mikroSDK Reference Manual
stm32f2xx_hal_conf.h
1
22/* Define to prevent recursive inclusion -------------------------------------*/
23#ifndef __STM32F2xx_HAL_CONF_H
24#define __STM32F2xx_HAL_CONF_H
25
26#ifdef __cplusplus
27 extern "C" {
28#endif
29
30/* Exported types ------------------------------------------------------------*/
31/* Exported constants --------------------------------------------------------*/
32
33/* ########################## Module Selection ############################## */
37// #define HAL_MODULE_ENABLED
38// #define HAL_ADC_MODULE_ENABLED
39// #define HAL_CAN_MODULE_ENABLED
40// #define HAL_CAN_LEGACY_MODULE_ENABLED
41// #define HAL_CRC_MODULE_ENABLED
42// #define HAL_CRYP_MODULE_ENABLED
43// #define HAL_DAC_MODULE_ENABLED
44// #define HAL_DCMI_MODULE_ENABLED
45// #define HAL_DMA_MODULE_ENABLED
46// #define HAL_ETH_MODULE_ENABLED
47// #define HAL_EXTI_MODULE_ENABLED
48// #define HAL_FLASH_MODULE_ENABLED
49// #define HAL_NAND_MODULE_ENABLED
50// #define HAL_NOR_MODULE_ENABLED
51// #define HAL_PCCARD_MODULE_ENABLED
52// #define HAL_SRAM_MODULE_ENABLED
53// #define HAL_HASH_MODULE_ENABLED
54#define HAL_GPIO_MODULE_ENABLED
55// #define HAL_I2C_MODULE_ENABLED
56// #define HAL_I2S_MODULE_ENABLED
57// #define HAL_IWDG_MODULE_ENABLED
58// #define HAL_PWR_MODULE_ENABLED
59#define HAL_RCC_MODULE_ENABLED
60// #define HAL_RNG_MODULE_ENABLED
61// #define HAL_RTC_MODULE_ENABLED
62// #define HAL_SD_MODULE_ENABLED
63// #define HAL_SPI_MODULE_ENABLED
64// #define HAL_TIM_MODULE_ENABLED
65// #define HAL_UART_MODULE_ENABLED
66// #define HAL_USART_MODULE_ENABLED
67// #define HAL_IRDA_MODULE_ENABLED
68// #define HAL_SMARTCARD_MODULE_ENABLED
69// #define HAL_WWDG_MODULE_ENABLED
70#define HAL_CORTEX_MODULE_ENABLED
71// #define HAL_PCD_MODULE_ENABLED
72// #define HAL_HCD_MODULE_ENABLED
73// #define HAL_MMC_MODULE_ENABLED
74
75/* ########################## HSE/HSI Values adaptation ##################### */
81#if !defined (HSE_VALUE)
82 #define HSE_VALUE 25000000U
83#endif /* HSE_VALUE */
84
85#if !defined (HSE_STARTUP_TIMEOUT)
86 #define HSE_STARTUP_TIMEOUT 100U
87#endif /* HSE_STARTUP_TIMEOUT */
88
94#if !defined (HSI_VALUE)
95 #define HSI_VALUE 16000000U
96#endif /* HSI_VALUE */
97
101#if !defined (LSI_VALUE)
102 #define LSI_VALUE 32000U
103#endif /* LSI_VALUE */
109#if !defined (LSE_VALUE)
110 #define LSE_VALUE 32768U
111#endif /* LSE_VALUE */
112
113#if !defined (LSE_STARTUP_TIMEOUT)
114 #define LSE_STARTUP_TIMEOUT 5000U
115#endif /* LSE_STARTUP_TIMEOUT */
116
122#if !defined (EXTERNAL_CLOCK_VALUE)
123 #define EXTERNAL_CLOCK_VALUE 12288000U
124#endif /* EXTERNAL_CLOCK_VALUE */
125
126/* Tip: To avoid modifying this file each time you need to use different HSE,
127 === you can define the HSE value in your toolchain compiler preprocessor. */
128
129/* ########################### System Configuration ######################### */
133#define VDD_VALUE 3300U
134#define TICK_INT_PRIORITY 0x0FU
135#define USE_RTOS 0U
136#define PREFETCH_ENABLE 1U
137#define INSTRUCTION_CACHE_ENABLE 1U
138#define DATA_CACHE_ENABLE 1U
139
140#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
141#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
142#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
143#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
144#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
145#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
146#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
147#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
148#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
149#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
150#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
151#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
152#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
153#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
154#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
155#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
156#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
157#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
158#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
159#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
160#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
161#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
162#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
163#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
164#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
165#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
166
167/* ########################## Assert Selection ############################## */
172/* #define USE_FULL_ASSERT 1U */
173
174/* ################## Ethernet peripheral configuration ##################### */
175
176/* Section 1 : Ethernet peripheral configuration */
177
178/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
179#define MAC_ADDR0 2U
180#define MAC_ADDR1 0U
181#define MAC_ADDR2 0U
182#define MAC_ADDR3 0U
183#define MAC_ADDR4 0U
184#define MAC_ADDR5 0U
185
186/* Definition of the Ethernet driver buffers size and count */
187#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
188#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
189#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
190#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
191
192/* Section 2: PHY configuration section */
193
194/* DP83848 PHY Address*/
195#define DP83848_PHY_ADDRESS 0x01U
196/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
197#define PHY_RESET_DELAY 0x000000FFU
198/* PHY Configuration delay */
199#define PHY_CONFIG_DELAY 0x00000FFFU
200
201#define PHY_READ_TO 0x0000FFFFU
202#define PHY_WRITE_TO 0x0000FFFFU
203
204/* Section 3: Common PHY Registers */
205
206#define PHY_BCR ((uint16_t)0x0000)
207#define PHY_BSR ((uint16_t)0x0001)
209#define PHY_RESET ((uint16_t)0x8000)
210#define PHY_LOOPBACK ((uint16_t)0x4000)
211#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100)
212#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000)
213#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100)
214#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000)
215#define PHY_AUTONEGOTIATION ((uint16_t)0x1000)
216#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200)
217#define PHY_POWERDOWN ((uint16_t)0x0800)
218#define PHY_ISOLATE ((uint16_t)0x0400)
220#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020)
221#define PHY_LINKED_STATUS ((uint16_t)0x0004)
222#define PHY_JABBER_DETECTION ((uint16_t)0x0002)
224/* Section 4: Extended PHY Registers */
225
226#define PHY_SR ((uint16_t)0x0010)
227#define PHY_MICR ((uint16_t)0x0011)
228#define PHY_MISR ((uint16_t)0x0012)
230#define PHY_LINK_STATUS ((uint16_t)0x0001)
231#define PHY_SPEED_STATUS ((uint16_t)0x0002)
232#define PHY_DUPLEX_STATUS ((uint16_t)0x0004)
234#define PHY_MICR_INT_EN ((uint16_t)0x0002)
235#define PHY_MICR_INT_OE ((uint16_t)0x0001)
237#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020)
238#define PHY_LINK_INTERRUPT ((uint16_t)0x2000)
240/* ################## SPI peripheral configuration ########################## */
241
242/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
243* Activated: CRC code is present inside driver
244* Deactivated: CRC code cleaned from driver
245*/
246
247#define USE_SPI_CRC 1U
248
249/* Includes ------------------------------------------------------------------*/
254#ifdef HAL_RCC_MODULE_ENABLED
255 #include "stm32f2xx_hal_rcc.h"
256#endif /* HAL_RCC_MODULE_ENABLED */
257
258#ifdef HAL_GPIO_MODULE_ENABLED
259 #include "stm32f2xx_hal_gpio.h"
260#endif /* HAL_GPIO_MODULE_ENABLED */
261
262#ifdef HAL_EXTI_MODULE_ENABLED
263 #include "stm32f2xx_hal_exti.h"
264#endif /* HAL_EXTI_MODULE_ENABLED */
265
266#ifdef HAL_DMA_MODULE_ENABLED
267 #include "stm32f2xx_hal_dma.h"
268#endif /* HAL_DMA_MODULE_ENABLED */
269
270#ifdef HAL_CORTEX_MODULE_ENABLED
271 #include "stm32f2xx_hal_cortex.h"
272#endif /* HAL_CORTEX_MODULE_ENABLED */
273
274#ifdef HAL_ADC_MODULE_ENABLED
275 #include "stm32f2xx_hal_adc.h"
276#endif /* HAL_ADC_MODULE_ENABLED */
277
278#ifdef HAL_CAN_MODULE_ENABLED
279 #include "stm32f2xx_hal_can.h"
280#endif /* HAL_CAN_MODULE_ENABLED */
281
282#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
283 #include "stm32f2xx_hal_can_legacy.h"
284#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
285
286#ifdef HAL_CRC_MODULE_ENABLED
287 #include "stm32f2xx_hal_crc.h"
288#endif /* HAL_CRC_MODULE_ENABLED */
289
290#ifdef HAL_CRYP_MODULE_ENABLED
291 #include "stm32f2xx_hal_cryp.h"
292#endif /* HAL_CRYP_MODULE_ENABLED */
293
294#ifdef HAL_DAC_MODULE_ENABLED
295 #include "stm32f2xx_hal_dac.h"
296#endif /* HAL_DAC_MODULE_ENABLED */
297
298#ifdef HAL_DCMI_MODULE_ENABLED
299 #include "stm32f2xx_hal_dcmi.h"
300#endif /* HAL_DCMI_MODULE_ENABLED */
301
302#ifdef HAL_ETH_MODULE_ENABLED
303 #include "stm32f2xx_hal_eth.h"
304#endif /* HAL_ETH_MODULE_ENABLED */
305
306#ifdef HAL_FLASH_MODULE_ENABLED
307 #include "stm32f2xx_hal_flash.h"
308#endif /* HAL_FLASH_MODULE_ENABLED */
309
310#ifdef HAL_SRAM_MODULE_ENABLED
311 #include "stm32f2xx_hal_sram.h"
312#endif /* HAL_SRAM_MODULE_ENABLED */
313
314#ifdef HAL_NOR_MODULE_ENABLED
315 #include "stm32f2xx_hal_nor.h"
316#endif /* HAL_NOR_MODULE_ENABLED */
317
318#ifdef HAL_NAND_MODULE_ENABLED
319 #include "stm32f2xx_hal_nand.h"
320#endif /* HAL_NAND_MODULE_ENABLED */
321
322#ifdef HAL_PCCARD_MODULE_ENABLED
323 #include "stm32f2xx_hal_pccard.h"
324#endif /* HAL_PCCARD_MODULE_ENABLED */
325
326#ifdef HAL_HASH_MODULE_ENABLED
327 #include "stm32f2xx_hal_hash.h"
328#endif /* HAL_HASH_MODULE_ENABLED */
329
330#ifdef HAL_I2C_MODULE_ENABLED
331 #include "stm32f2xx_hal_i2c.h"
332#endif /* HAL_I2C_MODULE_ENABLED */
333
334#ifdef HAL_I2S_MODULE_ENABLED
335 #include "stm32f2xx_hal_i2s.h"
336#endif /* HAL_I2S_MODULE_ENABLED */
337
338#ifdef HAL_IWDG_MODULE_ENABLED
339 #include "stm32f2xx_hal_iwdg.h"
340#endif /* HAL_IWDG_MODULE_ENABLED */
341
342#ifdef HAL_PWR_MODULE_ENABLED
343 #include "stm32f2xx_hal_pwr.h"
344#endif /* HAL_PWR_MODULE_ENABLED */
345
346#ifdef HAL_RNG_MODULE_ENABLED
347 #include "stm32f2xx_hal_rng.h"
348#endif /* HAL_RNG_MODULE_ENABLED */
349
350#ifdef HAL_RTC_MODULE_ENABLED
351 #include "stm32f2xx_hal_rtc.h"
352#endif /* HAL_RTC_MODULE_ENABLED */
353
354#ifdef HAL_SD_MODULE_ENABLED
355 #include "stm32f2xx_hal_sd.h"
356#endif /* HAL_SD_MODULE_ENABLED */
357
358#ifdef HAL_SPI_MODULE_ENABLED
359 #include "stm32f2xx_hal_spi.h"
360#endif /* HAL_SPI_MODULE_ENABLED */
361
362#ifdef HAL_TIM_MODULE_ENABLED
363 #include "stm32f2xx_hal_tim.h"
364#endif /* HAL_TIM_MODULE_ENABLED */
365
366#ifdef HAL_UART_MODULE_ENABLED
367 #include "stm32f2xx_hal_uart.h"
368#endif /* HAL_UART_MODULE_ENABLED */
369
370#ifdef HAL_USART_MODULE_ENABLED
371 #include "stm32f2xx_hal_usart.h"
372#endif /* HAL_USART_MODULE_ENABLED */
373
374#ifdef HAL_IRDA_MODULE_ENABLED
375 #include "stm32f2xx_hal_irda.h"
376#endif /* HAL_IRDA_MODULE_ENABLED */
377
378#ifdef HAL_SMARTCARD_MODULE_ENABLED
379 #include "stm32f2xx_hal_smartcard.h"
380#endif /* HAL_SMARTCARD_MODULE_ENABLED */
381
382#ifdef HAL_WWDG_MODULE_ENABLED
383 #include "stm32f2xx_hal_wwdg.h"
384#endif /* HAL_WWDG_MODULE_ENABLED */
385
386#ifdef HAL_PCD_MODULE_ENABLED
387 #include "stm32f2xx_hal_pcd.h"
388#endif /* HAL_PCD_MODULE_ENABLED */
389
390#ifdef HAL_HCD_MODULE_ENABLED
391 #include "stm32f2xx_hal_hcd.h"
392#endif /* HAL_HCD_MODULE_ENABLED */
393
394#ifdef HAL_MMC_MODULE_ENABLED
395 #include "stm32f2xx_hal_mmc.h"
396#endif /* HAL_MMC_MODULE_ENABLED */
397/* Exported macro ------------------------------------------------------------*/
398#ifdef USE_FULL_ASSERT
407 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
408/* Exported functions ------------------------------------------------------- */
409 void assert_failed(uint8_t* file, uint32_t line);
410#else
411 #define assert_param(expr) ((void)0U)
412#endif /* USE_FULL_ASSERT */
413
414
415#ifdef __cplusplus
416}
417#endif
418
419#endif /* __STM32F2xx_HAL_CONF_H */
420
421
422/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stm32f2xx_hal_cortex.h
Header file of CORTEX HAL module.
stm32f2xx_hal_gpio.h
Header file of GPIO HAL module.
stm32f2xx_hal_rcc.h
Header file of RCC HAL module.