Here is a list of all macros with links to the files they belong to:

- s -

• SET_SPI_DATA_SAMPLE_EDGE : spi_specifics.h
• SET_SPI_DATA_SAMPLE_MIDDLE : spi_specifics.h
• STEPPER6_DAC_DEFAULT_CONFIG : stepper6.h
• STEPPER6_DEVICE_ADDRESS_A1A0_00 : stepper6.h
• STEPPER6_DEVICE_ADDRESS_A1A0_01 : stepper6.h
• STEPPER6_DEVICE_ADDRESS_A1A0_10 : stepper6.h
• STEPPER6_DEVICE_ADDRESS_A1A0_11 : stepper6.h
• STEPPER6_DIR_CCW : stepper6.h
• STEPPER6_DIR_CW : stepper6.h
• STEPPER6_MAP_MIKROBUS : stepper6.h
• STEPPER6_MODE_1_OVER_16 : stepper6.h
• STEPPER6_MODE_1_OVER_8 : stepper6.h
• STEPPER6_MODE_FULL_STEP : stepper6.h
• STEPPER6_MODE_HALF_NON_CIRC_STEP : stepper6.h
• STEPPER6_MODE_HALF_STEP : stepper6.h
• STEPPER6_MODE_QUARTER_STEP : stepper6.h
• STEPPER6_PCA9538A_DEFAULT_CONFIG : stepper6.h
• STEPPER6_PCA9538A_REG_CONFIG : stepper6.h
• STEPPER6_PCA9538A_REG_INPUT : stepper6.h
• STEPPER6_PCA9538A_REG_OUTPUT : stepper6.h
• STEPPER6_PCA9538A_REG_POLARITY : stepper6.h
• STEPPER6_PIN_FAULT : stepper6.h
• STEPPER6_PIN_M0 : stepper6.h
• STEPPER6_PIN_M1 : stepper6.h
• STEPPER6_PIN_SLEEP : stepper6.h
• STEPPER6_PIN_STATE_HIGH : stepper6.h
• STEPPER6_PIN_STATE_LOW : stepper6.h
• STEPPER6_PIN_STATE_OPEN : stepper6.h
• STEPPER6_PIN_TRQ : stepper6.h
• STEPPER6_SET_DATA_SAMPLE_EDGE : stepper6.h
• STEPPER6_SET_DATA_SAMPLE_MIDDLE : stepper6.h
• STEPPER6_SPEED_FAST : stepper6.h
• STEPPER6_SPEED_MEDIUM : stepper6.h
• STEPPER6_SPEED_SLOW : stepper6.h
• STEPPER6_SPEED_VERY_FAST : stepper6.h
• STEPPER6_SPEED_VERY_SLOW : stepper6.h