Here is a list of all macros with links to the files they belong to:

- s -

• STEPPER19_ANGLE_360_DEGREES : stepper19.h
• STEPPER19_CTRL_STEP_DIR_GPIO : stepper19.h
• STEPPER19_CTRL_STEP_DIR_PORT_EXP : stepper19.h
• STEPPER19_DECAY_MODE_DYN : stepper19.h
• STEPPER19_DECAY_MODE_F_30 : stepper19.h
• STEPPER19_DECAY_MODE_SLW : stepper19.h
• STEPPER19_DECAY_MODE_XRP : stepper19.h
• STEPPER19_DEVICE_ADDRESS_0 : stepper19.h
• STEPPER19_DEVICE_ADDRESS_1 : stepper19.h
• STEPPER19_DEVICE_ADDRESS_2 : stepper19.h
• STEPPER19_DEVICE_ADDRESS_3 : stepper19.h
• STEPPER19_DIR_CLOCKWISE : stepper19.h
• STEPPER19_DIR_COUNTERCLOCKWISE : stepper19.h
• STEPPER19_FULL_CIRCLE : stepper19.h
• STEPPER19_FULL_STEP : stepper19.h
• STEPPER19_MAP_MIKROBUS : stepper19.h
• STEPPER19_MSTEP_MODE_1_128 : stepper19.h
• STEPPER19_MSTEP_MODE_1_16 : stepper19.h
• STEPPER19_MSTEP_MODE_1_256 : stepper19.h
• STEPPER19_MSTEP_MODE_1_32 : stepper19.h
• STEPPER19_MSTEP_MODE_1_4 : stepper19.h
• STEPPER19_MSTEP_MODE_1_64 : stepper19.h
• STEPPER19_MSTEP_MODE_1_8 : stepper19.h
• STEPPER19_MSTEP_MODE_FULL : stepper19.h
• STEPPER19_MSTEP_MODE_HALF : stepper19.h
• STEPPER19_PIN_DEC0 : stepper19.h
• STEPPER19_PIN_DEC1 : stepper19.h
• STEPPER19_PIN_DIR : stepper19.h
• STEPPER19_PIN_M0 : stepper19.h
• STEPPER19_PIN_M1 : stepper19.h
• STEPPER19_PIN_NONE : stepper19.h
• STEPPER19_PIN_STATE_HIGH : stepper19.h
• STEPPER19_PIN_STATE_LOW : stepper19.h
• STEPPER19_PIN_STP : stepper19.h
• STEPPER19_PIN_TOFF : stepper19.h
• STEPPER19_PORT_EXP_DEFAULT_CFG : stepper19.h
• STEPPER19_REG_CONFIG : stepper19.h
• STEPPER19_REG_IN_PORT : stepper19.h
• STEPPER19_REG_OUT_PORT : stepper19.h
• STEPPER19_REG_POL_INV : stepper19.h
• STEPPER19_RESOLUTION : stepper19.h
• STEPPER19_STEP_DELAY_DEF_100US : stepper19.h
• STEPPER19_STEP_RES_200 : main.c
• STEPPER19_STEP_SPEED_MAX : stepper19.h
• STEPPER19_STEP_SPEED_MIN : stepper19.h
• STEPPER19_TOFF_16US : stepper19.h
• STEPPER19_TOFF_7US : stepper19.h
• STEPPER19_VREF : stepper19.h