rtl8211e__driver_8h_source.html

#ifndef _RTL8211E_DRIVER_H

#define _RTL8211E_DRIVER_H


//Dependencies

#include "core/nic.h"


//PHY address

#ifndef RTL8211E_PHY_ADDR

   #define RTL8211E_PHY_ADDR 1

#elif (RTL8211E_PHY_ADDR < 0 || RTL8211E_PHY_ADDR > 31)

   #error RTL8211E_PHY_ADDR parameter is not valid

#endif


//RTL8211E PHY registers

#define RTL8211E_BMCR                         0x00

#define RTL8211E_BMSR                         0x01

#define RTL8211E_PHYID1                       0x02

#define RTL8211E_PHYID2                       0x03

#define RTL8211E_ANAR                         0x04

#define RTL8211E_ANLPAR                       0x05

#define RTL8211E_ANER                         0x06

#define RTL8211E_ANNPTR                       0x07

#define RTL8211E_ANNPRR                       0x08

#define RTL8211E_GBCR                         0x09

#define RTL8211E_GBSR                         0x0A

#define RTL8211E_MMDACR                       0x0D

#define RTL8211E_MMDAADR                      0x0E

#define RTL8211E_GBESR                        0x0F

#define RTL8211E_PHYCR                        0x10

#define RTL8211E_PHYSR                        0x11

#define RTL8211E_INER                         0x12

#define RTL8211E_INSR                         0x13

#define RTL8211E_RXERC                        0x18

#define RTL8211E_LDPSR                        0x1B

#define RTL8211E_EPAGSR                       0x1E

#define RTL8211E_PAGSR                        0x1F


//Basic Mode Control register

#define RTL8211E_BMCR_RESET                   0x8000

#define RTL8211E_BMCR_LOOPBACK                0x4000

#define RTL8211E_BMCR_SPEED_SEL_LSB           0x2000

#define RTL8211E_BMCR_AN_EN                   0x1000

#define RTL8211E_BMCR_POWER_DOWN              0x0800

#define RTL8211E_BMCR_ISOLATE                 0x0400

#define RTL8211E_BMCR_RESTART_AN              0x0200

#define RTL8211E_BMCR_DUPLEX_MODE             0x0100

#define RTL8211E_BMCR_COL_TEST                0x0080

#define RTL8211E_BMCR_SPEED_SEL_MSB           0x0040


//Basic Mode Status register

#define RTL8211E_BMSR_100BT4                  0x8000

#define RTL8211E_BMSR_100BTX_FD               0x4000

#define RTL8211E_BMSR_100BTX_HD               0x2000

#define RTL8211E_BMSR_10BT_FD                 0x1000

#define RTL8211E_BMSR_10BT_HD                 0x0800

#define RTL8211E_BMSR_100BT2_FD               0x0400

#define RTL8211E_BMSR_100BT2_HD               0x0200

#define RTL8211E_BMSR_EXTENDED_STATUS         0x0100

#define RTL8211E_BMSR_PREAMBLE_SUPPR          0x0040

#define RTL8211E_BMSR_AN_COMPLETE             0x0020

#define RTL8211E_BMSR_REMOTE_FAULT            0x0010

#define RTL8211E_BMSR_AN_CAPABLE              0x0008

#define RTL8211E_BMSR_LINK_STATUS             0x0004

#define RTL8211E_BMSR_JABBER_DETECT           0x0002

#define RTL8211E_BMSR_EXTENDED_CAPABLE        0x0001


//PHY Identifier 1 register

#define RTL8211E_PHYID1_OUI_MSB               0xFFFF

#define RTL8211E_PHYID1_OUI_MSB_DEFAULT       0x001C


//PHY Identifier 2 register

#define RTL8211E_PHYID2_OUI_LSB               0xFC00

#define RTL8211E_PHYID2_OUI_LSB_DEFAULT       0xC800

#define RTL8211E_PHYID2_MODEL_NUM             0x03F0

#define RTL8211E_PHYID2_MODEL_NUM_DEFAULT     0x0110

#define RTL8211E_PHYID2_REVISION_NUM          0x000F

#define RTL8211E_PHYID2_REVISION_NUM_DEFAULT  0x0005


//Auto-Negotiation Advertisement register

#define RTL8211E_ANAR_NEXT_PAGE               0x8000

#define RTL8211E_ANAR_REMOTE_FAULT            0x2000

#define RTL8211E_ANAR_ASYM_PAUSE              0x0800

#define RTL8211E_ANAR_PAUSE                   0x0400

#define RTL8211E_ANAR_100BT4                  0x0200

#define RTL8211E_ANAR_100BTX_FD               0x0100

#define RTL8211E_ANAR_100BTX_HD               0x0080

#define RTL8211E_ANAR_10BT_FD                 0x0040

#define RTL8211E_ANAR_10BT_HD                 0x0020

#define RTL8211E_ANAR_SELECTOR                0x001F

#define RTL8211E_ANAR_SELECTOR_DEFAULT        0x0001


//Auto-Negotiation Link Partner Ability register

#define RTL8211E_ANLPAR_NEXT_PAGE             0x8000

#define RTL8211E_ANLPAR_ACK                   0x4000

#define RTL8211E_ANLPAR_REMOTE_FAULT          0x2000

#define RTL8211E_ANLPAR_ASYM_PAUSE            0x0800

#define RTL8211E_ANLPAR_PAUSE                 0x0400

#define RTL8211E_ANLPAR_100BT4                0x0200

#define RTL8211E_ANLPAR_100BTX_FD             0x0100

#define RTL8211E_ANLPAR_100BTX_HD             0x0080

#define RTL8211E_ANLPAR_10BT_FD               0x0040

#define RTL8211E_ANLPAR_10BT_HD               0x0020

#define RTL8211E_ANLPAR_SELECTOR              0x001F

#define RTL8211E_ANLPAR_SELECTOR_DEFAULT      0x0001


//Auto-Negotiation Expansion register

#define RTL8211E_ANER_PAR_DETECT_FAULT        0x0010

#define RTL8211E_ANER_LP_NEXT_PAGE_ABLE       0x0008

#define RTL8211E_ANER_NEXT_PAGE_ABLE          0x0004

#define RTL8211E_ANER_PAGE_RECEIVED           0x0002

#define RTL8211E_ANER_LP_AN_ABLE              0x0001


//Auto-Negotiation Next Page Transmit register

#define RTL8211E_ANNPTR_NEXT_PAGE             0x8000

#define RTL8211E_ANNPTR_MSG_PAGE              0x2000

#define RTL8211E_ANNPTR_ACK2                  0x1000

#define RTL8211E_ANNPTR_TOGGLE                0x0800

#define RTL8211E_ANNPTR_MESSAGE               0x07FF


//Auto-Negotiation Next Page Receive register

#define RTL8211E_ANNPRR_NEXT_PAGE             0x8000

#define RTL8211E_ANNPRR_ACK                   0x4000

#define RTL8211E_ANNPRR_MSG_PAGE              0x2000

#define RTL8211E_ANNPRR_ACK2                  0x1000

#define RTL8211E_ANNPRR_TOGGLE                0x0800

#define RTL8211E_ANNPRR_MESSAGE               0x07FF


//1000Base-T Control register

#define RTL8211E_GBCR_TEST_MODE               0xE000

#define RTL8211E_GBCR_MS_MAN_CONF_EN          0x1000

#define RTL8211E_GBCR_MS_MAN_CONF_VAL         0x0800

#define RTL8211E_GBCR_PORT_TYPE               0x0400

#define RTL8211E_GBCR_1000BT_FD               0x0200


//1000Base-T Status register

#define RTL8211E_GBSR_MS_CONF_FAULT           0x8000

#define RTL8211E_GBSR_MS_CONF_RES             0x4000

#define RTL8211E_GBSR_LOCAL_RECEIVER_STATUS   0x2000

#define RTL8211E_GBSR_REMOTE_RECEIVER_STATUS  0x1000

#define RTL8211E_GBSR_LP_1000BT_FD            0x0800

#define RTL8211E_GBSR_LP_1000BT_HD            0x0400

#define RTL8211E_GBSR_IDLE_ERR_COUNT          0x00FF


//MMD Access Control register

#define RTL8211E_MMDACR_FUNC                  0xC000

#define RTL8211E_MMDACR_FUNC_ADDR             0x0000

#define RTL8211E_MMDACR_FUNC_DATA_NO_POST_INC 0x4000

#define RTL8211E_MMDACR_FUNC_DATA_POST_INC_RW 0x8000

#define RTL8211E_MMDACR_FUNC_DATA_POST_INC_W  0xC000

#define RTL8211E_MMDACR_DEVAD                 0x001F


//1000Base-T Extended Status register

#define RTL8211E_GBESR_1000BX_FD              0x8000

#define RTL8211E_GBESR_1000BX_HD              0x4000

#define RTL8211E_GBESR_1000BT_FD              0x2000

#define RTL8211E_GBESR_1000BT_HD              0x1000


//PHY Specific Control register

#define RTL8211E_PHYCR_RXC_DIS                0x8000

#define RTL8211E_PHYCR_FPR_FAIL_SEL           0x7000

#define RTL8211E_PHYCR_ASSERT_CRS_ON_TX       0x0800

#define RTL8211E_PHYCR_FORCE_LINK_GOOD        0x0400

#define RTL8211E_PHYCR_CROSSOVER_EN           0x0040

#define RTL8211E_PHYCR_MDI_MODE               0x0020

#define RTL8211E_PHYCR_CLK125_DIS             0x0010

#define RTL8211E_PHYCR_JABBER_DIS             0x0001


//PHY Specific Status register

#define RTL8211E_PHYSR_SPEED                  0xC000

#define RTL8211E_PHYSR_SPEED_10MBPS           0x0000

#define RTL8211E_PHYSR_SPEED_100MBPS          0x4000

#define RTL8211E_PHYSR_SPEED_1000MBPS         0x8000

#define RTL8211E_PHYSR_DUPLEX                 0x2000

#define RTL8211E_PHYSR_PAGE_RECEIVED          0x1000

#define RTL8211E_PHYSR_SPEED_DUPLEX_RESOLVED  0x0800

#define RTL8211E_PHYSR_LINK                   0x0400

#define RTL8211E_PHYSR_MDI_CROSSOVER_STATUS   0x0040

#define RTL8211E_PHYSR_PRE_LINKOK             0x0002

#define RTL8211E_PHYSR_JABBER                 0x0001


//Interrupt Enable register

#define RTL8211E_INER_AN_ERROR                0x8000

#define RTL8211E_INER_PAGE_RECEIVED           0x1000

#define RTL8211E_INER_AN_COMPLETE             0x0800

#define RTL8211E_INER_LINK_STATUS             0x0400

#define RTL8211E_INER_SYMBOL_ERROR            0x0200

#define RTL8211E_INER_FALSE_CARRIER           0x0100

#define RTL8211E_INER_JABBER                  0x0001


//Interrupt Status register

#define RTL8211E_INSR_AN_ERROR                0x8000

#define RTL8211E_INSR_PAGE_RECEIVED           0x1000

#define RTL8211E_INSR_AN_COMPLETE             0x0800

#define RTL8211E_INSR_LINK_STATUS             0x0400

#define RTL8211E_INSR_SYMBOL_ERROR            0x0200

#define RTL8211E_INSR_FALSE_CARRIER           0x0100

#define RTL8211E_INSR_JABBER                  0x0001


//Link Down Power Saving register

#define RTL8211E_LDPSR_POWER_SAVE_MODE        0x0001


//Extension Page Select register

#define RTL8211E_EPAGSR_EXT_PAGE_SEL          0x00FF


//Page Select register

#define RTL8211E_PAGSR_PAGE_SEL               0x0007


//C++ guard

#ifdef __cplusplus

extern "C" {

#endif


//RTL8211E Ethernet PHY driver

extern const PhyDriver rtl8211ePhyDriver;


//RTL8211E related functions

error_t rtl8211eInit(NetInterface *interface);

void rtl8211eInitHook(NetInterface *interface);


void rtl8211eTick(NetInterface *interface);


void rtl8211eEnableIrq(NetInterface *interface);

void rtl8211eDisableIrq(NetInterface *interface);


void rtl8211eEventHandler(NetInterface *interface);


void rtl8211eWritePhyReg(NetInterface *interface, uint8_t address,

   uint16_t data);


uint16_t rtl8211eReadPhyReg(NetInterface *interface, uint8_t address);


void rtl8211eDumpPhyReg(NetInterface *interface);


void rtl8211eWriteMmdReg(NetInterface *interface, uint8_t devAddr,

   uint16_t regAddr, uint16_t data);


uint16_t rtl8211eReadMmdReg(NetInterface *interface, uint8_t devAddr,

   uint16_t regAddr);


//C++ guard

#ifdef __cplusplus

}

#endif


#endif

error_t
error_t
Error codes.
Definition error.h:43

nic.h
Network interface controller abstraction layer.

PhyDriver
Ethernet PHY driver.
Definition nic.h:308