rtl8211f__driver_8h_source.html

#ifndef _RTL8211F_DRIVER_H

#define _RTL8211F_DRIVER_H


//Dependencies

#include "core/nic.h"


//PHY address

#ifndef RTL8211F_PHY_ADDR

   #define RTL8211F_PHY_ADDR 1

#elif (RTL8211F_PHY_ADDR < 0 || RTL8211F_PHY_ADDR > 31)

   #error RTL8211F_PHY_ADDR parameter is not valid

#endif


//RTL8211F PHY registers

#define RTL8211F_BMCR                          0x00

#define RTL8211F_BMSR                          0x01

#define RTL8211F_PHYID1                        0x02

#define RTL8211F_PHYID2                        0x03

#define RTL8211F_ANAR                          0x04

#define RTL8211F_ANLPAR                        0x05

#define RTL8211F_ANER                          0x06

#define RTL8211F_ANNPTR                        0x07

#define RTL8211F_ANNPRR                        0x08

#define RTL8211F_GBCR                          0x09

#define RTL8211F_GBSR                          0x0A

#define RTL8211F_MMDACR                        0x0D

#define RTL8211F_MMDAADR                       0x0E

#define RTL8211F_GBESR                         0x0F

#define RTL8211F_INER                          0x12

#define RTL8211F_PHYCR1                        0x18

#define RTL8211F_PHYCR2                        0x19

#define RTL8211F_PHYSR                         0x1A

#define RTL8211F_INSR                          0x1D

#define RTL8211F_PAGSR                         0x1F


//RTL8211F MMD registers

#define RTL8211F_PC1R                          0x03, 0x00

#define RTL8211F_PS1R                          0x03, 0x01

#define RTL8211F_EEECR                         0x03, 0x14

#define RTL8211F_EEEWER                        0x03, 0x16

#define RTL8211F_EEEAR                         0x07, 0x3C

#define RTL8211F_EEELPAR                       0x07, 0x3D


//Basic Mode Control register

#define RTL8211F_BMCR_RESET                    0x8000

#define RTL8211F_BMCR_LOOPBACK                 0x4000

#define RTL8211F_BMCR_SPEED_SEL_LSB            0x2000

#define RTL8211F_BMCR_AN_EN                    0x1000

#define RTL8211F_BMCR_POWER_DOWN               0x0800

#define RTL8211F_BMCR_ISOLATE                  0x0400

#define RTL8211F_BMCR_RESTART_AN               0x0200

#define RTL8211F_BMCR_DUPLEX_MODE              0x0100

#define RTL8211F_BMCR_COL_TEST                 0x0080

#define RTL8211F_BMCR_SPEED_SEL_MSB            0x0040

#define RTL8211F_BMCR_UNI_DIR_EN               0x0020


//Basic Mode Status register

#define RTL8211F_BMSR_100BT4                   0x8000

#define RTL8211F_BMSR_100BTX_FD                0x4000

#define RTL8211F_BMSR_100BTX_HD                0x2000

#define RTL8211F_BMSR_10BT_FD                  0x1000

#define RTL8211F_BMSR_10BT_HD                  0x0800

#define RTL8211F_BMSR_100BT2_FD                0x0400

#define RTL8211F_BMSR_100BT2_HD                0x0200

#define RTL8211F_BMSR_EXTENDED_STATUS          0x0100

#define RTL8211F_BMSR_UNI_DIR_CAPABLE          0x0080

#define RTL8211F_BMSR_PREAMBLE_SUPPR           0x0040

#define RTL8211F_BMSR_AN_COMPLETE              0x0020

#define RTL8211F_BMSR_REMOTE_FAULT             0x0010

#define RTL8211F_BMSR_AN_CAPABLE               0x0008

#define RTL8211F_BMSR_LINK_STATUS              0x0004

#define RTL8211F_BMSR_JABBER_DETECT            0x0002

#define RTL8211F_BMSR_EXTENDED_CAPABLE         0x0001


//PHY Identifier 1 register

#define RTL8211F_PHYID1_OUI_MSB                0xFFFF

#define RTL8211F_PHYID1_OUI_MSB_DEFAULT        0x001C


//PHY Identifier 2 register

#define RTL8211F_PHYID2_OUI_LSB                0xFC00

#define RTL8211F_PHYID2_OUI_LSB_DEFAULT        0xC800

#define RTL8211F_PHYID2_MODEL_NUM              0x03F0

#define RTL8211F_PHYID2_MODEL_NUM_DEFAULT      0x0110

#define RTL8211F_PHYID2_REVISION_NUM           0x000F

#define RTL8211F_PHYID2_REVISION_NUM_DEFAULT   0x0006


//Auto-Negotiation Advertisement register

#define RTL8211F_ANAR_NEXT_PAGE                0x8000

#define RTL8211F_ANAR_REMOTE_FAULT             0x2000

#define RTL8211F_ANAR_ASYM_PAUSE               0x0800

#define RTL8211F_ANAR_PAUSE                    0x0400

#define RTL8211F_ANAR_100BT4                   0x0200

#define RTL8211F_ANAR_100BTX_FD                0x0100

#define RTL8211F_ANAR_100BTX_HD                0x0080

#define RTL8211F_ANAR_10BT_FD                  0x0040

#define RTL8211F_ANAR_10BT_HD                  0x0020

#define RTL8211F_ANAR_SELECTOR                 0x001F

#define RTL8211F_ANAR_SELECTOR_DEFAULT         0x0001


//Auto-Negotiation Link Partner Ability register

#define RTL8211F_ANLPAR_NEXT_PAGE              0x8000

#define RTL8211F_ANLPAR_ACK                    0x4000

#define RTL8211F_ANLPAR_REMOTE_FAULT           0x2000

#define RTL8211F_ANLPAR_ASYM_PAUSE             0x0800

#define RTL8211F_ANLPAR_PAUSE                  0x0400

#define RTL8211F_ANLPAR_100BT4                 0x0200

#define RTL8211F_ANLPAR_100BTX_FD              0x0100

#define RTL8211F_ANLPAR_100BTX_HD              0x0080

#define RTL8211F_ANLPAR_10BT_FD                0x0040

#define RTL8211F_ANLPAR_10BT_HD                0x0020

#define RTL8211F_ANLPAR_SELECTOR               0x001F

#define RTL8211F_ANLPAR_SELECTOR_DEFAULT       0x0001


//Auto-Negotiation Expansion register

#define RTL8211F_ANER_RX_NP_LOCATION_ABLE      0x0040

#define RTL8211F_ANER_RX_NP_LOCATION           0x0020

#define RTL8211F_ANER_PAR_DETECT_FAULT         0x0010

#define RTL8211F_ANER_LP_NEXT_PAGE_ABLE        0x0008

#define RTL8211F_ANER_NEXT_PAGE_ABLE           0x0004

#define RTL8211F_ANER_PAGE_RECEIVED            0x0002

#define RTL8211F_ANER_LP_AN_ABLE               0x0001


//Auto-Negotiation Next Page Transmit register

#define RTL8211F_ANNPTR_NEXT_PAGE              0x8000

#define RTL8211F_ANNPTR_MSG_PAGE               0x2000

#define RTL8211F_ANNPTR_ACK2                   0x1000

#define RTL8211F_ANNPTR_TOGGLE                 0x0800

#define RTL8211F_ANNPTR_MESSAGE                0x07FF


//Auto-Negotiation Next Page Receive register

#define RTL8211F_ANNPRR_NEXT_PAGE              0x8000

#define RTL8211F_ANNPRR_ACK                    0x4000

#define RTL8211F_ANNPRR_MSG_PAGE               0x2000

#define RTL8211F_ANNPRR_ACK2                   0x1000

#define RTL8211F_ANNPRR_TOGGLE                 0x0800

#define RTL8211F_ANNPRR_MESSAGE                0x07FF


//1000Base-T Control register

#define RTL8211F_GBCR_TEST_MODE                0xE000

#define RTL8211F_GBCR_MS_MAN_CONF_EN           0x1000

#define RTL8211F_GBCR_MS_MAN_CONF_VAL          0x0800

#define RTL8211F_GBCR_PORT_TYPE                0x0400

#define RTL8211F_GBCR_1000BT_FD                0x0200


//1000Base-T Status register

#define RTL8211F_GBSR_MS_CONF_FAULT            0x8000

#define RTL8211F_GBSR_MS_CONF_RES              0x4000

#define RTL8211F_GBSR_LOCAL_RECEIVER_STATUS    0x2000

#define RTL8211F_GBSR_REMOTE_RECEIVER_STATUS   0x1000

#define RTL8211F_GBSR_LP_1000BT_FD             0x0800

#define RTL8211F_GBSR_LP_1000BT_HD             0x0400

#define RTL8211F_GBSR_IDLE_ERR_COUNT           0x00FF


//MMD Access Control register

#define RTL8211F_MMDACR_FUNC                   0xC000

#define RTL8211F_MMDACR_FUNC_ADDR              0x0000

#define RTL8211F_MMDACR_FUNC_DATA_NO_POST_INC  0x4000

#define RTL8211F_MMDACR_FUNC_DATA_POST_INC_RW  0x8000

#define RTL8211F_MMDACR_FUNC_DATA_POST_INC_W   0xC000

#define RTL8211F_MMDACR_DEVAD                  0x001F


//1000Base-T Extended Status register

#define RTL8211F_GBESR_1000BX_FD               0x8000

#define RTL8211F_GBESR_1000BX_HD               0x4000

#define RTL8211F_GBESR_1000BT_FD               0x2000

#define RTL8211F_GBESR_1000BT_HD               0x1000


//Interrupt Enable register

#define RTL8211F_INER_JABBER                   0x0400

#define RTL8211F_INER_ALDPS_STATE              0x0200

#define RTL8211F_INER_PME                      0x0080

#define RTL8211F_INER_PHY_REG_ACCESS           0x0020

#define RTL8211F_INER_LINK_STATUS              0x0010

#define RTL8211F_INER_AN_COMPLETE              0x0008

#define RTL8211F_INER_PAGE_RECEIVED            0x0004

#define RTL8211F_INER_AN_ERROR                 0x0001


//PHY Specific Control 1 register

#define RTL8211F_PHYCR1_PHYAD_0_EN             0x2000

#define RTL8211F_PHYCR1_MDI_MODE_MANUAL_CONFIG 0x0200

#define RTL8211F_PHYCR1_MDI_MODE               0x0100

#define RTL8211F_PHYCR1_TX_CRS_EN              0x0080

#define RTL8211F_PHYCR1_PHYAD_NON_ZERO_DETECT  0x0040

#define RTL8211F_PHYCR1_PREAMBLE_CHECK_EN      0x0010

#define RTL8211F_PHYCR1_JABBER_DETECT_EN       0x0008

#define RTL8211F_PHYCR1_ALDPS_EN               0x0004


//PHY Specific Control 2 register

#define RTL8211F_PHYCR2_CLKOUT_FREQ_SEL        0x0800

#define RTL8211F_PHYCR2_CLKOUT_SSC_EN          0x0080

#define RTL8211F_PHYCR2_RXC_SSC_EN             0x0008

#define RTL8211F_PHYCR2_RXC_EN                 0x0002

#define RTL8211F_PHYCR2_CLKOUT_EN              0x0001


//PHY Specific Status register

#define RTL8211F_PHYSR_ALDPS_STATE             0x4000

#define RTL8211F_PHYSR_MDI_PLUG                0x2000

#define RTL8211F_PHYSR_NWAY_EN                 0x1000

#define RTL8211F_PHYSR_MASTER_MODE             0x0800

#define RTL8211F_PHYSR_EEE_CAPABLE             0x0100

#define RTL8211F_PHYSR_RX_FLOW_EN              0x0080

#define RTL8211F_PHYSR_TX_FLOW_EN              0x0040

#define RTL8211F_PHYSR_SPEED                   0x0030

#define RTL8211F_PHYSR_SPEED_10MBPS            0x0000

#define RTL8211F_PHYSR_SPEED_100MBPS           0x0010

#define RTL8211F_PHYSR_SPEED_1000MBPS          0x0020

#define RTL8211F_PHYSR_DUPLEX                  0x0008

#define RTL8211F_PHYSR_LINK                    0x0004

#define RTL8211F_PHYSR_MDI_CROSSOVER_STATUS    0x0002

#define RTL8211F_PHYSR_JABBER                  0x0001


//Interrupt Status register

#define RTL8211F_INSR_JABBER                   0x0400

#define RTL8211F_INSR_ALDPS_STATE              0x0200

#define RTL8211F_INSR_PME                      0x0080

#define RTL8211F_INSR_PHY_REG_ACCESS           0x0020

#define RTL8211F_INSR_LINK_STATUS              0x0010

#define RTL8211F_INSR_AN_COMPLETE              0x0008

#define RTL8211F_INSR_PAGE_RECEIVED            0x0004

#define RTL8211F_INSR_AN_ERROR                 0x0001


//Page Select register

#define RTL8211F_PAGSR_PAGE_SEL                0x0007


//PCS Control 1 register

#define RTL8211F_PC1R_CLK_STOP_EN              0x0400


//PCS Status 1 register

#define RTL8211F_PS1R_TX_LPI_RCVD              0x0800

#define RTL8211F_PS1R_RX_LPI_RCVD              0x0400

#define RTL8211F_PS1R_TX_LPI_IND               0x0200

#define RTL8211F_PS1R_RX_LPI_IND               0x0100

#define RTL8211F_PS1R_CLK_STOP_CAPABLE         0x0040


//EEE Capability register

#define RTL8211F_EEECR_1000BT_EEE              0x0004

#define RTL8211F_EEECR_100BTX_EEE              0x0002


//EEE Advertisement register

#define RTL8211F_EEEAR_1000BT_EEE              0x0004

#define RTL8211F_EEEAR_100BTX_EEE              0x0002


//EEE Link Partner Ability register

#define RTL8211F_EEELPAR_LP_1000BT_EEE         0x0004

#define RTL8211F_EEELPAR_LP_100BTX_EEE         0x0002


//C++ guard

#ifdef __cplusplus

extern "C" {

#endif


//RTL8211F Ethernet PHY driver

extern const PhyDriver rtl8211fPhyDriver;


//RTL8211F related functions

error_t rtl8211fInit(NetInterface *interface);

void rtl8211fInitHook(NetInterface *interface);


void rtl8211fTick(NetInterface *interface);


void rtl8211fEnableIrq(NetInterface *interface);

void rtl8211fDisableIrq(NetInterface *interface);


void rtl8211fEventHandler(NetInterface *interface);


void rtl8211fWritePhyReg(NetInterface *interface, uint8_t address,

   uint16_t data);


uint16_t rtl8211fReadPhyReg(NetInterface *interface, uint8_t address);


void rtl8211fDumpPhyReg(NetInterface *interface);


void rtl8211fWriteMmdReg(NetInterface *interface, uint8_t devAddr,

   uint16_t regAddr, uint16_t data);


uint16_t rtl8211fReadMmdReg(NetInterface *interface, uint8_t devAddr,

   uint16_t regAddr);


//C++ guard

#ifdef __cplusplus

}

#endif


#endif

error_t
error_t
Error codes.
Definition error.h:43

nic.h
Network interface controller abstraction layer.

PhyDriver
Ethernet PHY driver.
Definition nic.h:308