tja1101__driver_8h_source.html

#ifndef _TJA1101_DRIVER_H

#define _TJA1101_DRIVER_H


//Dependencies

#include "core/nic.h"


//PHY address

#ifndef TJA1101_PHY_ADDR

   #define TJA1101_PHY_ADDR 0

#elif (TJA1101_PHY_ADDR < 0 || TJA1101_PHY_ADDR > 31)

   #error TJA1101_PHY_ADDR parameter is not valid

#endif


//TJA1101 PHY registers

#define TJA1101_BASIC_CTRL                               0x00

#define TJA1101_BASIC_STAT                               0x01

#define TJA1101_PHY_ID1                                  0x02

#define TJA1101_PHY_ID2                                  0x03

#define TJA1101_EXTENDED_STAT                            0x0F

#define TJA1101_PHY_ID3                                  0x10

#define TJA1101_EXTENDED_CTRL                            0x11

#define TJA1101_CONFIG1                                  0x12

#define TJA1101_CONFIG2                                  0x13

#define TJA1101_SYM_ERR_COUNTER                          0x14

#define TJA1101_INT_SRC                                  0x15

#define TJA1101_INT_EN                                   0x16

#define TJA1101_COMM_STAT                                0x17

#define TJA1101_GENERAL_STAT                             0x18

#define TJA1101_EXTERNAL_STAT                            0x19

#define TJA1101_LINK_FAIL_COUNTER                        0x1A

#define TJA1101_COMM_CTRL                                0x1B

#define TJA1101_CONFIG3                                  0x1C


//Basic control register

#define TJA1101_BASIC_CTRL_RESET                         0x8000

#define TJA1101_BASIC_CTRL_LOOPBACK                      0x4000

#define TJA1101_BASIC_CTRL_SPEED_SEL_LSB                 0x2000

#define TJA1101_BASIC_CTRL_AUTONEG_EN                    0x1000

#define TJA1101_BASIC_CTRL_POWER_DOWN                    0x0800

#define TJA1101_BASIC_CTRL_ISOLATE                       0x0400

#define TJA1101_BASIC_CTRL_RE_AUTONEG                    0x0200

#define TJA1101_BASIC_CTRL_DUPLEX_MODE                   0x0100

#define TJA1101_BASIC_CTRL_COL_TEST                      0x0080

#define TJA1101_BASIC_CTRL_SPEED_SEL_MSB                 0x0040

#define TJA1101_BASIC_CTRL_UNIDIRECT_EN                  0x0020


//Basic status register

#define TJA1101_BASIC_STAT_100BT4                        0x8000

#define TJA1101_BASIC_STAT_100BTX_FD                     0x4000

#define TJA1101_BASIC_STAT_100BTX_HD                     0x2000

#define TJA1101_BASIC_STAT_10BT_FD                       0x1000

#define TJA1101_BASIC_STAT_10BT_HD                       0x0800

#define TJA1101_BASIC_STAT_100BT2_FD                     0x0400

#define TJA1101_BASIC_STAT_100BT2_HD                     0x0200

#define TJA1101_BASIC_STAT_EXTENDED_STATUS               0x0100

#define TJA1101_BASIC_STAT_UNIDIRECT_ABILITY             0x0080

#define TJA1101_BASIC_STAT_MF_PREAMBLE_SUPPR             0x0040

#define TJA1101_BASIC_STAT_AUTONEG_COMPLETE              0x0020

#define TJA1101_BASIC_STAT_REMOTE_FAULT                  0x0010

#define TJA1101_BASIC_STAT_AUTONEG_ABILITY               0x0008

#define TJA1101_BASIC_STAT_LINK_STATUS                   0x0004

#define TJA1101_BASIC_STAT_JABBER_DETECT                 0x0002

#define TJA1101_BASIC_STAT_EXTENDED_CAPABILITY           0x0001


//PHY identification 1 register

#define TJA1101_PHY_ID1_OUI_MSB                          0xFFFF

#define TJA1101_PHY_ID1_OUI_MSB_DEFAULT                  0x0180


//PHY identification 2 register

#define TJA1101_PHY_ID2_OUI_LSB                          0xFC00

#define TJA1101_PHY_ID2_OUI_LSB_DEFAULT                  0xDC00

#define TJA1101_PHY_ID2_TYPE_NO                          0x03F0

#define TJA1101_PHY_ID2_TYPE_NO_DEFAULT                  0x0100

#define TJA1101_PHY_ID2_REVISION_NO                      0x000F


//Extended status register

#define TJA1101_EXTENDED_STAT_1000BX_FD                  0x8000

#define TJA1101_EXTENDED_STAT_1000BX_HD                  0x4000

#define TJA1101_EXTENDED_STAT_1000BT_FD                  0x2000

#define TJA1101_EXTENDED_STAT_1000BT_HD                  0x1000

#define TJA1101_EXTENDED_STAT_100BT1                     0x0080

#define TJA1101_EXTENDED_STAT_RTPGE                      0x0040


//PHY identification 3 register

#define TJA1101_PHY_ID3_VERSION_NO                       0x00FF


//Extended control register

#define TJA1101_EXTENDED_CTRL_LINK_CONTROL               0x8000

#define TJA1101_EXTENDED_CTRL_POWER_MODE                 0x7800

#define TJA1101_EXTENDED_CTRL_POWER_MODE_NO_CHANGE       0x0000

#define TJA1101_EXTENDED_CTRL_POWER_MODE_NORMAL          0x1800

#define TJA1101_EXTENDED_CTRL_POWER_MODE_SILENT          0x4800

#define TJA1101_EXTENDED_CTRL_POWER_MODE_SLEEP           0x5000

#define TJA1101_EXTENDED_CTRL_POWER_MODE_SLEEP_REQ       0x5800

#define TJA1101_EXTENDED_CTRL_POWER_MODE_STANDBY         0x6000

#define TJA1101_EXTENDED_CTRL_SLAVE_JITTER_TEST          0x0400

#define TJA1101_EXTENDED_CTRL_TRAINING_RESTART           0x0200

#define TJA1101_EXTENDED_CTRL_TEST_MODE                  0x01C0

#define TJA1101_EXTENDED_CTRL_TEST_MODE_0                0x0000

#define TJA1101_EXTENDED_CTRL_TEST_MODE_1                0x0040

#define TJA1101_EXTENDED_CTRL_TEST_MODE_2                0x0080

#define TJA1101_EXTENDED_CTRL_TEST_MODE_3                0x00C0

#define TJA1101_EXTENDED_CTRL_TEST_MODE_4                0x0100

#define TJA1101_EXTENDED_CTRL_TEST_MODE_5                0x0140

#define TJA1101_EXTENDED_CTRL_TEST_MODE_6                0x0180

#define TJA1101_EXTENDED_CTRL_CABLE_TEST                 0x0020

#define TJA1101_EXTENDED_CTRL_LOOPBACK_MODE              0x0018

#define TJA1101_EXTENDED_CTRL_LOOPBACK_MODE_INTERNAL     0x0000

#define TJA1101_EXTENDED_CTRL_LOOPBACK_MODE_EXTERNAL     0x0008

#define TJA1101_EXTENDED_CTRL_LOOPBACK_MODE_REMOTE       0x0018

#define TJA1101_EXTENDED_CTRL_CONFIG_EN                  0x0004

#define TJA1101_EXTENDED_CTRL_WAKE_REQUEST               0x0001


//Configuration 1 register

#define TJA1101_CONFIG1_MASTER_SLAVE                     0x8000

#define TJA1101_CONFIG1_FWDPHYLOC                        0x4000

#define TJA1101_CONFIG1_REMWUPHY                         0x0800

#define TJA1101_CONFIG1_LOCWUPHY                         0x0400

#define TJA1101_CONFIG1_MII_MODE                         0x0300

#define TJA1101_CONFIG1_MII_MODE_MII                     0x0000

#define TJA1101_CONFIG1_MII_MODE_RMII_50MHZ_REF_CLK_IN   0x0100

#define TJA1101_CONFIG1_MII_MODE_RMII_50MHZ_REF_CLK_OUT  0x0200

#define TJA1101_CONFIG1_MII_MODE_REV_MII                 0x0300

#define TJA1101_CONFIG1_MII_DRIVER                       0x0080

#define TJA1101_CONFIG1_MII_DRIVER_STANDARD              0x0000

#define TJA1101_CONFIG1_MII_DRIVER_REDUCED               0x0080

#define TJA1101_CONFIG1_SLEEP_CONFIRM                    0x0040

#define TJA1101_CONFIG1_LPS_WUR_DIS                      0x0020

#define TJA1101_CONFIG1_SLEEP_ACK                        0x0010

#define TJA1101_CONFIG1_FWDPHYREM                        0x0004

#define TJA1101_CONFIG1_AUTO_PWD                         0x0002

#define TJA1101_CONFIG1_LPS_ACTIVE                       0x0001


//Configuration 2 register

#define TJA1101_CONFIG2_PHYAD                            0xF800

#define TJA1101_CONFIG2_SQI_AVERAGING                    0x0600

#define TJA1101_CONFIG2_SQI_AVERAGING_32_SYMBOLS         0x0000

#define TJA1101_CONFIG2_SQI_AVERAGING_64_SYMBOLS         0x0200

#define TJA1101_CONFIG2_SQI_AVERAGING_128_SYMBOLS        0x0400

#define TJA1101_CONFIG2_SQI_AVERAGING_256_SYMBOLS        0x0600

#define TJA1101_CONFIG2_SQI_WLIMIT                       0x01C0

#define TJA1101_CONFIG2_SQI_WLIMIT_NONE                  0x0000

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_A               0x0040

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_B               0x0080

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_C               0x00C0

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_D               0x0100

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_E               0x0140

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_F               0x0180

#define TJA1101_CONFIG2_SQI_WLIMIT_CLASS_G               0x01C0

#define TJA1101_CONFIG2_SQI_FAILLIMIT                    0x0038

#define TJA1101_CONFIG2_SQI_FAILLIMIT_NONE               0x0000

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_A            0x0008

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_B            0x0010

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_C            0x0018

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_D            0x0020

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_E            0x0028

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_F            0x0030

#define TJA1101_CONFIG2_SQI_FAILLIMIT_CLASS_G            0x0038

#define TJA1101_CONFIG2_JUMBO_ENABLE                     0x0004

#define TJA1101_CONFIG2_SLEEP_REQUEST_TO                 0x0003

#define TJA1101_CONFIG2_SLEEP_REQUEST_TO_0_4MS           0x0000

#define TJA1101_CONFIG2_SLEEP_REQUEST_TO_1MS             0x0001

#define TJA1101_CONFIG2_SLEEP_REQUEST_TO_4MS             0x0002

#define TJA1101_CONFIG2_SLEEP_REQUEST_TO_16MS            0x0003


//Symbol error counter register

#define TJA1101_SYM_ERR_COUNTER_SYM_ERR_CNT              0xFFFF


//Interrupt source register

#define TJA1101_INT_SRC_PWON                             0x8000

#define TJA1101_INT_SRC_WAKEUP                           0x4000

#define TJA1101_INT_SRC_WUR_RECEIVED                     0x2000

#define TJA1101_INT_SRC_LPS_RECEIVED                     0x1000

#define TJA1101_INT_SRC_PHY_INIT_FAIL                    0x0800

#define TJA1101_INT_SRC_LINK_STATUS_FAIL                 0x0400

#define TJA1101_INT_SRC_LINK_STATUS_UP                   0x0200

#define TJA1101_INT_SRC_SYM_ERR                          0x0100

#define TJA1101_INT_SRC_TRAINING_FAILED                  0x0080

#define TJA1101_INT_SRC_SQI_WARNING                      0x0040

#define TJA1101_INT_SRC_CONTROL_ERR                      0x0020

#define TJA1101_INT_SRC_UV_ERR                           0x0008

#define TJA1101_INT_SRC_UV_RECOVERY                      0x0004

#define TJA1101_INT_SRC_TEMP_ERR                         0x0002

#define TJA1101_INT_SRC_SLEEP_ABORT                      0x0001


//Interrupt enable register

#define TJA1101_INT_EN_PWON                              0x8000

#define TJA1101_INT_EN_WAKEUP                            0x4000

#define TJA1101_INT_EN_WUR_RECEIVED                      0x2000

#define TJA1101_INT_EN_LPS_RECEIVED                      0x1000

#define TJA1101_INT_EN_PHY_INIT_FAIL                     0x0800

#define TJA1101_INT_EN_LINK_STATUS_FAIL                  0x0400

#define TJA1101_INT_EN_LINK_STATUS_UP                    0x0200

#define TJA1101_INT_EN_SYM_ERR                           0x0100

#define TJA1101_INT_EN_TRAINING_FAILED                   0x0080

#define TJA1101_INT_EN_SQI_WARNING                       0x0040

#define TJA1101_INT_EN_CONTROL_ERR                       0x0020

#define TJA1101_INT_EN_TXEN_CLAMPED                      0x0010

#define TJA1101_INT_EN_UV_ERR                            0x0008

#define TJA1101_INT_EN_UV_RECOVERY                       0x0004

#define TJA1101_INT_EN_TEMP_ERR                          0x0002

#define TJA1101_INT_EN_SLEEP_ABORT                       0x0001


//Communication status register

#define TJA1101_COMM_STAT_LINK_UP                        0x8000

#define TJA1101_COMM_STAT_TX_MODE                        0x6000

#define TJA1101_COMM_STAT_TX_MODE_DISABLED               0x0000

#define TJA1101_COMM_STAT_TX_MODE_SEND_N                 0x2000

#define TJA1101_COMM_STAT_TX_MODE_SEND_I                 0x4000

#define TJA1101_COMM_STAT_TX_MODE_SEND_Z                 0x6000

#define TJA1101_COMM_STAT_LOC_RCVR_STATUS                0x1000

#define TJA1101_COMM_STAT_REM_RCVR_STATUS                0x0800

#define TJA1101_COMM_STAT_SCR_LOCKED                     0x0400

#define TJA1101_COMM_STAT_SSD_ERR                        0x0200

#define TJA1101_COMM_STAT_ESD_ERR                        0x0100

#define TJA1101_COMM_STAT_SQI                            0x00E0

#define TJA1101_COMM_STAT_SQI_WORSE_THAN_CLASS_A         0x0000

#define TJA1101_COMM_STAT_SQI_CLASS_A                    0x0020

#define TJA1101_COMM_STAT_SQI_CLASS_B                    0x0040

#define TJA1101_COMM_STAT_SQI_CLASS_C                    0x0060

#define TJA1101_COMM_STAT_SQI_CLASS_D                    0x0080

#define TJA1101_COMM_STAT_SQI_CLASS_E                    0x00A0

#define TJA1101_COMM_STAT_SQI_CLASS_F                    0x00C0

#define TJA1101_COMM_STAT_SQI_CLASS_G                    0x00E0

#define TJA1101_COMM_STAT_RECEIVE_ERR                    0x0010

#define TJA1101_COMM_STAT_TRANSMIT_ERR                   0x0008

#define TJA1101_COMM_STAT_PHY_STATE                      0x0007

#define TJA1101_COMM_STAT_PHY_STATE_IDLE                 0x0000

#define TJA1101_COMM_STAT_PHY_STATE_INITIALIZING         0x0001

#define TJA1101_COMM_STAT_PHY_STATE_CONFIGURED           0x0002

#define TJA1101_COMM_STAT_PHY_STATE_OFFLINE              0x0003

#define TJA1101_COMM_STAT_PHY_STATE_ACTIVE               0x0004

#define TJA1101_COMM_STAT_PHY_STATE_ISOLATE              0x0005

#define TJA1101_COMM_STAT_PHY_STATE_CABLE_TEST           0x0006

#define TJA1101_COMM_STAT_PHY_STATE_TEST_MODE            0x0007


//General status register

#define TJA1101_GENERAL_STAT_INT_STATUS                  0x8000

#define TJA1101_GENERAL_STAT_PLL_LOCKED                  0x4000

#define TJA1101_GENERAL_STAT_LOCAL_WU                    0x2000

#define TJA1101_GENERAL_STAT_REMOTE_WU                   0x1000

#define TJA1101_GENERAL_STAT_DATA_DET_WU                 0x0800

#define TJA1101_GENERAL_STAT_EN_STATUS                   0x0400

#define TJA1101_GENERAL_STAT_RESET_STATUS                0x0200

#define TJA1101_GENERAL_STAT_LINKFAIL_CNT                0x00F8


//External status register

#define TJA1101_EXTERNAL_STAT_UV_VDDA_3V3                0x8000

#define TJA1101_EXTERNAL_STAT_UV_VDDD_1V8                0x4000

#define TJA1101_EXTERNAL_STAT_UV_VDDA_1V8                0x2000

#define TJA1101_EXTERNAL_STAT_UV_VDDIO                   0x0800

#define TJA1101_EXTERNAL_STAT_TEMP_HIGH                  0x0400

#define TJA1101_EXTERNAL_STAT_TEMP_WARN                  0x0200

#define TJA1101_EXTERNAL_STAT_SHORT_DETECT               0x0100

#define TJA1101_EXTERNAL_STAT_OPEN_DETECT                0x0080

#define TJA1101_EXTERNAL_STAT_POLARITY_DETECT            0x0040

#define TJA1101_EXTERNAL_STAT_INTERLEAVE_DETECT          0x0020


//Link-fail counter register

#define TJA1101_LINK_FAIL_COUNTER_LOC_RCVR_CNT           0xFF00

#define TJA1101_LINK_FAIL_COUNTER_REM_RCVR_CNT           0x00FF


//Common configuration register

#define TJA1101_COMM_CTRL_AUTO_OP                        0x8000

#define TJA1101_COMM_CTRL_CLK_MODE                       0x3000

#define TJA1101_COMM_CTRL_CLK_MODE_25MHZ_XTAL_NO_CLK_OUT 0x0000

#define TJA1101_COMM_CTRL_CLK_MODE_25MHZ_XTAL_CLK_OUT    0x1000

#define TJA1101_COMM_CTRL_CLK_MODE_25MHZ_EXT_CLK_IN      0x2000

#define TJA1101_COMM_CTRL_CLK_MODE_50MHZ_REF_CLK_IN      0x3000

#define TJA1101_COMM_CTRL_LDO_MODE                       0x0800

#define TJA1101_COMM_CTRL_CLK_DRIVER                     0x0400

#define TJA1101_COMM_CTRL_CLK_HOLD                       0x0200

#define TJA1101_COMM_CTRL_LOC_WU_TIM                     0x0180

#define TJA1101_COMM_CTRL_LOC_WU_TIM_LONGEST             0x0000

#define TJA1101_COMM_CTRL_LOC_WU_TIM_LONG                0x0080

#define TJA1101_COMM_CTRL_LOC_WU_TIM_SHORT               0x0100

#define TJA1101_COMM_CTRL_LOC_WU_TIM_SHORTEST            0x0180

#define TJA1101_COMM_CTRL_CONFIG_WAKE                    0x0040

#define TJA1101_COMM_CTRL_CONFIG_INH                     0x0020


//Configuration 3 register

#define TJA1101_CONFIG3_FORCE_SLEEP                      0x0002


//C++ guard

#ifdef __cplusplus

extern "C" {

#endif


//TJA1101 Ethernet PHY driver

extern const PhyDriver tja1101PhyDriver;


//TJA1101 related functions

error_t tja1101Init(NetInterface *interface);

void tja1101InitHook(NetInterface *interface);


void tja1101Tick(NetInterface *interface);


void tja1101EnableIrq(NetInterface *interface);

void tja1101DisableIrq(NetInterface *interface);


void tja1101EventHandler(NetInterface *interface);


void tja1101WritePhyReg(NetInterface *interface, uint8_t address,

   uint16_t data);


uint16_t tja1101ReadPhyReg(NetInterface *interface, uint8_t address);


void tja1101DumpPhyReg(NetInterface *interface);


//C++ guard

#ifdef __cplusplus

}

#endif


#endif

error_t
error_t
Error codes.
Definition error.h:43

nic.h
Network interface controller abstraction layer.

PhyDriver
Ethernet PHY driver.
Definition nic.h:308