upd60611__driver_8h_source.html

#ifndef _UPD60611_DRIVER_H

#define _UPD60611_DRIVER_H


//Dependencies

#include "core/nic.h"


//PHY address

#ifndef UPD60611_PHY_ADDR

   #define UPD60611_PHY_ADDR 0

#elif (UPD60611_PHY_ADDR < 0 || UPD60611_PHY_ADDR > 31)

   #error UPD60611_PHY_ADDR parameter is not valid

#endif


//uPD60611 PHY registers

#define UPD60611_BMCR                          0x00

#define UPD60611_BMSR                          0x01

#define UPD60611_PHYID1                        0x02

#define UPD60611_PHYID2                        0x03

#define UPD60611_ANAR                          0x04

#define UPD60611_ANLPAR                        0x05

#define UPD60611_ANER                          0x06

#define UPD60611_ANNPR                         0x07

#define UPD60611_SRR                           0x10

#define UPD60611_MCSR                          0x11

#define UPD60611_SMR                           0x12

#define UPD60611_EBSR                          0x13

#define UPD60611_BER                           0x17

#define UPD60611_FEQMR                         0x18

#define UPD60611_DCSR                          0x19

#define UPD60611_DCR                           0x1A

#define UPD60611_SCSIR                         0x1B

#define UPD60611_ISR                           0x1D

#define UPD60611_IER                           0x1E

#define UPD60611_PSCSR                         0x1F


//Basic Control register

#define UPD60611_BMCR_RESET                    0x8000

#define UPD60611_BMCR_LOOPBACK                 0x4000

#define UPD60611_BMCR_SPEED_SEL                0x2000

#define UPD60611_BMCR_AN_EN                    0x1000

#define UPD60611_BMCR_POWER_DOWN               0x0800

#define UPD60611_BMCR_ISOLATE                  0x0400

#define UPD60611_BMCR_RESTART_AN               0x0200

#define UPD60611_BMCR_DUPLEX_MODE              0x0100

#define UPD60611_BMCR_COL_TEST                 0x0080


//Basic Status register

#define UPD60611_BMSR_100BT4                   0x8000

#define UPD60611_BMSR_100BTX_FD                0x4000

#define UPD60611_BMSR_100BTX_HD                0x2000

#define UPD60611_BMSR_10BT_FD                  0x1000

#define UPD60611_BMSR_10BT_HD                  0x0800

#define UPD60611_BMSR_AN_COMPLETE              0x0020

#define UPD60611_BMSR_REMOTE_FAULT             0x0010

#define UPD60611_BMSR_AN_CAPABLE               0x0008

#define UPD60611_BMSR_LINK_STATUS              0x0004

#define UPD60611_BMSR_JABBER_DETECT            0x0002

#define UPD60611_BMSR_EXTENDED_CAPABLE         0x0001


//PHY Identifier 1 register

#define UPD60611_PHYID1_PHY_ID_NUM_MSB         0xFFFF

#define UPD60611_PHYID1_PHY_ID_NUM_MSB_DEFAULT 0xB824


//PHY Identifier 2 register

#define UPD60611_PHYID2_PHY_ID_NUM_LSB         0xFC00

#define UPD60611_PHYID2_PHY_ID_NUM_LSB_DEFAULT 0x2800

#define UPD60611_PHYID2_MODEL_NUM              0x03F0

#define UPD60611_PHYID2_MODEL_NUM_DEFAULT      0x0010

#define UPD60611_PHYID2_REVISION_NUM           0x000F


//Auto-Negotiation Advertisement register

#define UPD60611_ANAR_NEXT_PAGE                0x8000

#define UPD60611_ANAR_REMOTE_FAULT             0x2000

#define UPD60611_ANAR_PAUSE                    0x0C00

#define UPD60611_ANAR_100BT4                   0x0200

#define UPD60611_ANAR_100BTX_FD                0x0100

#define UPD60611_ANAR_100BTX_HD                0x0080

#define UPD60611_ANAR_10BT_FD                  0x0040

#define UPD60611_ANAR_10BT_HD                  0x0020

#define UPD60611_ANAR_SELECTOR                 0x001F

#define UPD60611_ANAR_SELECTOR_DEFAULT         0x0001


//Auto-Negotiation Link Partner Ability register

#define UPD60611_ANLPAR_NEXT_PAGE              0x8000

#define UPD60611_ANLPAR_ACK                    0x4000

#define UPD60611_ANLPAR_REMOTE_FAULT           0x2000

#define UPD60611_ANLPAR_PAUSE                  0x0400

#define UPD60611_ANLPAR_100BT4                 0x0200

#define UPD60611_ANLPAR_100BTX_FD              0x0100

#define UPD60611_ANLPAR_100BTX_HD              0x0080

#define UPD60611_ANLPAR_10BT_FD                0x0040

#define UPD60611_ANLPAR_10BT_HD                0x0020

#define UPD60611_ANLPAR_SELECTOR               0x001F

#define UPD60611_ANLPAR_SELECTOR_DEFAULT       0x0001


//Auto-Negotiation Expansion register

#define UPD60611_ANER_PAR_DETECT_FAULT         0x0010

#define UPD60611_ANER_LP_NEXT_PAGE_ABLE        0x0008

#define UPD60611_ANER_NEXT_PAGE_ABLE           0x0004

#define UPD60611_ANER_PAGE_RECEIVED            0x0002

#define UPD60611_ANER_LP_AN_ABLE               0x0001


//Auto-Negotiation Next Page Transmit register

#define UPD60611_ANNPR_NEXT_PAGE               0x8000

#define UPD60611_ANNPR_MSG_PAGE                0x2000

#define UPD60611_ANNPR_ACK2                    0x1000

#define UPD60611_ANNPR_TOGGLE                  0x0800

#define UPD60611_ANNPR_MESSAGE                 0x07FF


//Silicon Revision register

#define UPD60611_SRR_SILICON_REV               0x03C0


//Mode Control/Status register

#define UPD60611_MCSR_EDPWRDOWN                0x2000

#define UPD60611_MCSR_FARLOOPBACK              0x0200

#define UPD60611_MCSR_FASTEST                  0x0100

#define UPD60611_MCSR_AUTOMDIX_EN              0x0080

#define UPD60611_MCSR_MDI_MODE                 0x0040

#define UPD60611_MCSR_FORCE_GOOD_LINK          0x0004

#define UPD60611_MCSR_ENERGYON                 0x0002


//Special Modes register

#define UPD60611_SMR_FX_MODE                   0x0400

#define UPD60611_SMR_PHY_MODE                  0x01E0

#define UPD60611_SMR_PHY_ADD_DEV               0x0018

#define UPD60611_SMR_PHY_ADD_MOD               0x0007


//Elastic Buffer Status register

#define UPD60611_EBSR_T_EL_BUF_OVF             0x0080

#define UPD60611_EBSR_T_EL_BUF_UDF             0x0040

#define UPD60611_EBSR_R_EL_BUF_OVF             0x0020

#define UPD60611_EBSR_R_EL_BUF_UDF             0x0010


//BER Counter register

#define UPD60611_BER_LNK_OK                    0x8000

#define UPD60611_BER_CNT_LNK_EN                0x4000

#define UPD60611_BER_CNT_TRIG                  0x3800

#define UPD60611_BER_WINDOW                    0x0780

#define UPD60611_BER_COUNT                     0x007F


//Diagnosis Control/Status register

#define UPD60611_DCSR_DIAG_INIT                0x4000

#define UPD60611_DCSR_ADC_MAX_VALUE            0x3F00

#define UPD60611_DCSR_DIAG_DONE                0x0080

#define UPD60611_DCSR_DIAG_POL                 0x0040

#define UPD60611_DCSR_DIAG_SEL_LINE            0x0020

#define UPD60611_DCSR_PW_DIAG                  0x001F


//Diagnosis Counter register

#define UPD60611_DCR_CNT_WINDOW                0xFF00

#define UPD60611_DCR_DIAGCNT                   0x00FF


//Special Control/Status Indications register

#define UPD60611_SCSIR_SWRST_FAST              0x1000

#define UPD60611_SCSIR_SQEOFF                  0x0800

#define UPD60611_SCSIR_FEFIEN                  0x0020

#define UPD60611_SCSIR_XPOL                    0x0010


//Interrupt Source Flags register

#define UPD60611_ISR_BER                       0x0400

#define UPD60611_ISR_FEQ                       0x0200

#define UPD60611_ISR_ENERGYON                  0x0080

#define UPD60611_ISR_AN_COMPLETE               0x0040

#define UPD60611_ISR_REMOTE_FAULT              0x0020

#define UPD60611_ISR_LINK_DOWN                 0x0010

#define UPD60611_ISR_AN_LP_ACK                 0x0008

#define UPD60611_ISR_PAR_DETECT_FAULT          0x0004

#define UPD60611_ISR_AN_PAGE_RECEIVED          0x0002


//Interrupt Enable register

#define UPD60611_IER_BER                       0x0400

#define UPD60611_IER_FEQ                       0x0200

#define UPD60611_IER_ENERGYON                  0x0080

#define UPD60611_IER_AN_COMPLETE               0x0040

#define UPD60611_IER_REMOTE_FAULT              0x0020

#define UPD60611_IER_LINK_DOWN                 0x0010

#define UPD60611_IER_AN_LP_ACK                 0x0008

#define UPD60611_IER_PAR_DETECT_FAULT          0x0004

#define UPD60611_IER_AN_PAGE_RECEIVED          0x0002


//PHY Special Control/Status register

#define UPD60611_PSCSR_AUTODONE                0x1000

#define UPD60611_PSCSR_4B5B_EN                 0x0040

#define UPD60611_PSCSR_HCDSPEED                0x001C

#define UPD60611_PSCSR_HCDSPEED_10BT_HD        0x0004

#define UPD60611_PSCSR_HCDSPEED_100BTX_HD      0x0008

#define UPD60611_PSCSR_HCDSPEED_10BT_FD        0x0014

#define UPD60611_PSCSR_HCDSPEED_100BTX_FD      0x0018

#define UPD60611_PSCSR_RX_DV_J2T               0x0002

#define UPD60611_PSCSR_SCRAMBLE_DIS            0x0001


//C++ guard

#ifdef __cplusplus

extern "C" {

#endif


//uPD60611 Ethernet PHY driver

extern const PhyDriver upd60611PhyDriver;


//uPD60611 related functions

error_t upd60611Init(NetInterface *interface);

void upd60611InitHook(NetInterface *interface);


void upd60611Tick(NetInterface *interface);


void upd60611EnableIrq(NetInterface *interface);

void upd60611DisableIrq(NetInterface *interface);


void upd60611EventHandler(NetInterface *interface);


void upd60611WritePhyReg(NetInterface *interface, uint8_t address,

   uint16_t data);


uint16_t upd60611ReadPhyReg(NetInterface *interface, uint8_t address);


void upd60611DumpPhyReg(NetInterface *interface);


//C++ guard

#ifdef __cplusplus

}

#endif


#endif

error_t
error_t
Error codes.
Definition error.h:43

nic.h
Network interface controller abstraction layer.

PhyDriver
Ethernet PHY driver.
Definition nic.h:308