Main Page

---

VCP Monitor 3 click

‍VCP Monitor 3 Click is a high precision Voltage, Current and Power measurement Click board™ with an input capable of taking up to 15V. It features the LTC2947, from Analog Devices, a high precision power and energy monitor with an internal sense resistor supporting up to ±30A.

click Product page

---

Click library

• Author : Mikroe Team
• Date : Oct 2021.
• Type : I2C/SPI type

Software Support

We provide a library for the VCPMonitor3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for VCPMonitor3 Click driver.

Standard key functions :

• vcpmonitor3_cfg_setup Config Object Initialization function.

  void vcpmonitor3_cfg_setup ( vcpmonitor3_cfg_t *cfg );

• vcpmonitor3_init Initialization function.

  err_t vcpmonitor3_init ( vcpmonitor3_t *ctx, vcpmonitor3_cfg_t *cfg );

• vcpmonitor3_default_cfg Click Default Configuration function.

  err_t vcpmonitor3_default_cfg ( vcpmonitor3_t *ctx );

Example key functions :

• vcpmonitor3_rd_page_0 Read Data From Page 0 function.

  void vcpmonitor3_rd_page_0 ( vcpmonitor3_t *ctx, uint8_t reg, uint8_t *rd_data, uint8_t n_bytes );

• vcpmonitor3_set_op_mode Set Operation Mode function.

  void vcpmonitor3_set_op_mode ( vcpmonitor3_t *ctx, uint8_t op_mode );

• vcpmonitor3_read_p Read Power in Watts function.

  float vcpmonitor3_read_p ( vcpmonitor3_t *ctx );

Example Description

‍VCP Monitor 3 Click show it's full usage by reading current, voltage, power, die temperature and voltage at DVCC using SPI or I2C communication protocol.

The demo application is composed of two sections :

Application Init

‍Initalizes SPI or I2C driver and sets up the device.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    vcpmonitor3_cfg_t vcpmonitor3_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    vcpmonitor3_cfg_setup( &vcpmonitor3_cfg );
    VCPMONITOR3_MAP_MIKROBUS( vcpmonitor3_cfg, MIKROBUS_1 );
    err_t init_flag  = vcpmonitor3_init( &vcpmonitor3, &vcpmonitor3_cfg );
    if ( ( I2C_MASTER_ERROR == init_flag ) || ( SPI_MASTER_ERROR == init_flag ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( VCPMONITOR3_ERROR == vcpmonitor3_default_cfg ( &vcpmonitor3 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

‍This example shows capabilities of VCP Monitor 3 Click board by reading current, voltage, power, die temperature and voltage at DVCC and displaying the results via USART terminal.

void application_task ( void )
{
    volt_data = vcpmonitor3_read_v( &vcpmonitor3 );
    log_printf( &logger, " Voltage :         %.2f V \r\n", volt_data );
    
    cur_data = vcpmonitor3_read_i( &vcpmonitor3 );
    log_printf( &logger, " Current :         %.2f A \r\n", cur_data );
    
    pow_data = vcpmonitor3_read_p( &vcpmonitor3 );
    log_printf( &logger, " Power :           %.2f W \r\n", pow_data );
   
    die_temp = vcpmonitor3_read_temp( &vcpmonitor3 );
    log_printf( &logger, " Die Temperature : %.2f C \r\n", die_temp );
 
    volt_vcc = vcpmonitor3_read_vcc( &vcpmonitor3 );
    log_printf( &logger, " Voltage at DVCC : %.2f V \r\n", volt_vcc );
 
    log_printf( &logger, " ------------------------------- \r\n" );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.VCPMonitor3

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---