Main Page

---

Multi Stepper TB62269 click

‍Multi Stepper Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB62269FTG, PWM method CLOCK-in controlled bipolar stepping motor driver from Toshiba Semiconductor. It supports a PWM constant-current control drive and allows from full-step up to 1/32 steps resolution for less motor noise and smoother control. It has a wide operating voltage range of 10V to 38V with an output current capacity of 1.2A in addition to several built-in error detection circuits.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Feb 2022.
• Type : I2C type

Software Support

We provide a library for the Multi Stepper TB62269 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for Multi Stepper TB62269 Click driver.

Standard key functions :

• multisteppertb62269_cfg_setup Config Object Initialization function.

  void multisteppertb62269_cfg_setup ( multisteppertb62269_cfg_t *cfg );

• multisteppertb62269_init Initialization function.

  err_t multisteppertb62269_init ( multisteppertb62269_t *ctx, multisteppertb62269_cfg_t *cfg );

• multisteppertb62269_default_cfg Click Default Configuration function.

  err_t multisteppertb62269_default_cfg ( multisteppertb62269_t *ctx );

Example key functions :

• multisteppertb62269_set_step_mode This function sets the step mode resolution settings.

  err_t multisteppertb62269_set_step_mode ( multisteppertb62269_t *ctx, uint8_t mode );

• multisteppertb62269_drive_motor This function drives the motor for the specific number of steps at the selected speed.

  void multisteppertb62269_drive_motor ( multisteppertb62269_t *ctx, uint32_t steps, uint8_t speed );

• multisteppertb62269_set_direction This function sets the motor direction by setting the AN pin logic state.

  void multisteppertb62269_set_direction ( multisteppertb62269_t *ctx, uint8_t dir );

Example Description

‍This example demonstrates the use of the Multi Stepper TB62269 click board by driving the motor in both directions for a desired number of steps.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and performs the click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    multisteppertb62269_cfg_t multisteppertb62269_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    multisteppertb62269_cfg_setup( &multisteppertb62269_cfg );
    MULTISTEPPERTB62269_MAP_MIKROBUS( multisteppertb62269_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == multisteppertb62269_init( &multisteppertb62269, &multisteppertb62269_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( MULTISTEPPERTB62269_ERROR == multisteppertb62269_default_cfg ( &multisteppertb62269 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

‍Drives the motor clockwise for 200 steps and then counter-clockiwse for 100 steps with 2 seconds delay before changing the direction.

Each step will be logged on the USB UART where you can track the program flow.

void application_task ( void )
{
    log_printf ( &logger, " Move 200 steps clockwise \r\n\n" );
    multisteppertb62269_set_direction ( &multisteppertb62269, MULTISTEPPERTB62269_DIR_CW );
    multisteppertb62269_drive_motor ( &multisteppertb62269, 200, MULTISTEPPERTB62269_SPEED_FAST );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    log_printf ( &logger, " Move 100 steps counter-clockwise \r\n\n" );
    multisteppertb62269_set_direction ( &multisteppertb62269, MULTISTEPPERTB62269_DIR_CCW );
    multisteppertb62269_drive_motor ( &multisteppertb62269, 100, MULTISTEPPERTB62269_SPEED_FAST );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.MultiStepperTB62269

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---