Here is a list of all macros with links to the files they belong to:

- s -

• SET_SPI_DATA_SAMPLE_EDGE : spi_specifics.h
• SET_SPI_DATA_SAMPLE_MIDDLE : spi_specifics.h
• STEPPER10_DEVICE0_ADDRESS_A2A1_00 : stepper10.h
• STEPPER10_DEVICE0_ADDRESS_A2A1_01 : stepper10.h
• STEPPER10_DEVICE0_ADDRESS_A2A1_10 : stepper10.h
• STEPPER10_DEVICE0_ADDRESS_A2A1_11 : stepper10.h
• STEPPER10_DEVICE1_ADDRESS_A2A1_00 : stepper10.h
• STEPPER10_DEVICE1_ADDRESS_A2A1_01 : stepper10.h
• STEPPER10_DEVICE1_ADDRESS_A2A1_10 : stepper10.h
• STEPPER10_DEVICE1_ADDRESS_A2A1_11 : stepper10.h
• STEPPER10_DIR_CCW : stepper10.h
• STEPPER10_DIR_CW : stepper10.h
• STEPPER10_LO_MOTOR_LOAD_OPEN : stepper10.h
• STEPPER10_LO_NORMAL : stepper10.h
• STEPPER10_LO_OVER_CURRENT : stepper10.h
• STEPPER10_LO_THERMAL_SHUTDOWN : stepper10.h
• STEPPER10_MAP_MIKROBUS : stepper10.h
• STEPPER10_MIXED_DECAY_ADMD : stepper10.h
• STEPPER10_MIXED_DECAY_FAST_37_5 : stepper10.h
• STEPPER10_MIXED_DECAY_FAST_50 : stepper10.h
• STEPPER10_MIXED_DECAY_FAST_ONLY : stepper10.h
• STEPPER10_MODE_1_OVER_128 : stepper10.h
• STEPPER10_MODE_1_OVER_16 : stepper10.h
• STEPPER10_MODE_1_OVER_32 : stepper10.h
• STEPPER10_MODE_1_OVER_64 : stepper10.h
• STEPPER10_MODE_1_OVER_8 : stepper10.h
• STEPPER10_MODE_FULL_STEP : stepper10.h
• STEPPER10_MODE_HALF_STEP : stepper10.h
• STEPPER10_MODE_QUARTER_STEP : stepper10.h
• STEPPER10_PIN0_AGC : stepper10.h
• STEPPER10_PIN0_IF_SEL : stepper10.h
• STEPPER10_PIN0_MDT0 : stepper10.h
• STEPPER10_PIN0_MDT1 : stepper10.h
• STEPPER10_PIN0_MDT_MASK : stepper10.h
• STEPPER10_PIN0_MS0 : stepper10.h
• STEPPER10_PIN0_MS1 : stepper10.h
• STEPPER10_PIN0_MS2 : stepper10.h
• STEPPER10_PIN0_MS_MASK : stepper10.h
• STEPPER10_PIN0_SLEEP : stepper10.h
• STEPPER10_PIN1_CLIM0 : stepper10.h
• STEPPER10_PIN1_EDG_SEL : stepper10.h
• STEPPER10_PIN1_LO0 : stepper10.h
• STEPPER10_PIN1_LO1 : stepper10.h
• STEPPER10_PIN1_LO_MASK : stepper10.h
• STEPPER10_PIN1_MO : stepper10.h
• STEPPER10_PIN1_TORQUE0 : stepper10.h
• STEPPER10_PIN1_TORQUE1 : stepper10.h
• STEPPER10_PIN1_TORQUE2 : stepper10.h
• STEPPER10_PIN1_TORQUE_MASK : stepper10.h
• STEPPER10_PIN_STATE_HIGH : stepper10.h
• STEPPER10_PIN_STATE_LOW : stepper10.h
• STEPPER10_SET_DATA_SAMPLE_EDGE : stepper10.h
• STEPPER10_SET_DATA_SAMPLE_MIDDLE : stepper10.h
• STEPPER10_SPEED_FAST : stepper10.h
• STEPPER10_SPEED_MEDIUM : stepper10.h
• STEPPER10_SPEED_SLOW : stepper10.h
• STEPPER10_SPEED_VERY_FAST : stepper10.h
• STEPPER10_SPEED_VERY_SLOW : stepper10.h
• STEPPER10_TCA9534A_0_DEFAULT_CONFIG : stepper10.h
• STEPPER10_TCA9534A_1_DEFAULT_CONFIG : stepper10.h
• STEPPER10_TCA9534A_REG_CONFIG : stepper10.h
• STEPPER10_TCA9534A_REG_INPUT : stepper10.h
• STEPPER10_TCA9534A_REG_OUTPUT : stepper10.h
• STEPPER10_TCA9534A_REG_POLARITY : stepper10.h
• STEPPER10_TORQUE_10 : stepper10.h
• STEPPER10_TORQUE_100 : stepper10.h
• STEPPER10_TORQUE_25 : stepper10.h
• STEPPER10_TORQUE_40 : stepper10.h
• STEPPER10_TORQUE_50 : stepper10.h
• STEPPER10_TORQUE_60 : stepper10.h
• STEPPER10_TORQUE_70 : stepper10.h
• STEPPER10_TORQUE_85 : stepper10.h