mikroSDK Reference Manual
Here is a list of all documented functions with links to the documentation:
- s -
SCB_CleanDCache() :
core_cm7.h
SCB_CleanDCache_by_Addr() :
core_cm7.h
SCB_CleanInvalidateDCache() :
core_cm7.h
SCB_CleanInvalidateDCache_by_Addr() :
core_cm7.h
SCB_DisableDCache() :
core_cm7.h
SCB_DisableICache() :
core_cm7.h
SCB_EnableDCache() :
core_cm7.h
SCB_EnableICache() :
core_cm7.h
SCB_GetFPUType() :
core_cm3.h
SCB_InvalidateDCache() :
core_cm7.h
SCB_InvalidateDCache_by_Addr() :
core_cm7.h
SCB_InvalidateICache() :
core_cm7.h
SCB_InvalidateICache_by_Addr() :
core_cm7.h
sdspi_physical_drive_init() :
sdspi_physical_drive.h
spi_master_close() :
drv_spi_master.h
spi_master_configure_default() :
drv_spi_master.h
spi_master_deselect_device() :
drv_spi_master.h
spi_master_open() :
drv_spi_master.h
spi_master_read() :
drv_spi_master.h
spi_master_select_device() :
drv_spi_master.h
spi_master_set_chip_select_polarity() :
drv_spi_master.h
spi_master_set_default_write_data() :
drv_spi_master.h
spi_master_set_mode() :
drv_spi_master.h
spi_master_set_speed() :
drv_spi_master.h
spi_master_write() :
drv_spi_master.h
spi_master_write_then_read() :
drv_spi_master.h
ssd1963_get_display_height() :
ssd1963.h
ssd1963_get_display_width() :
ssd1963.h
ssd1963_init() :
ssd1963.h
ssd1963_write_command() :
ssd1963.h
ssd1963_write_param() :
ssd1963.h
stm32f1xxEthInitGpio() :
hw_eth.h
,
stm32f1xx_eth_driver.h
stm32f2xxEthInitGpio() :
hw_eth.h
,
stm32f2xx_eth_driver.h
stm32f4xxEthInitGpio() :
hw_eth.h
,
stm32f4xx_eth_driver.h
stm32f7xxEthInitGpio() :
hw_eth.h
,
stm32f7xx_eth_driver.h
stmpe811_calibrate() :
stmpe811.h
stmpe811_cfg_setup() :
stmpe811.h
stmpe811_default_cfg() :
stmpe811.h
stmpe811_generic_read() :
stmpe811.h
stmpe811_generic_read_byte() :
stmpe811.h
stmpe811_generic_write() :
stmpe811.h
stmpe811_generic_write_byte() :
stmpe811.h
stmpe811_gesture() :
stmpe811.h
stmpe811_get_calibration_data() :
stmpe811.h
stmpe811_init() :
stmpe811.h
stmpe811_press_coordinates() :
stmpe811.h
stmpe811_press_detect() :
stmpe811.h
stmpe811_process() :
stmpe811.h
stmpe811_read_xyz() :
stmpe811.h
stmpe811_read_xyz_raw() :
stmpe811.h
stmpe811_set_calibration_data() :
stmpe811.h