dm9162__driver_8h_source.html

#ifndef _DM9162_DRIVER_H

#define _DM9162_DRIVER_H


//Dependencies

#include "core/nic.h"


//PHY address

#ifndef DM9162_PHY_ADDR

   #define DM9162_PHY_ADDR 0

#elif (DM9162_PHY_ADDR < 0 || DM9162_PHY_ADDR > 31)

   #error DM9162_PHY_ADDR parameter is not valid

#endif


//DM9162 PHY registers

#define DM9162_BMCR                          0x00

#define DM9162_BMSR                          0x01

#define DM9162_PHYID1                        0x02

#define DM9162_PHYID2                        0x03

#define DM9162_ANAR                          0x04

#define DM9162_ANLPAR                        0x05

#define DM9162_ANER                          0x06

#define DM9162_DSCR                          0x10

#define DM9162_DSCSR                         0x11

#define DM9162_10BTCSR                       0x12

#define DM9162_PWDOR                         0x13

#define DM9162_SCR                           0x14

#define DM9162_MDINTR                        0x15

#define DM9162_RECR                          0x16

#define DM9162_DISCR                         0x17

#define DM9162_RLSR                          0x18

#define DM9162_PSCR                          0x1D


//Basic Mode Control register

#define DM9162_BMCR_RESET                    0x8000

#define DM9162_BMCR_LOOPBACK                 0x4000

#define DM9162_BMCR_SPEED_SEL                0x2000

#define DM9162_BMCR_AN_EN                    0x1000

#define DM9162_BMCR_POWER_DOWN               0x0800

#define DM9162_BMCR_ISOLATE                  0x0400

#define DM9162_BMCR_RESTART_AN               0x0200

#define DM9162_BMCR_DUPLEX_MODE              0x0100

#define DM9162_BMCR_COL_TEST                 0x0080


//Basic Mode Status register

#define DM9162_BMSR_100BT4                   0x8000

#define DM9162_BMSR_100BTX_FD                0x4000

#define DM9162_BMSR_100BTX_HD                0x2000

#define DM9162_BMSR_10BT_FD                  0x1000

#define DM9162_BMSR_10BT_HD                  0x0800

#define DM9162_BMSR_MF_PREAMBLE_SUPPR        0x0040

#define DM9162_BMSR_AN_COMPLETE              0x0020

#define DM9162_BMSR_REMOTE_FAULT             0x0010

#define DM9162_BMSR_AN_CAPABLE               0x0008

#define DM9162_BMSR_LINK_STATUS              0x0004

#define DM9162_BMSR_JABBER_DETECT            0x0002

#define DM9162_BMSR_EXTENDED_CAPABLE         0x0001


//PHY Identifier 1 register

#define DM9162_PHYID1_OUI_MSB                0xFFFF

#define DM9162_PHYID1_OUI_MSB_DEFAULT        0x0181


//PHY Identifier 2 register

#define DM9162_PHYID2_OUI_LSB                0xFC00

#define DM9162_PHYID2_OUI_LSB_DEFAULT        0xB800

#define DM9162_PHYID2_VNDR_MDL               0x03F0

#define DM9162_PHYID2_VNDR_MDL_DEFAULT       0x00A0

#define DM9162_PHYID2_MDL_REV                0x000F


//Auto-Negotiation Advertisement register

#define DM9162_ANAR_NEXT_PAGE                0x8000

#define DM9162_ANAR_ACK                      0x4000

#define DM9162_ANAR_REMOTE_FAULT             0x2000

#define DM9162_ANAR_FCS                      0x0400

#define DM9162_ANAR_100BT4                   0x0200

#define DM9162_ANAR_100BTX_FD                0x0100

#define DM9162_ANAR_100BTX_HD                0x0080

#define DM9162_ANAR_10BT_FD                  0x0040

#define DM9162_ANAR_10BT_HD                  0x0020

#define DM9162_ANAR_SELECTOR                 0x001F

#define DM9162_ANAR_SELECTOR_DEFAULT         0x0001


//Auto-Negotiation Link Partner Ability register

#define DM9162_ANLPAR_NEXT_PAGE              0x8000

#define DM9162_ANLPAR_ACK                    0x4000

#define DM9162_ANLPAR_REMOTE_FAULT           0x2000

#define DM9162_ANLPAR_FCS                    0x0400

#define DM9162_ANLPAR_100BT4                 0x0200

#define DM9162_ANLPAR_100BTX_FD              0x0100

#define DM9162_ANLPAR_100BTX_HD              0x0080

#define DM9162_ANLPAR_10BT_FD                0x0040

#define DM9162_ANLPAR_10BT_HD                0x0020

#define DM9162_ANLPAR_SELECTOR               0x001F

#define DM9162_ANLPAR_SELECTOR_DEFAULT       0x0000


//Auto-Negotiation Expansion register

#define DM9162_ANER_PAR_DETECT_FAULT         0x0010

#define DM9162_ANER_LP_NP_ABLE               0x0008

#define DM9162_ANER_NP_ABLE                  0x0004

#define DM9162_ANER_PAGE_RX                  0x0002

#define DM9162_ANER_LP_AN_ABLE               0x0001


//DAVICOM Specified Configuration register

#define DM9162_DSCR_BP_4B5B                  0x8000

#define DM9162_DSCR_BP_SCR                   0x4000

#define DM9162_DSCR_BP_ALIGN                 0x2000

#define DM9162_DSCR_BP_ADPOK                 0x1000

#define DM9162_DSCR_REPEATER                 0x0800

#define DM9162_DSCR_TX                       0x0400

#define DM9162_DSCR_RMII_EN                  0x0100

#define DM9162_DSCR_F_LINK_100               0x0080

#define DM9162_DSCR_SPLED_CTL                0x0040

#define DM9162_DSCR_COLLED_CTL               0x0020

#define DM9162_DSCR_RPDCTR_EN                0x0010

#define DM9162_DSCR_SMRST                    0x0008

#define DM9162_DSCR_MFPSC                    0x0004

#define DM9162_DSCR_SLEEP                    0x0002

#define DM9162_DSCR_RLOUT                    0x0001


//DAVICOM Specified Configuration and Status register

#define DM9162_DSCSR_100FDX                  0x8000

#define DM9162_DSCSR_100HDX                  0x4000

#define DM9162_DSCSR_10FDX                   0x2000

#define DM9162_DSCSR_10HDX                   0x1000

#define DM9162_DSCSR_PHYADR                  0x01F0

#define DM9162_DSCSR_ANMB                    0x000F

#define DM9162_DSCSR_ANMB_IDLE               0x0000

#define DM9162_DSCSR_ANMB_ABILITY_MATCH      0x0001

#define DM9162_DSCSR_ANMB_ACK_MATCH          0x0002

#define DM9162_DSCSR_ANMB_ACK_MATCH_FAIL     0x0003

#define DM9162_DSCSR_ANMB_CONSIST_MATCH      0x0004

#define DM9162_DSCSR_ANMB_CONSIST_MATCH_FAIL 0x0005

#define DM9162_DSCSR_ANMB_LINK_READY         0x0006

#define DM9162_DSCSR_ANMB_LINK_READY_FAIL    0x0007

#define DM9162_DSCSR_ANMB_AN_COMPLETE        0x0008


//10BASE-T Configuration/Status register

#define DM9162_10BTCSR_LP_EN                 0x4000

#define DM9162_10BTCSR_HBE                   0x2000

#define DM9162_10BTCSR_SQUELCH               0x1000

#define DM9162_10BTCSR_JABEN                 0x0800

#define DM9162_10BTCSR_10BT_SER              0x0400

#define DM9162_10BTCSR_POLR                  0x0001


//Power-Down Control register

#define DM9162_PWDOR_PD_10DRV                0x0100

#define DM9162_PWDOR_PD_100DL                0x0080

#define DM9162_PWDOR_PD_CHIP                 0x0040

#define DM9162_PWDOR_PD_COM                  0x0020

#define DM9162_PWDOR_PD_AEQ                  0x0010

#define DM9162_PWDOR_PD_DRV                  0x0008

#define DM9162_PWDOR_PD_EDI                  0x0004

#define DM9162_PWDOR_PD_EDO                  0x0002

#define DM9162_PWDOR_PD_10                   0x0001


//DAVICOM Specified Configuration register

#define DM9162_SCR_TSTSE1                    0x8000

#define DM9162_SCR_TSTSE2                    0x4000

#define DM9162_SCR_STSEL3                    0x1000

#define DM9162_SCR_PREAMBLEX                 0x0800

#define DM9162_SCR_TX10M_PWR                 0x0400

#define DM9162_SCR_NWAY_PWR                  0x0200

#define DM9162_SCR_MDIX_CNTL                 0x0080

#define DM9162_SCR_AUTONEG_DPBK              0x0040

#define DM9162_SCR_MDIX_FIX_VALUE            0x0020

#define DM9162_SCR_MDIX_DOWN                 0x0010

#define DM9162_SCR_MONSEL1                   0x0008

#define DM9162_SCR_MONSEL0                   0x0004

#define DM9162_SCR_RMII_VER                  0x0002

#define DM9162_SCR_PD_VALUE                  0x0001


//DAVICOM Specified Interrupt register

#define DM9162_MDINTR_INTR_PEND              0x8000

#define DM9162_MDINTR_FDX_MASK               0x0800

#define DM9162_MDINTR_SPD_MASK               0x0400

#define DM9162_MDINTR_LINK_MASK              0x0200

#define DM9162_MDINTR_INTR_MASK              0x0100

#define DM9162_MDINTR_FDX_CHANGE             0x0010

#define DM9162_MDINTR_SPD_CHANGE             0x0008

#define DM9162_MDINTR_LINK_CHANGE            0x0004

#define DM9162_MDINTR_INTR_STATUS            0x0001


//DAVICOM Specified Receive Error Counter register

#define DM9162_RECR_RCV_ERR_CNT              0xFFFF


//DAVICOM Specified Disconnect Counter register

#define DM9162_DISCR_DISCONNECT_COUNT        0x00FF


//DAVICOM Hardware Reset Latch State register

#define DM9162_RLSR_LH_LEDMODE               0x8000

#define DM9162_RLSR_LH_MDINTR                0x4000

#define DM9162_RLSR_LH_CSTS                  0x2000

#define DM9162_RLSR_LH_ISO                   0x1000

#define DM9162_RLSR_LH_RMII                  0x0800

#define DM9162_RLSR_LH_TP10SER               0x0400

#define DM9162_RLSR_LH_REPTR                 0x0200

#define DM9162_RLSR_LH_TSTMOD                0x0100

#define DM9162_RLSR_LH_OP                    0x00E0

#define DM9162_RLSR_LH_PH                    0x001F


//Power Saving Control register

#define DM9162_PSCR_PREAMBLEX                0x0800

#define DM9162_PSCR_TX_PWR                   0x0200


//C++ guard

#ifdef __cplusplus

extern "C" {

#endif


//DM9162 Ethernet PHY driver

extern const PhyDriver dm9162PhyDriver;


//DM9162 related functions

error_t dm9162Init(NetInterface *interface);

void dm9162InitHook(NetInterface *interface);


void dm9162Tick(NetInterface *interface);


void dm9162EnableIrq(NetInterface *interface);

void dm9162DisableIrq(NetInterface *interface);


void dm9162EventHandler(NetInterface *interface);


void dm9162WritePhyReg(NetInterface *interface, uint8_t address,

   uint16_t data);


uint16_t dm9162ReadPhyReg(NetInterface *interface, uint8_t address);


void dm9162DumpPhyReg(NetInterface *interface);


//C++ guard

#ifdef __cplusplus

}

#endif


#endif

error_t
error_t
Error codes.
Definition error.h:43

nic.h
Network interface controller abstraction layer.

PhyDriver
Ethernet PHY driver.
Definition nic.h:308