x000030ul
#define	DCMOTOR26_CONFIG12_SR_MODE_SLOW4   0x000040ul
#define	DCMOTOR26_CONFIG12_SR_MODE_FAST2   0x000050ul
#define	DCMOTOR26_CONFIG12_SR_MODE_FAST1   0x000060ul
#define	DCMOTOR26_CONFIG12_SR_MODE_MASK   0x000070ul
#define	DCMOTOR26_CONFIG12_OC_LATCH   0x000000ul
#define	DCMOTOR26_CONFIG12_OC_AUTO   0x000008ul
#define	DCMOTOR26_CONFIG12_OC_MASK   0x000008ul
#define	DCMOTOR26_CONFIG12_OC_LATCH   0x000000ul
#define	DCMOTOR26_CONFIG12_OC_AUTO   0x000008ul
#define	DCMOTOR26_CONFIG12_SPI_DISR_10mS   0x000000ul
#define	DCMOTOR26_CONFIG12_SPI_DISR_100mS   0x000002ul
#define	DCMOTOR26_CONFIG12_SPI_DISR_1S   0x000004ul
#define	DCMOTOR26_CONFIG12_SPI_DISR_DISABLE   0x000006ul
#define	DCMOTOR26_CONFIG12_SPI_DISR_MASK   0x000006ul
#define	DCMOTOR26_CONFIG12_OPMODE_DISR_OFF   0x000000ul
#define	DCMOTOR26_CONFIG12_OPMODE_DISR_CONTINUE   0x000001ul
#define	DCMOTOR26_CONFIG12_OPMODE_DISR_MASK   0x000001ul
#define	DCMOTOR26_CONFIG56_MOTOR_OPMODE_MAX   3u
	DC Motor 26 CONFIG5/6 register settings.
#define	DCMOTOR26_CONFIG56_MOTOR_OPMODE_SHIFT   22ul
#define	DCMOTOR26_CONFIG56_MOTOR_OPMODE_MASK   0xC00000ul
#define	DCMOTOR26_CONFIG56_DRV_FREQ_MAX   2047u
#define	DCMOTOR26_CONFIG56_DRV_FREQ_SHIFT   11ul
#define	DCMOTOR26_CONFIG56_DRV_FREQ_MASK   0x3FF800ul
#define	DCMOTOR26_CONFIG56_DUTY_PERIOD_MAX   2047u
#define	DCMOTOR26_CONFIG56_DUTY_PERIOD_SHIFT   0ul
#define	DCMOTOR26_CONFIG56_DUTY_PERIOD_MASK   0x0007FFul
#define	DCMOTOR26_DIAG1_PIN   0x01
	DC Motor 26 PCA9538A pin mask.
#define	DCMOTOR26_DIAG2_PIN   0x02
#define	DCMOTOR26_EN1_PIN   0x04
#define	DCMOTOR26_EN2_PIN   0x08
#define	DCMOTOR26_CM_SEL_PIN   0x10
#define	DCMOTOR26_SLP_PIN   0x20
#define	DCMOTOR26_DEFAULT_CONFIG   0xE3
	DC Motor 26 PCA9538A pin direction config.
#define	DCMOTOR26_MODE_OUTPUT_OFF   0x00
	DC Motor 26 channel operation mode settings.
#define	DCMOTOR26_MODE_FORWARD   0x01
#define	DCMOTOR26_MODE_REVERSE   0x02
#define	DCMOTOR26_MODE_BRAKE   0x03
#define	DCMOTOR26_PIN_LOW_LEVEL   0
	DC Motor 26 pin logic level setting.
#define	DCMOTOR26_PIN_HIGH_LEVEL   1
#define	DCMOTOR26_VREF_3V3   3.3
	DC Motor 26 ADC setting.
#define	DCMOTOR26_VREF_5V   5.0
#define	DCMOTOR26_NUM_CONVERSIONS   5000
	DC Motor 26 current calculation values.
#define	DCMOTOR26_RSENSE   220.0f
#define	DCMOTOR26_VOLTAGE_TO_CURRENT   0.00238167f
#define	DCMOTOR26_DEVICE_ADDRESS_A1A0_00   0x70
	DC Motor 26 device address setting.
#define	DCMOTOR26_DEVICE_ADDRESS_A1A0_01   0x71
#define	DCMOTOR26_DEVICE_ADDRESS_A1A0_10   0x72
#define	DCMOTOR26_DEVICE_ADDRESS_A1A0_11   0x73
#define	DCMOTOR26_SET_DATA_SAMPLE_EDGE   SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.
#define	DCMOTOR26_SET_DATA_SAMPLE_MIDDLE   SET_SPI_DATA_SAMPLE_MIDDLE
#define	DCMOTOR26_MAP_MIKROBUS(cfg, mikrobus)
	MikroBUS pin mapping.

Enumerations
enum	dcmotor26_return_value_t { DCMOTOR26_OK = 0 , DCMOTOR26_ERROR = -1 }
	DC Motor 26 Click return value data. More...

Functions
void	dcmotor26_cfg_setup (dcmotor26_cfg_t *cfg)
	DC Motor 26 configuration object setup function.
err_t	dcmotor26_init (dcmotor26_t *ctx, dcmotor26_cfg_t *cfg)
	DC Motor 26 initialization function.
err_t	dcmotor26_default_cfg (dcmotor26_t *ctx)
	DC Motor 26 default configuration function.
err_t	dcmotor26_write_register (dcmotor26_t *ctx, uint8_t reg, uint32_t data_in)
	DC Motor 26 write register function.
err_t	dcmotor26_read_register (dcmotor26_t *ctx, uint8_t reg, uint32_t *data_out)
	DC Motor 26 read register function.
err_t	dcmotor26_pca9538a_write_register (dcmotor26_t *ctx, uint8_t reg, uint8_t data_in)
	DC Motor 26 pca9538a write register function.
err_t	dcmotor26_pca9538a_read_register (dcmotor26_t *ctx, uint8_t reg, uint8_t *data_out)
	DC Motor 26 pca9538a read register function.
void	dcmotor26_enter_sleep_mode (dcmotor26_t *ctx)
	DC Motor 26 enter sleep mode function.
void	dcmotor26_wake_up_device (dcmotor26_t *ctx)
	DC Motor 26 wake up device function.
uint8_t	dcmotor26_get_int_pin (dcmotor26_t *ctx)
	DC Motor 26 get int pin function.
void	dcmotor26_set_clk_pin (dcmotor26_t *ctx, uint8_t state)
	DC Motor 26 set clk pin function.
err_t	dcmotor26_set_en1_pin (dcmotor26_t *ctx, uint8_t state)
	DC Motor 26 set en1 pin function.
err_t	dcmotor26_get_en1_pin (dcmotor26_t *ctx, uint8_t *state)
	DC Motor 26 get en1 pin function.
err_t	dcmotor26_set_en2_pin (dcmotor26_t *ctx, uint8_t state)
	DC Motor 26 set en2 pin function.
err_t	dcmotor26_get_en2_pin (dcmotor26_t *ctx, uint8_t *state)
	DC Motor 26 get en2 pin function.
err_t	dcmotor26_set_cm_sel_pin (dcmotor26_t *ctx, uint8_t state)
	DC Motor 26 set cm sel pin function.
err_t	dcmotor26_get_cm_sel_pin (dcmotor26_t *ctx, uint8_t *state)
	DC Motor 26 get cm sel pin function.
err_t	dcmotor26_get_diag1_pin (dcmotor26_t *ctx, uint8_t *state)
	DC Motor 26 get diag1 pin function.
err_t	dcmotor26_get_diag2_pin (dcmotor26_t *ctx, uint8_t *state)
	DC Motor 26 get diag2 pin function.
err_t	dcmotor26_get_sleep_pin (dcmotor26_t *ctx, uint8_t *state)
	DC Motor 26 get sleep pin function.
err_t	dcmotor26_read_an_pin_value (dcmotor26_t *ctx, uint16_t *data_out)
	DC Motor 26 read AN pin value function.
err_t	dcmotor26_read_an_pin_voltage (dcmotor26_t *ctx, float *data_out)
	DC Motor 26 read AN pin voltage level function.
err_t	dcmotor26_get_motor_current (dcmotor26_t *ctx, float *current)
	DC Motor 26 get motor current function.
err_t	dcmotor26_set_ch1_operation_mode (dcmotor26_t *ctx, uint8_t mode)
	DC Motor 26 set ch1 operation mode function.
err_t	dcmotor26_set_ch2_operation_mode (dcmotor26_t *ctx, uint8_t mode)
	DC Motor 26 set ch2 operation mode function.
err_t	dcmotor26_set_ch1_drive_frequency (dcmotor26_t *ctx, uint16_t drv_freq)
	DC Motor 26 set ch1 drive frequency function.
err_t	dcmotor26_set_ch2_drive_frequency (dcmotor26_t *ctx, uint16_t drv_freq)
	DC Motor 26 set ch2 drive frequency function.
err_t	dcmotor26_set_ch1_duty_period (dcmotor26_t *ctx, uint16_t duty_period)
	DC Motor 26 set ch1 duty period function.
err_t	dcmotor26_set_ch2_duty_period (dcmotor26_t *ctx, uint16_t duty_period)
	DC Motor 26 set ch1 duty period function.

Detailed Description

This file contains API for DC Motor 26 Click Driver.

Enumeration Type Documentation

dcmotor26_return_value_t

enum dcmotor26_return_value_t

DC Motor 26 Click return value data.

Predefined enum values for driver return values.

Enumerator
DCMOTOR26_OK
DCMOTOR26_ERROR