same54_eth_driver.h

Go to the documentation of this file.

 
#ifndef _SAME54_ETH_DRIVER_H
#define _SAME54_ETH_DRIVER_H
 
//Number of TX buffers
#ifndef SAME54_ETH_TX_BUFFER_COUNT
   #define SAME54_ETH_TX_BUFFER_COUNT 3
#elif (SAME54_ETH_TX_BUFFER_COUNT < 1)
   #error SAME54_ETH_TX_BUFFER_COUNT parameter is not valid
#endif
 
//TX buffer size
#ifndef SAME54_ETH_TX_BUFFER_SIZE
   #define SAME54_ETH_TX_BUFFER_SIZE 1536
#elif (SAME54_ETH_TX_BUFFER_SIZE != 1536)
   #error SAME54_ETH_TX_BUFFER_SIZE parameter is not valid
#endif
 
//Number of RX buffers
#ifndef SAME54_ETH_RX_BUFFER_COUNT
   #define SAME54_ETH_RX_BUFFER_COUNT 72
#elif (SAME54_ETH_RX_BUFFER_COUNT < 12)
   #error SAME54_ETH_RX_BUFFER_COUNT parameter is not valid
#endif
 
//RX buffer size
#ifndef SAME54_ETH_RX_BUFFER_SIZE
   #define SAME54_ETH_RX_BUFFER_SIZE 128
#elif (SAME54_ETH_RX_BUFFER_SIZE != 128)
   #error SAME54_ETH_RX_BUFFER_SIZE parameter is not valid
#endif
 
//Interrupt priority grouping
#ifndef SAME54_ETH_IRQ_PRIORITY_GROUPING
   #define SAME54_ETH_IRQ_PRIORITY_GROUPING 4
#elif (SAME54_ETH_IRQ_PRIORITY_GROUPING < 0)
   #error SAME54_ETH_IRQ_PRIORITY_GROUPING parameter is not valid
#endif
 
//Ethernet interrupt group priority
#ifndef SAME54_ETH_IRQ_GROUP_PRIORITY
   #define SAME54_ETH_IRQ_GROUP_PRIORITY 6
#elif (SAME54_ETH_IRQ_GROUP_PRIORITY < 0)
   #error SAME54_ETH_IRQ_GROUP_PRIORITY parameter is not valid
#endif
 
//Ethernet interrupt subpriority
#ifndef SAME54_ETH_IRQ_SUB_PRIORITY
   #define SAME54_ETH_IRQ_SUB_PRIORITY 0
#elif (SAME54_ETH_IRQ_SUB_PRIORITY < 0)
   #error SAME54_ETH_IRQ_SUB_PRIORITY parameter is not valid
#endif
 
//TX buffer descriptor flags
#define GMAC_TX_USED           0x80000000
#define GMAC_TX_WRAP           0x40000000
#define GMAC_TX_RLE_ERROR      0x20000000
#define GMAC_TX_UNDERRUN_ERROR 0x10000000
#define GMAC_TX_AHB_ERROR      0x08000000
#define GMAC_TX_LATE_COL_ERROR 0x04000000
#define GMAC_TX_CHECKSUM_ERROR 0x00700000
#define GMAC_TX_NO_CRC         0x00010000
#define GMAC_TX_LAST           0x00008000
#define GMAC_TX_LENGTH         0x00003FFF
 
//RX buffer descriptor flags
#define GMAC_RX_ADDRESS        0xFFFFFFFC
#define GMAC_RX_WRAP           0x00000002
#define GMAC_RX_OWNERSHIP      0x00000001
#define GMAC_RX_BROADCAST      0x80000000
#define GMAC_RX_MULTICAST_HASH 0x40000000
#define GMAC_RX_UNICAST_HASH   0x20000000
#define GMAC_RX_SAR            0x08000000
#define GMAC_RX_SAR_MASK       0x06000000
#define GMAC_RX_TYPE_ID        0x01000000
#define GMAC_RX_SNAP           0x01000000
#define GMAC_RX_TYPE_ID_MASK   0x00C00000
#define GMAC_RX_CHECKSUM_VALID 0x00C00000
#define GMAC_RX_VLAN_TAG       0x00200000
#define GMAC_RX_PRIORITY_TAG   0x00100000
#define GMAC_RX_VLAN_PRIORITY  0x000E0000
#define GMAC_RX_CFI            0x00010000
#define GMAC_RX_EOF            0x00008000
#define GMAC_RX_SOF            0x00004000
#define GMAC_RX_LENGTH_MSB     0x00002000
#define GMAC_RX_BAD_FCS        0x00002000
#define GMAC_RX_LENGTH         0x00001FFF
 
//C++ guard
#ifdef __cplusplus
extern "C" {
#endif
 
 
typedef struct
{
   uint32_t address;
   uint32_t status;
} Same54TxBufferDesc;
 
 
typedef struct
{
   uint32_t address;
   uint32_t status;
} Same54RxBufferDesc;
 
 
//SAME54 Ethernet MAC driver
extern const NicDriver same54EthDriver;
 
//SAME54 Ethernet MAC related functions
error_t same54EthInit(NetInterface *interface);
void same54EthInitGpio(NetInterface *interface);
void same54EthInitBufferDesc(NetInterface *interface);
 
void same54EthTick(NetInterface *interface);
 
void same54EthEnableIrq(NetInterface *interface);
void same54EthDisableIrq(NetInterface *interface);
void same54EthEventHandler(NetInterface *interface);
 
error_t same54EthSendPacket(NetInterface *interface,
   const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary);
 
error_t same54EthReceivePacket(NetInterface *interface);
 
error_t same54EthUpdateMacAddrFilter(NetInterface *interface);
error_t same54EthUpdateMacConfig(NetInterface *interface);
 
void same54EthWritePhyReg(uint8_t opcode, uint8_t phyAddr,
   uint8_t regAddr, uint16_t data);
 
uint16_t same54EthReadPhyReg(uint8_t opcode, uint8_t phyAddr,
   uint8_t regAddr);
 
//C++ guard
#ifdef __cplusplus
}
#endif
 
#endif